Toshiba Satellite Z30-B-10W - Debian
Hardware info on main page.
Links
Links: Debian Administrator's Handbook - LVM, Heimdall,
cameramemoryspeed.com Internal SC card information,
local links
Acer Iconia Tab A700, Benq GL2460, Czurtek CZUR scanner, FluxEngine (Debian),
Archives: 2018, 2019, 2020, 2021
History
2023-04-15: sdb5 - I logged out and in again to load the new Xorg server.
2023-04-15: sdb5 - apt - upgrade
tingo@z30b:~$ sudo apt upgrade Reading package lists... Done Building dependency tree... Done Reading state information... Done Calculating upgrade... Done The following packages were automatically installed and are no longer required: linux-image-5.10.0-17-amd64 linux-image-5.10.0-19-amd64 Use 'sudo apt autoremove' to remove them. The following packages have been kept back: guile-2.2-libs libobjc4 The following packages will be upgraded: chromium chromium-common chromium-sandbox firefox-esr ghostscript libgs9 libgs9-common libopenimageio2.2 python3-cairosvg tzdata xserver-common xserver-xorg-core xserver-xorg-legacy 13 upgraded, 0 newly installed, 0 to remove and 2 not upgraded. Need to get 147 MB of archives. After this operation, 1,776 kB of additional disk space will be used. [..] Processing triggers for libc-bin (2.31-13+deb11u5) ... Processing triggers for man-db (2.9.4-2) ...
apt - autoremove
tingo@z30b:~$ sudo apt autoremove Reading package lists... Done Building dependency tree... Done Reading state information... Done The following packages will be REMOVED: linux-image-5.10.0-17-amd64 linux-image-5.10.0-19-amd64 0 upgraded, 0 newly installed, 2 to remove and 2 not upgraded. After this operation, 635 MB disk space will be freed. [..] Warning: os-prober will be executed to detect other bootable partitions. Its output will be used to detect bootable binaries on them and create new boot entries. Found unknown Linux distribution on /dev/sda2 Found Fedora 29 (Twenty Nine) on /dev/mapper/fedora-root Adding boot menu entry for UEFI Firmware Settings ... done
2023-03-11: sdb5 - reboot, a new kernel is in
tingo@z30b:~$ uname -a Linux z30b 5.10.0-21-amd64 #1 SMP Debian 5.10.162-1 (2023-01-21) x86_64 GNU/Linux
2023-03-11: sdb5 - apt - upgrade
tingo@z30b:~$ sudo apt upgrade Reading package lists... Done Building dependency tree... Done Reading state information... Done Calculating upgrade... Done The following package was automatically installed and is no longer required: linux-image-5.10.0-17-amd64 Use 'sudo apt autoremove' to remove it. The following NEW packages will be installed: linux-image-5.10.0-21-amd64 The following packages have been kept back: guile-2.2-libs libobjc4 The following packages will be upgraded: bind9-dnsutils bind9-host bind9-libs chromium chromium-common chromium-sandbox curl dnsutils firefox-esr gir1.2-javascriptcoregtk-4.0 gir1.2-webkit2-4.0 git git-man imagemagick imagemagick-6-common imagemagick-6.q16 kicad kicad-demos kicad-footprints kicad-libraries kicad-packages3d kicad-symbols libcurl3-gnutls libcurl4 libde265-0 libgnutls-dane0 libgnutls30 libimage-magick-perl libimage-magick-q16-perl libjavascriptcoregtk-4.0-18 libksba8 libmagickcore-6.q16-6 libmagickcore-6.q16-6-extra libmagickwand-6.q16-6 libnss3 libssl1.1 libtiff-tools libtiff5 libwebkit2gtk-4.0-37 linux-image-amd64 linux-libc-dev openjdk-11-jre openjdk-11-jre-headless openssl sudo xserver-common xserver-xorg-core xserver-xorg-legacy 48 upgraded, 1 newly installed, 0 to remove and 2 not upgraded. Need to get 731 MB of archives. After this operation, 327 MB of additional disk space will be used. [..] Processing triggers for desktop-file-utils (0.26-1) ... Processing triggers for hicolor-icon-theme (0.17-2) ... Processing triggers for libc-bin (2.31-13+deb11u5) ... Processing triggers for man-db (2.9.4-2) ... Processing triggers for shared-mime-info (2.0-1) ... Processing triggers for mailcap (3.69) ...
2022-12-21: sdb5 - reboot, Debian 11.6 is in
tingo@z30b:~$ cat /etc/debian_version
11.6
kernel
tingo@z30b:~$ uname -a Linux z30b 5.10.0-20-amd64 #1 SMP Debian 5.10.158-2 (2022-12-13) x86_64 GNU/Linux
2022-12-21: sdb5 - efibootmgr - check boot order
tingo@z30b:~$ efibootmgr BootCurrent: 0000 Timeout: 1 seconds BootOrder: 0009,0000,0006,0005,000A,0007 Boot0000* rEFInd Boot Manager Boot0001* LAN1 Boot0002* LAN1 Boot0003* Windows Boot Manager Boot0004* Windows Boot Manager Boot0005* HDD/SSD Boot0006* Fedora Boot0007* LAN2 Boot0008* Qubes Boot0009* debian Boot000A* LAN1
fix it
tingo@z30b:~$ sudo efibootmgr -o 0,9,6,5,a,7 BootCurrent: 0000 Timeout: 1 seconds BootOrder: 0000,0009,0006,0005,000A,0007 Boot0000* rEFInd Boot Manager Boot0001* LAN1 Boot0002* LAN1 Boot0003* Windows Boot Manager Boot0004* Windows Boot Manager Boot0005* HDD/SSD Boot0006* Fedora Boot0007* LAN2 Boot0008* Qubes Boot0009* debian Boot000A* LAN1
2022-12-21: sdb5 - apt - upgrade
tingo@z30b:~$ sudo apt upgrade Reading package lists... Done Building dependency tree... Done Reading state information... Done Calculating upgrade... Done The following NEW packages will be installed: linux-image-5.10.0-20-amd64 The following packages have been kept back: guile-2.2-libs libobjc4 The following packages will be upgraded: base-files chromium chromium-common chromium-sandbox distro-info-data firefox-esr grub-common grub-efi-amd64 grub-efi-amd64-bin grub-efi-amd64-signed grub2-common libbluray2 liblept5 libmariadb3 libnftables1 libopenexr25 libpq5 libspeechd2 libtasn1-6 libtinyxml2.6.2v5 libvlc-bin libvlc5 libvlccore9 libvncclient1 linux-image-amd64 linux-libc-dev mariadb-common mutt nano nftables python3-speechd speech-dispatcher speech-dispatcher-audio-plugins speech-dispatcher-espeak-ng vlc vlc-bin vlc-data vlc-l10n vlc-plugin-access-extra vlc-plugin-base vlc-plugin-notify vlc-plugin-qt vlc-plugin-samba vlc-plugin-skins2 vlc-plugin-video-output vlc-plugin-video-splitter vlc-plugin-visualization xfce4-helpers xfce4-settings xserver-common xserver-xorg-core xserver-xorg-legacy 52 upgraded, 1 newly installed, 0 to remove and 2 not upgraded. Need to get 226 MB of archives. After this operation, 339 MB of additional disk space will be used. [..] Processing triggers for shim-signed:amd64 (1.38+15.4-7) ... Processing triggers for libvlc-bin:amd64 (3.0.18-0+deb11u1) ...
