ND-100/CX Compact
model: Compact model 12
system number: 3392-1669
PSU: Philips PE1049
cpu: ND-100
memory: 2 Mbyte
floppy drive: 1.2 Mbyte 5.25 inch
tape drive: Tandberg TDC 3309 (TDC 3300 Series), ND 150-001442
hard drive: Micropolis 1325, ST506, 69 / 86 Mbyte
card crate with 12 positions:
- 3033 - PCB 3033 ND100 CPU, Print: S, Eco: V
- 3104 - PCB 3104 ND100 Mem. Man. II, Print: G, Eco: N
- (empty)
- (empty)
- 3041 - PCB 3041 ST506 Disk Contr. Print: E, Eco: K
- 3112 - PCB 3112 8" + 5 1/4" fl. + str., Print: B, Eco: J
- 3009 - PCB 3009C Local I/O Bus, B-interface address 151X
- (empty)
- (empty)
- (empty)
- (empty)
- 3042 - PCB 3042 ND100 2 Mby RAM, Print: B, Eco: C
back to Norsk Data, vintage computers page.
System history
According to the previous owner (pontus): "I got it from a university which ran a big ND-500 to control a simulator for of a small Nuclear Reactor. The simulator was quite neat, complete with control room and everything. The software on the ND-500 had been ported to a GNU/Linux system. So the ND-500 was donated to a friend of mine and later made it's way to another collector in Sweden. The ND-100 was sitting next to the 500 