2022-12-03: sdb5 - apt - upgrade
tingo@z30b:~$ sudo apt upgrade Reading package lists... Done Building dependency tree... Done Reading state information... Done Calculating upgrade... Done The following packages have been kept back: guile-2.2-libs libobjc4 The following packages will be upgraded: chromium chromium-common chromium-sandbox 3 upgraded, 0 newly installed, 0 to remove and 2 not upgraded. Need to get 70.9 MB of archives. After this operation, 7,168 B of additional disk space will be used. [..] Setting up chromium-sandbox (107.0.5304.121-1~deb11u1) ... Setting up chromium-common (107.0.5304.121-1~deb11u1) ... Setting up chromium (107.0.5304.121-1~deb11u1) ... Processing triggers for desktop-file-utils (0.26-1) ... Processing triggers for hicolor-icon-theme (0.17-2) ... Processing triggers for man-db (2.9.4-2) ... Processing triggers for mailcap (3.69) ...
2022-11-26: sdb5 - apt - upgrade
tingo@z30b:~$ sudo apt upgrade Reading package lists... Done Building dependency tree... Done Reading state information... Done Calculating upgrade... Done The following packages have been kept back: guile-2.2-libs libobjc4 The following packages will be upgraded: chromium chromium-common chromium-sandbox firefox-esr gir1.2-javascriptcoregtk-4.0 gir1.2-webkit2-4.0 grub-common grub-efi-amd64 grub-efi-amd64-bin grub-efi-amd64-signed grub2-common kicad kicad-demos kicad-footprints kicad-libraries kicad-symbols krb5-locales libavcodec58 libavdevice58 libavfilter7 libavformat58 libavresample4 libavutil56 libexpat1 libexpat1-dev libgraphicsmagick++-q16-12 libgraphicsmagick-q16-3 libgssapi-krb5-2 libjavascriptcoregtk-4.0-18 libk5crypto3 libkrb5-3 libkrb5support0 libntfs-3g883 libpixman-1-0 libpostproc55 libswresample3 libswscale5 libwebkit2gtk-4.0-37 libxml2 ntfs-3g python3-libxml2 tzdata xserver-common xserver-xorg-core xserver-xorg-legacy 45 upgraded, 0 newly installed, 0 to remove and 2 not upgraded. Need to get 251 MB of archives. After this operation, 72.7 kB disk space will be freed. [..] update-initramfs: Generating /boot/initrd.img-5.10.0-19-amd64 Processing triggers for hicolor-icon-theme (0.17-2) ... Processing triggers for libc-bin (2.31-13+deb11u5) ... Processing triggers for man-db (2.9.4-2) ... Processing triggers for ntp (1:4.2.8p15+dfsg-1) ... Processing triggers for shared-mime-info (2.0-1) ... Processing triggers for mailcap (3.69) ... Processing triggers for shim-signed:amd64 (1.38+15.4-7) ...
2022-10-31: sdb5 - get the dotnet install script
tingo@z30b:~/dl$ wget https://dot.net/v1/dotnet-install.sh [..] Saving to: ‘dotnet-install.sh’ [..] 2022-10-31 23:11:19 (110 KB/s) - ‘dotnet-install.sh’ saved [57823/57823]
make it executable
tingo@z30b:~/dl$ chmod u+x dotnet-install.sh
install dotnet runtime 6.0
tingo@z30b:~/dl$ ./dotnet-install.sh -c 6.0 --runtime dotnet dotnet-install: Note that the intended use of this script is for Continuous Integration (CI) scenarios, where: dotnet-install: - The SDK needs to be installed without user interaction and without admin rights. dotnet-install: - The SDK installation doesn't need to persist across multiple CI runs. dotnet-install: To set up a development environment or to run apps, use installers rather than this script. Visit https://dotnet.microsoft.com/download to get the installer. dotnet-install: Attempting to download using aka.ms link https://dotnetcli.azureedge.net/dotnet/Runtime/6.0.10/dotnet-runtime-6.0.10-linux-x64.tar.gz dotnet-install: Extracting zip from https://dotnetcli.azureedge.net/dotnet/Runtime/6.0.10/dotnet-runtime-6.0.10-linux-x64.tar.gz dotnet-install: Installed version is 6.0.10 dotnet-install: Adding to current process PATH: `/home/tingo/.dotnet`. Note: This change will be visible only when sourcing script. dotnet-install: Note that the script does not resolve dependencies during installation. dotnet-install: To check the list of dependencies, go to https://docs.microsoft.com/dotnet/core/install, select your operating system and check the "Dependencies" section. dotnet-install: Installation finished successfully.
check PATH
tingo@z30b:~/dl$ echo $PATH /usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games
add dotnet
tingo@z30b:~$ export PATH=${PATH}:$HOME/.dotnet tingo@z30b:~$ echo $PATH /usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games:/home/tingo/.dotnet
2022-10-29: sdb5 - reboot, Debian 11.5 is in
tingo@z30b:~$ cat /etc/debian_version
11.5
kernel
tingo@z30b:~$ uname -a Linux z30b 5.10.0-19-amd64 #1 SMP Debian 5.10.149-2 (2022-10-21) x86_64 GNU/Linux
2022-10-29: sdb5 - efi - boot order - check
tingo@z30b:~$ efibootmgr BootCurrent: 0000 Timeout: 1 seconds BootOrder: 0009,0000,0006,0005,000A,0007 Boot0000* rEFInd Boot Manager Boot0001* LAN1 Boot0002* LAN1 Boot0003* Windows Boot Manager Boot0004* Windows Boot Manager Boot0005* HDD/SSD Boot0006* Fedora Boot0007* LAN2 Boot0008* Qubes Boot0009* debian Boot000A* LAN1
change it back
tingo@z30b:~$ sudo efibootmgr -o 0,9,6,5,a,7 BootCurrent: 0000 Timeout: 1 seconds BootOrder: 0000,0009,0006,0005,000A,0007 Boot0000* rEFInd Boot Manager Boot0001* LAN1 Boot0002* LAN1 Boot0003* Windows Boot Manager Boot0004* Windows Boot Manager Boot0005* HDD/SSD Boot0006* Fedora Boot0007* LAN2 Boot0008* Qubes Boot0009* debian Boot000A* LAN1
2022-10-29: sdb5 - apt - autoremove
tingo@z30b:~$ sudo apt autoremove [sudo] password for tingo: Reading package lists... Done Building dependency tree... Done Reading state information... Done The following packages will be REMOVED: linux-image-5.10.0-13-amd64 linux-image-5.10.0-14-amd64 sse3-support 0 upgraded, 0 newly installed, 3 to remove and 2 not upgraded. After this operation, 604 MB disk space will be freed. [..] (Reading database ... 255863 files and directories currently installed.) Removing linux-image-5.10.0-13-amd64 (5.10.106-1) ... /etc/kernel/postrm.d/initramfs-tools: update-initramfs: Deleting /boot/initrd.img-5.10.0-13-amd64 /etc/kernel/postrm.d/zz-update-grub: Generating grub configuration file ... Found background image: /usr/share/images/desktop-base/desktop-grub.png Found linux image: /boot/vmlinuz-5.10.0-19-amd64 Found initrd image: /boot/initrd.img-5.10.0-19-amd64 Found linux image: /boot/vmlinuz-5.10.0-17-amd64 Found initrd image: /boot/initrd.img-5.10.0-17-amd64 Found linux image: /boot/vmlinuz-5.10.0-14-amd64 Found initrd image: /boot/initrd.img-5.10.0-14-amd64 Warning: os-prober will be executed to detect other bootable partitions. Its output will be used to detect bootable binaries on them and create new boot entries. Found unknown Linux distribution on /dev/sda2 Found Fedora 29 (Twenty Nine) on /dev/mapper/fedora-root Adding boot menu entry for UEFI Firmware Settings ... done Removing linux-image-5.10.0-14-amd64 (5.10.113-1) ... /etc/kernel/postrm.d/initramfs-tools: update-initramfs: Deleting /boot/initrd.img-5.10.0-14-amd64 /etc/kernel/postrm.d/zz-update-grub: Generating grub configuration file ... Found background image: /usr/share/images/desktop-base/desktop-grub.png Found linux image: /boot/vmlinuz-5.10.0-19-amd64 Found initrd image: /boot/initrd.img-5.10.0-19-amd64 Found linux image: /boot/vmlinuz-5.10.0-17-amd64 Found initrd image: /boot/initrd.img-5.10.0-17-amd64 Warning: os-prober will be executed to detect other bootable partitions. Its output will be used to detect bootable binaries on them and create new boot entries. Found unknown Linux distribution on /dev/sda2 Found Fedora 29 (Twenty Nine) on /dev/mapper/fedora-root Adding boot menu entry for UEFI Firmware Settings ... done Removing sse3-support (6) ...
apt - autoclean
tingo@z30b:~$ sudo apt autoclean Reading package lists... Done Building dependency tree... Done Reading state information... Done
2022-10-29: sdb5 - apt - upgrade
tingo@z30b:~$ sudo apt upgrade Reading package lists... Done Building dependency tree... Done Reading state information... Done Calculating upgrade... Done The following packages were automatically installed and are no longer required: linux-image-5.10.0-13-amd64 sse3-support Use 'sudo apt autoremove' to remove them. The following NEW packages will be installed: linux-image-5.10.0-19-amd64 The following packages have been kept back: guile-2.2-libs libobjc4 The following packages will be upgraded: avahi-autoipd avahi-daemon avahi-utils base-files bind9-dnsutils bind9-host bind9-libs chromium chromium-common chromium-sandbox curl dbus dbus-user-session dbus-x11 dnsutils dpkg dpkg-dev firefox-esr fonts-opensymbol freecad freecad-common freecad-python3 gdal-data gir1.2-ayatanaappindicator3-0.1 gir1.2-gdkpixbuf-2.0 gir1.2-javascriptcoregtk-4.0 gir1.2-poppler-0.18 gir1.2-webkit2-4.0 grub-common grub-efi-amd64 grub-efi-amd64-bin grub-efi-amd64-signed grub2-common isc-dhcp-client isc-dhcp-common kicad kicad-demos kicad-footprints kicad-libraries kicad-packages3d kicad-symbols kicad-templates krb5-locales lib32z1 libavahi-client3 libavahi-common-data libavahi-common3 libavahi-core7 libavahi-glib1 libavahi-gobject0 libayatana-appindicator3-1 libc-bin libc-dev-bin libc-devtools libc-l10n libc6 libc6-dev libc6-i386 libcurl3-gnutls libcurl4 libdbus-1-3 libdpkg-perl libexpat1 libexpat1-dev libfreecad-python3-0.19 libgdal28 libgdk-pixbuf-2.0-0 libgdk-pixbuf2.0-bin libgdk-pixbuf2.0-common libgssapi-krb5-2 libhttp-daemon-perl libjavascriptcoregtk-4.0-18 libjuh-java libjurt-java libk5crypto3 libkrb5-3 libkrb5support0 libksba8 liblibreoffice-java libmaven-shared-utils-java libnss-systemd libpam-systemd libpcre2-16-0 libpcre2-8-0 libpoppler-cpp0v5 libpoppler-glib8 libpoppler102 libpq5 libreoffice-base libreoffice-base-core libreoffice-base-drivers libreoffice-calc libreoffice-common libreoffice-core libreoffice-draw libreoffice-gtk3 libreoffice-help-common libreoffice-help-en-us libreoffice-impress libreoffice-java-common libreoffice-math libreoffice-report-builder libreoffice-report-builder-bin libreoffice-sdbc-firebird libreoffice-sdbc-hsqldb libreoffice-sdbc-mysql libreoffice-sdbc-postgresql libreoffice-style-colibre libreoffice-writer libridl-java libsystemd0 libudev1 libuno-cppu3 libuno-cppuhelpergcc3-3 libuno-purpenvhelpergcc3-3 libuno-sal3 libuno-salhelpergcc3-3 libunoil-java libunoloader-java libwebkit2gtk-4.0-37 libxnvctrl0 libxslt1.1 linux-image-amd64 linux-libc-dev locales mokutil poppler-utils python3-uno systemd systemd-sysv teams tzdata udev uno-libs-private ure xsltproc zlib1g zlib1g-dev 138 upgraded, 1 newly installed, 0 to remove and 2 not upgraded. Need to get 941 MB of archives. After this operation, 330 MB of additional disk space will be used. [..] Setting up grub-efi-amd64 (2.06-3~deb11u2) ... Installing for x86_64-efi platform. File descriptor 3 (pipe:[9687073]) leaked on vgs invocation. Parent PID 944540: grub-install File descriptor 3 (pipe:[9687073]) leaked on vgs invocation. Parent PID 944540: grub-install Installation finished. No error reported. [..] update-initramfs: Generating /boot/initrd.img-5.10.0-19-amd64 Processing triggers for hicolor-icon-theme (0.17-2) ... Processing triggers for libc-bin (2.31-13+deb11u5) ... Processing triggers for shim-signed:amd64 (1.38+15.4-7) ...
a reboot remains.
2022-09-04: sdb5 - my github token is about to expire, so I generated a new one and updated my files. See entries 2021-08-17 and 2021-09-10 for details.
2022-08-19: sdb5 - reboot, Debian 11.4 is in
tingo@z30b:~$ cat /etc/debian_version
11.4
and a new kernel
tingo@z30b:~$ uname -a Linux z30b 5.10.0-17-amd64 #1 SMP Debian 5.10.136-1 (2022-08-13) x86_64 GNU/Linux
2022-08-19: sdb5 - apt - upgrade
tingo@z30b:~$ sudo apt upgrade Reading package lists... Done Building dependency tree... Done Reading state information... Done Calculating upgrade... Done The following NEW packages will be installed: linux-image-5.10.0-17-amd64 The following packages have been kept back: guile-2.2-libs libobjc4 The following packages will be upgraded: base-files bash blender blender-data chromium chromium-common chromium-sandbox curl dirmngr distro-info-data dpkg dpkg-dev exo-utils firefox-esr gir1.2-javascriptcoregtk-4.0 gir1.2-nm-1.0 gir1.2-webkit2-4.0 gnupg gnupg-agent gnupg-l10n gnupg-utils gpg gpg-agent gpg-wks-client gpg-wks-server gpgconf gpgsm gpgv gsasl-common gstreamer1.0-gtk3 gstreamer1.0-plugins-good gstreamer1.0-pulseaudio kicad kicad-demos kicad-footprints kicad-libraries kicad-packages3d kicad-symbols libcurl3-gnutls libcurl4 libdpkg-perl libexo-2-0 libexo-common libfreetype6 libfribidi0 libgnutls-dane0 libgnutls30 libgsasl7 libjavascriptcoregtk-4.0-18 libldb2 libnm0 libntfs-3g883 libsdl2-2.0-0 libsmbclient libsnmp-base libsnmp40 libssl1.1 libtirpc-common libtirpc-dev libtirpc3 libvlc-bin libvlc5 libvlccore9 libwbclient0 libwebkit2gtk-4.0-37 libxnvctrl0 linux-image-amd64 linux-libc-dev logrotate mutt nano network-manager ntfs-3g openjdk-11-jre openjdk-11-jre-headless openssh-client openssh-server openssh-sftp-server openssl orca python3-ldb samba-libs tcpdump tzdata unzip usb.ids vlc vlc-bin vlc-data vlc-l10n vlc-plugin-access-extra vlc-plugin-base vlc-plugin-notify vlc-plugin-qt vlc-plugin-samba vlc-plugin-skins2 vlc-plugin-video-output vlc-plugin-video-splitter vlc-plugin-visualization wireless-regdb xserver-common xserver-xorg-core xserver-xorg-legacy 103 upgraded, 1 newly installed, 0 to remove and 2 not upgraded. Need to get 804 MB of archives. After this operation, 348 MB of additional disk space will be used. [..] update-initramfs: Generating /boot/initrd.img-5.10.0-17-amd64 Processing triggers for hicolor-icon-theme (0.17-2) ... Processing triggers for libc-bin (2.31-13+deb11u3) ... Processing triggers for man-db (2.9.4-2) ... Processing triggers for cracklib-runtime (2.9.6-3.4) ... Processing triggers for ntp (1:4.2.8p15+dfsg-1) ... Processing triggers for dbus (1.12.20-2) ... Processing triggers for shared-mime-info (2.0-1) ... Processing triggers for mailcap (3.69) ... Processing triggers for desktop-file-utils (0.26-1) ... Processing triggers for libvlc-bin:amd64 (3.0.17.4-0+deb11u1) ...
2022-08-17: sdb5 - connecting a WD My Passport 2TB external drive gives this in /var/log/messages:
Aug 17 16:54:13 z30b kernel: [8218635.907963] usb 2-2: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd Aug 17 16:54:13 z30b kernel: [8218635.929082] usb 2-2: New USB device found, idVendor=1058, idProduct=2626, bcdDevice=10.34 Aug 17 16:54:13 z30b kernel: [8218635.929088] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Aug 17 16:54:13 z30b kernel: [8218635.929092] usb 2-2: Product: My Passport 2626 Aug 17 16:54:13 z30b kernel: [8218635.929094] usb 2-2: Manufacturer: Western Digital Aug 17 16:54:13 z30b kernel: [8218635.929097] usb 2-2: SerialNumber: 57583832413731304E394E37 Aug 17 16:54:13 z30b kernel: [8218635.930622] usb-storage 2-2:1.0: USB Mass Storage device detected Aug 17 16:54:13 z30b kernel: [8218635.930954] scsi host3: usb-storage 2-2:1.0 Aug 17 16:54:13 z30b mtp-probe: checking bus 2, device 3: "/sys/devices/pci0000:00/0000:00:14.0/usb2/2-2" Aug 17 16:54:13 z30b mtp-probe: bus: 2, device: 3 was not an MTP device Aug 17 16:54:13 z30b mtp-probe: checking bus 2, device 3: "/sys/devices/pci0000:00/0000:00:14.0/usb2/2-2" Aug 17 16:54:13 z30b mtp-probe: bus: 2, device: 3 was not an MTP device Aug 17 16:54:14 z30b kernel: [8218636.936796] scsi 3:0:0:0: Direct-Access WD My Passport 2626 1034 PQ: 0 ANSI: 6 Aug 17 16:54:14 z30b kernel: [8218636.937124] scsi 3:0:0:1: Enclosure WD SES Device 1034 PQ: 0 ANSI: 6 Aug 17 16:54:14 z30b kernel: [8218636.938578] sd 3:0:0:0: Attached scsi generic sg1 type 0 Aug 17 16:54:14 z30b kernel: [8218636.938996] scsi 3:0:0:1: Attached scsi generic sg2 type 13 Aug 17 16:54:14 z30b kernel: [8218636.943810] sd 3:0:0:0: [sdb] Spinning up disk... Aug 17 16:54:19 z30b kernel: [8218637.959877] ....ready Aug 17 16:54:19 z30b kernel: [8218641.032659] sd 3:0:0:0: [sdb] 3906963456 512-byte logical blocks: (2.00 TB/1.82 TiB) Aug 17 16:54:19 z30b kernel: [8218641.032988] sd 3:0:0:0: [sdb] Write Protect is off Aug 17 16:54:19 z30b kernel: [8218641.164843] sdb: sdb1 Aug 17 16:54:19 z30b kernel: [8218641.181753] sd 3:0:0:0: [sdb] Attached SCSI disk Aug 17 16:54:19 z30b kernel: [8218641.186275] ses 3:0:0:1: Attached Enclosure device
lsusb shows
tingo@z30b:~/bitraf/infrastructure$ lsusb -d 1058:2626 Bus 002 Device 003: ID 1058:2626 Western Digital Technologies, Inc. My Passport (WDBPKJ)
and lsusb -t confimrs that it is superspeed
tingo@z30b:~/bitraf/infrastructure$ lsusb -t /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 5000M |__ Port 2: Dev 3, If 0, Class=Mass Storage, Driver=usb-storage, 5000M /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/11p, 480M |__ Port 5: Dev 2, If 1, Class=Human Interface Device, Driver=usbhid, 1.5M |__ Port 5: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M |__ Port 6: Dev 3, If 0, Class=Hub, Driver=hub/4p, 480M |__ Port 7: Dev 4, If 0, Class=Video, Driver=uvcvideo, 480M |__ Port 7: Dev 4, If 1, Class=Video, Driver=uvcvideo, 480M |__ Port 8: Dev 5, If 1, Class=Wireless, Driver=btusb, 12M |__ Port 8: Dev 5, If 0, Class=Wireless, Driver=btusb, 12M
mounting the drive reveals software for Mac and windows:
tingo@z30b:~/bitraf/infrastructure$ ll "/media/tingo/My Passport" total 1168 drwxrwxrwx 1 tingo tingo 4096 Sep 27 2021 ./ drwxr-x---+ 4 root root 4096 Aug 17 17:00 ../ -rwxrwxrwx 2 tingo tingo 509505 Jul 9 2021 'Install Western Digital Software for Mac.dmg'* -rwxrwxrwx 2 tingo tingo 671824 Jul 9 2021 'Install Western Digital Software for Windows.exe'*
that's all.
2022-07-17: sdb5 - apt - install mmc-utils
tingo@z30b:~$ sudo apt install mmc-utils Reading package lists... Done Building dependency tree... Done Reading state information... Done The following NEW packages will be installed: mmc-utils 0 upgraded, 1 newly installed, 0 to remove and 7 not upgraded. Need to get 40.3 kB of archives. After this operation, 126 kB of additional disk space will be used. Get:1 http://ftp.no.debian.org/debian bullseye/main amd64 mmc-utils amd64 0+git20180327.b4fe0c8c-1+b1 [40.3 kB] Fetched 40.3 kB in 0s (336 kB/s) Selecting previously unselected package mmc-utils. (Reading database ... 246344 files and directories currently installed.) Preparing to unpack .../mmc-utils_0+git20180327.b4fe0c8c-1+b1_amd64.deb ... Unpacking mmc-utils (0+git20180327.b4fe0c8c-1+b1) ... Setting up mmc-utils (0+git20180327.b4fe0c8c-1+b1) ... Processing triggers for man-db (2.9.4-2) ...
contents
tingo@z30b:~$ dpkg-query -L mmc-utils /. /usr /usr/bin /usr/bin/mmc /usr/share /usr/share/doc /usr/share/doc/mmc-utils /usr/share/doc/mmc-utils/changelog.Debian.amd64.gz /usr/share/doc/mmc-utils/changelog.Debian.gz /usr/share/doc/mmc-utils/copyright /usr/share/man /usr/share/man/man1 /usr/share/man/man1/mmc.1.gz
2022-07-14: sdb5 - I used gparted to create a large ext4 partition on the PNY microSD card, the f3write to fill it
tingo@z30b:~$ sudo f3write /mnt F3 write 8.0 Copyright (C) 2010 Digirati Internet LTDA. This is free software; see the source for copying conditions. Free space: 14.23 GB Creating file 1.h2w ... OK! Creating file 2.h2w ... OK! Creating file 3.h2w ... OK! Creating file 4.h2w ... OK! Creating file 5.h2w ... OK! Creating file 6.h2w ... OK! Creating file 7.h2w ... OK! Creating file 8.h2w ... OK! Creating file 9.h2w ... OK! Creating file 10.h2w ... OK! Creating file 11.h2w ... OK! Creating file 12.h2w ... OK! Creating file 13.h2w ... OK! Creating file 14.h2w ... OK! Creating file 15.h2w ... OK! Free space: 16.00 MB Average writing speed: 7.84 MB/s
now use f3read to check it
tingo@z30b:~$ sudo f3read /mnt F3 read 8.0 Copyright (C) 2010 Digirati Internet LTDA. This is free software; see the source for copying conditions. SECTORS ok/corrupted/changed/overwritten Validating file 1.h2w ... 2096944/ 208/ 0/ 0 Validating file 2.h2w ... 2097014/ 138/ 0/ 0 Validating file 3.h2w ... 2096060/ 68/ 0/ 1024 Validating file 4.h2w ... 2097077/ 75/ 0/ 0 Validating file 5.h2w ... 2097073/ 79/ 0/ 0 Validating file 6.h2w ... 2097080/ 72/ 0/ 0 Validating file 7.h2w ... 2096055/ 73/ 0/ 1024 Validating file 8.h2w ... 2095009/ 95/ 0/ 2048 Validating file 9.h2w ... 2096042/ 86/ 0/ 1024 Validating file 10.h2w ... 2097046/ 106/ 0/ 0 Validating file 11.h2w ... 2095011/ 93/ 0/ 2048 Validating file 12.h2w ... 2097058/ 94/ 0/ 0 Validating file 13.h2w ... 2097071/ 81/ 0/ 0 Validating file 14.h2w ... 2097084/ 68/ 0/ 0 Validating file 15.h2w ... 455609/ 15/ 0/ 0 Data OK: 14.21 GB (29807233 sectors) Data LOST: 4.16 MB (8519 sectors) Corrupted: 675.50 KB (1351 sectors) Slightly changed: 0.00 Byte (0 sectors) Overwritten: 3.50 MB (7168 sectors) Average reading speed: 22.25 MB/s
interesting. So f3write / f3read is able to detect a SD card that is not 100% working too.
2022-07-14: sdb5 - more info about the PNY 16 GB microSD card - cid
tingo@z30b:~$ cat /sys/block/mmcblk0/device/cid 6f0013534d4920200000000000013601
manufacturer id
tingo@z30b:~$ cat /sys/block/mmcblk0/device/manfid 0x00006f
oem id
tingo@z30b:~$ cat /sys/block/mmcblk0/device/oemid 0x0013
product name
tingo@z30b:~$ cat /sys/block/mmcblk0/device/name SMI
csd (card specific data) register
tingo@z30b:~$ cat /sys/block/mmcblk0/device/csd 400e00325b590000747b7f800a400001
manufacturing date
tingo@z30b:~$ cat /sys/block/mmcblk0/device/date
06/2019
product serial number
tingo@z30b:~$ cat /sys/block/mmcblk0/device/serial 0x00000000
a few useful bits in there.
2022-07-14: sdb5 - testing a 16 GB PNY microSD card with f3probe from f3 package:
tingo@z30b:~$ sudo f3probe /dev/mmcblk0 [sudo] password for tingo: F3 probe 8.0 Copyright (C) 2010 Digirati Internet LTDA. This is free software; see the source for copying conditions. WARNING: Probing normally takes from a few seconds to 15 minutes, but it can take longer. Please be patient. Probe finished, recovering blocks... Done Good news: The device `/dev/mmcblk0' is the real thing Device geometry: *Usable* size: 14.56 GB (30535680 blocks) Announced size: 14.56 GB (30535680 blocks) Module: 16.00 GB (2^34 Bytes) Approximate cache size: 0.00 Byte (0 blocks), need-reset=no Physical block size: 512.00 Byte (2^9 Bytes) Probe time: 8'26"
well, I know for a fact that this card is bad / non-working so this wasn't that useful here.
2022-06-12: sda6 - apt - install minicom
tingo@z30b:~$ sudo apt install minicom Reading package lists... Done Building dependency tree... Done Reading state information... Done The following additional packages will be installed: lrzsz The following NEW packages will be installed: lrzsz minicom 0 upgraded, 2 newly installed, 0 to remove and 7 not upgraded. Need to get 375 kB of archives. After this operation, 1,622 kB of additional disk space will be used. [..] Setting up minicom (2.8-2) ... Setting up lrzsz (0.12.21-10+b1) ... Processing triggers for desktop-file-utils (0.26-1) ... Processing triggers for man-db (2.9.4-2) ... Processing triggers for mailcap (3.69) ...
install ckermit
tingo@z30b:~$ sudo apt install ckermit Reading package lists... Done Building dependency tree... Done Reading state information... Done The following additional packages will be installed: openbsd-inetd tcpd The following NEW packages will be installed: ckermit openbsd-inetd tcpd 0 upgraded, 3 newly installed, 0 to remove and 7 not upgraded. Need to get 1,384 kB of archives. After this operation, 3,589 kB of additional disk space will be used. [..] Setting up ckermit (305~alpha02-1) ... Use of uninitialized value $_ in pattern match (m//) at /usr/share/perl5/DebianNet.pm line 589. Setting up openbsd-inetd (0.20160825-5) ... Created symlink /etc/systemd/system/multi-user.target.wants/inetd.service → /lib/systemd/system/inetd.service. Processing triggers for man-db (2.9.4-2) ...
2022-06-08: sdb5 - apt - upgrade
tingo@z30b:~$ sudo apt upgrade Reading package lists... Done Building dependency tree... Done Reading state information... Done Calculating upgrade... Done The following packages have been kept back: guile-2.2-libs libobjc4 The following packages will be upgraded: chromium chromium-common chromium-sandbox cups cups-bsd cups-client cups-common cups-core-drivers cups-daemon cups-ipp-utils cups-ppdc cups-server-common dpkg dpkg-dev firefox-esr gir1.2-javascriptcoregtk-4.0 gir1.2-webkit2-4.0 kicad kicad-demos kicad-footprints kicad-libraries kicad-packages3d kicad-symbols libcups2 libcupsimage2 libdpkg-perl libjavascriptcoregtk-4.0-18 libldap-2.4-2 libldap-common libssl1.1 libwebkit2gtk-4.0-37 libxml2 openssl python3-libxml2 rsyslog 35 upgraded, 0 newly installed, 0 to remove and 2 not upgraded. Need to get 606 MB of archives. After this operation, 4,391 kB of additional disk space will be used. [..] Processing triggers for hicolor-icon-theme (0.17-2) ... Processing triggers for libc-bin (2.31-13+deb11u3) ...
2022-05-14: sdb5 - apt - autoremove
tingo@z30b:~$ sudo apt autoremove Reading package lists... Done Building dependency tree... Done Reading state information... Done The following packages will be REMOVED: linux-image-5.10.0-10-amd64 0 upgraded, 0 newly installed, 1 to remove and 2 not upgraded. After this operation, 302 MB disk space will be freed. Do you want to continue? [Y/n] y (Reading database ... 250905 files and directories currently installed.) Removing linux-image-5.10.0-10-amd64 (5.10.84-1) ... /etc/kernel/postrm.d/initramfs-tools: update-initramfs: Deleting /boot/initrd.img-5.10.0-10-amd64 /etc/kernel/postrm.d/zz-update-grub: Generating grub configuration file ... Found background image: /usr/share/images/desktop-base/desktop-grub.png Found linux image: /boot/vmlinuz-5.10.0-14-amd64 Found initrd image: /boot/initrd.img-5.10.0-14-amd64 Found linux image: /boot/vmlinuz-5.10.0-13-amd64 Found initrd image: /boot/initrd.img-5.10.0-13-amd64 Found unknown Linux distribution on /dev/sda2 Found Fedora 29 (Twenty Nine) on /dev/mapper/fedora-root Adding boot menu entry for EFI firmware configuration done
2022-05-14: sdb5 - reboot, a new kernel is in
tingo@z30b:~$ uname -a Linux z30b 5.10.0-14-amd64 #1 SMP Debian 5.10.113-1 (2022-04-29) x86_64 GNU/Linux
2022-05-14: sdb5 - apt - upgrade
tingo@z30b:~$ sudo apt upgrade Reading package lists... Done Building dependency tree... Done Reading state information... Done Calculating upgrade... Done The following NEW packages will be installed: linux-image-5.10.0-14-amd64 sse3-support The following packages have been kept back: guile-2.2-libs libobjc4 The following packages will be upgraded: chromium chromium-common chromium-sandbox firefox-esr gzip libavcodec58 libavdevice58 libavfilter7 libavformat58 libavresample4 libavutil56 liblzma5 libpostproc55 libpq5 libswresample3 libswscale5 linux-image-amd64 linux-libc-dev openjdk-11-jre openjdk-11-jre-headless teams xz-utils 22 upgraded, 2 newly installed, 0 to remove and 2 not upgraded. Need to get 313 MB of archives. After this operation, 301 MB of additional disk space will be used. [..] /etc/kernel/postinst.d/initramfs-tools: update-initramfs: Generating /boot/initrd.img-5.10.0-14-amd64 /etc/kernel/postinst.d/zz-update-grub: Generating grub configuration file ... Found background image: /usr/share/images/desktop-base/desktop-grub.png Found linux image: /boot/vmlinuz-5.10.0-14-amd64 Found initrd image: /boot/initrd.img-5.10.0-14-amd64 Found linux image: /boot/vmlinuz-5.10.0-13-amd64 Found initrd image: /boot/initrd.img-5.10.0-13-amd64 Found linux image: /boot/vmlinuz-5.10.0-10-amd64 Found initrd image: /boot/initrd.img-5.10.0-10-amd64 Found unknown Linux distribution on /dev/sda2 Found Fedora 29 (Twenty Nine) on /dev/mapper/fedora-root Adding boot menu entry for EFI firmware configuration done [..] Processing triggers for mailcap (3.69) ...
2022-04-18: sdb5 - apt - upgrade
ingo@z30b:~$ sudo apt upgrade Reading package lists... Done Building dependency tree... Done Reading state information... Done Calculating upgrade... Done The following packages have been kept back: guile-2.2-libs libobjc4 The following packages will be upgraded: chromium chromium-common chromium-sandbox 3 upgraded, 0 newly installed, 0 to remove and 2 not upgraded. Need to get 67.0 MB of archives. After this operation, 0 B of additional disk space will be used. [..] Preparing to unpack .../chromium_100.0.4896.127-1~deb11u1_amd64.deb ... Unpacking chromium (100.0.4896.127-1~deb11u1) over (100.0.4896.88-1~deb11u1) ... Preparing to unpack .../chromium-sandbox_100.0.4896.127-1~deb11u1_amd64.deb ... Unpacking chromium-sandbox (100.0.4896.127-1~deb11u1) over (100.0.4896.88-1~deb11u1) ... Preparing to unpack .../chromium-common_100.0.4896.127-1~deb11u1_amd64.deb ... Unpacking chromium-common (100.0.4896.127-1~deb11u1) over (100.0.4896.88-1~deb11u1) ... Setting up chromium-sandbox (100.0.4896.127-1~deb11u1) ... Setting up chromium-common (100.0.4896.127-1~deb11u1) ... Setting up chromium (100.0.4896.127-1~deb11u1) ... Processing triggers for desktop-file-utils (0.26-1) ... Processing triggers for hicolor-icon-theme (0.17-2) ... Processing triggers for man-db (2.9.4-2) ... Processing triggers for mailcap (3.69) ...
2022-04-15: sdb5 - apt - install KiCad from backports
tingo@z30b:~$ sudo apt -t bullseye-backports install kicad kicad-demos kicad-footprints kicad-libraries kicad-symbols kicad-templates Reading package lists... Done Building dependency tree... Done Reading state information... Done The following additional packages will be installed: kicad-packages3d Suggested packages: extra-xdg-menus kicad-doc-ca | kicad-doc-de | kicad-doc-en | kicad-doc-es | kicad-doc-fr | kicad-doc-id | kicad-doc-it | kicad-doc-ja | kicad-doc-pl | kicad-doc-ru | kicad-doc-zh The following packages will be upgraded: kicad kicad-demos kicad-footprints kicad-libraries kicad-packages3d kicad-symbols kicad-templates 7 upgraded, 0 newly installed, 0 to remove and 105 not upgraded. Need to get 448 MB of archives. After this operation, 279 MB of additional disk space will be used. [..] dpkg: considering deconfiguration of kicad, which would be broken by installation of kicad-templates ... dpkg: yes, will deconfigure kicad (broken by kicad-templates) [..] Setting up kicad-footprints (6.0.4-1~bpo11+1) ... Setting up kicad-packages3d (6.0.4-1~bpo11+1) ... Setting up kicad-demos (6.0.4+dfsg-1~bpo11+1) ... Setting up kicad-templates (6.0.0-1~bpo11+1) ... Setting up kicad-symbols (6.0.4-1~bpo11+1) ... Setting up kicad (6.0.4+dfsg-1~bpo11+1) ... Setting up kicad-libraries (6.0.4+dfsg-1~bpo11+1) ... Processing triggers for desktop-file-utils (0.26-1) ... Processing triggers for hicolor-icon-theme (0.17-2) ... Processing triggers for libc-bin (2.31-13+deb11u3) ... Processing triggers for man-db (2.9.4-2) ... Processing triggers for shared-mime-info (2.0-1) ... Processing triggers for mailcap (3.69) ...
2022-04-15: sdb5 - apt - KiCad 6.0.4 is available in backports
tingo@z30b:~$ sudo apt list -a kicad* Listing... Done kicad-demos/bullseye-backports 6.0.4+dfsg-1~bpo11+1 all kicad-demos/stable,now 5.1.9+dfsg1-1 all [installed,automatic] kicad-doc-ca/bullseye-backports 6.0.4+dfsg-1~bpo11+1 all kicad-doc-ca/stable 5.1.9+dfsg1-1 all kicad-doc-de/bullseye-backports 6.0.4+dfsg-1~bpo11+1 all kicad-doc-de/stable 5.1.9+dfsg1-1 all kicad-doc-en/bullseye-backports 6.0.4+dfsg-1~bpo11+1 all kicad-doc-en/stable 5.1.9+dfsg1-1 all kicad-doc-es/bullseye-backports 6.0.4+dfsg-1~bpo11+1 all kicad-doc-es/stable 5.1.9+dfsg1-1 all kicad-doc-fr/bullseye-backports 6.0.4+dfsg-1~bpo11+1 all kicad-doc-fr/stable 5.1.9+dfsg1-1 all kicad-doc-id/bullseye-backports 6.0.4+dfsg-1~bpo11+1 all kicad-doc-id/stable 5.1.9+dfsg1-1 all kicad-doc-it/bullseye-backports 6.0.4+dfsg-1~bpo11+1 all kicad-doc-it/stable 5.1.9+dfsg1-1 all kicad-doc-ja/bullseye-backports 6.0.4+dfsg-1~bpo11+1 all kicad-doc-ja/stable 5.1.9+dfsg1-1 all kicad-doc-pl/bullseye-backports 6.0.4+dfsg-1~bpo11+1 all kicad-doc-pl/stable 5.1.9+dfsg1-1 all kicad-doc-ru/bullseye-backports 6.0.4+dfsg-1~bpo11+1 all kicad-doc-ru/stable 5.1.9+dfsg1-1 all kicad-doc-zh/bullseye-backports 6.0.4+dfsg-1~bpo11+1 all kicad-doc-zh/stable 5.1.9+dfsg1-1 all kicad-footprints/bullseye-backports 6.0.4-1~bpo11+1 all kicad-footprints/stable,now 5.1.7-1 all [installed,automatic] kicad-libraries/bullseye-backports 6.0.4+dfsg-1~bpo11+1 all kicad-libraries/stable,now 5.1.9+dfsg1-1 all [installed,automatic] kicad-packages3d/bullseye-backports 6.0.4-1~bpo11+1 all kicad-packages3d/stable,now 5.1.7-1 all [installed] kicad-symbols/bullseye-backports 6.0.4-1~bpo11+1 all kicad-symbols/stable,now 5.1.9-1 all [installed,automatic] kicad-templates/bullseye-backports 6.0.0-1~bpo11+1 all kicad-templates/stable,now 5.1.7-1 all [installed,automatic] kicad/bullseye-backports 6.0.4+dfsg-1~bpo11+1 amd64 kicad/stable,now 5.1.9+dfsg1-1 amd64 [installed]
non backports one is still 5.1
tingo@z30b:~$ sudo apt list --installed kicad* Listing... Done kicad-demos/stable,now 5.1.9+dfsg1-1 all [installed,automatic] kicad-footprints/stable,now 5.1.7-1 all [installed,automatic] kicad-libraries/stable,now 5.1.9+dfsg1-1 all [installed,automatic] kicad-packages3d/stable,now 5.1.7-1 all [installed] kicad-symbols/stable,now 5.1.9-1 all [installed,automatic] kicad-templates/stable,now 5.1.7-1 all [installed,automatic] kicad/stable,now 5.1.9+dfsg1-1 amd64 [installed]
2022-04-15: sdb5 - apt - upgrade
tingo@z30b:~$ sudo apt upgrade Reading package lists... Done Building dependency tree... Done Reading state information... Done Calculating upgrade... Done The following packages have been kept back: guile-2.2-libs libobjc4 The following packages will be upgraded: chromium chromium-common chromium-sandbox firefox-esr gir1.2-javascriptcoregtk-4.0 gir1.2-webkit2-4.0 lib32z1 libjavascriptcoregtk-4.0-18 libwebkit2gtk-4.0-37 zlib1g zlib1g-dev 11 upgraded, 0 newly installed, 0 to remove and 2 not upgraded. Need to get 145 MB of archives. After this operation, 11.4 MB of additional disk space will be used. [..] Processing triggers for desktop-file-utils (0.26-1) ...
2022-03-27: sdb5 - reboot, Debian 11.3 is in.
tingo@z30b:~$ cat /etc/debian_version
11.3
kernel
tingo@z30b:~$ uname -a Linux z30b 5.10.0-13-amd64 #1 SMP Debian 5.10.106-1 (2022-03-17) x86_64 GNU/Linux
all for now.
2022-03-27: sdb5 - apt - update, then upgrade
tingo@z30b:~$ sudo apt upgrade Reading package lists... Done Building dependency tree... Done Reading state information... Done Calculating upgrade... Done The following packages were automatically installed and are no longer required: linux-image-4.19.0-17-amd64 linux-image-5.10.0-8-amd64 Use 'sudo apt autoremove' to remove them. The following NEW packages will be installed: linux-image-5.10.0-13-amd64 The following packages have been kept back: guile-2.2-libs libobjc4 The following packages will be upgraded: base-files bind9-dnsutils bind9-host bind9-libs bsdextrautils bsdutils chromium chromium-common chromium-sandbox cups-browsed cups-filters cups-filters-core-drivers dirmngr dnsutils eject espeak-ng-data fdisk firefox-esr ghostscript gir1.2-gtk-3.0 gir1.2-javascriptcoregtk-4.0 gir1.2-polkit-1.0 gir1.2-webkit2-4.0 gnupg gnupg-agent gnupg-l10n gnupg-utils gpg gpg-agent gpg-wks-client gpg-wks-server gpgconf gpgsm gpgv gtk-update-icon-cache libarchive13 libblkid1 libc-bin libc-dev-bin libc-devtools libc-l10n libc6 libc6-dev libc6-i386 libcryptsetup12 libcupsfilters1 libespeak-ng1 libexpat1 libexpat1-dev libfdisk1 libflac8 libfontembed1 libgs9 libgs9-common libgtk-3-0 libgtk-3-bin libgtk-3-common libjavascriptcoregtk-4.0-18 liblog4j1.2-java libmariadb3 libmount1 libnss-systemd libnss3 libpam-systemd libpolkit-agent-1-0 libpolkit-gobject-1-0 libsasl2-2 libsasl2-modules libsasl2-modules-db libsmartcols1 libsmbclient libssl1.1 libsystemd0 libtiff-tools libtiff5 libudev1 liburiparser1 libuuid1 libwbclient0 libwebkit2gtk-4.0-37 libxml2 linux-image-amd64 linux-libc-dev locales mariadb-common mount openjdk-11-jre openjdk-11-jre-headless openssl policykit-1 python-pip-whl python3-libxml2 python3-lxml python3-pil python3-pip samba-libs systemd systemd-sysv sysvinit-utils task-desktop task-english task-laptop task-ssh-server task-xfce-desktop tasksel tasksel-data tzdata udev usb.ids util-linux util-linux-locales xserver-xorg-video-intel xterm 113 upgraded, 1 newly installed, 0 to remove and 2 not upgraded. Need to get 306 MB of archives. After this operation, 303 MB of additional disk space will be used. [..] Setting up firefox-esr (91.7.0esr-1~deb11u1) ... Setting up gir1.2-webkit2-4.0:amd64 (2.34.6-1~deb11u1) ... Processing triggers for libc-bin (2.31-13+deb11u3) ...
apt autoremove
tingo@z30b:~$ sudo apt autoremove Reading package lists... Done Building dependency tree... Done Reading state information... Done The following packages will be REMOVED: linux-image-4.19.0-17-amd64 linux-image-5.10.0-8-amd64 linux-image-5.10.0-9-amd64 0 upgraded, 0 newly installed, 3 to remove and 2 not upgraded. After this operation, 873 MB disk space will be freed. [..] dding boot menu entry for EFI firmware configuration done
apt autoclean
tingo@z30b:~$ sudo apt autoclean Reading package lists... Done Building dependency tree... Done Reading state information... Done
ok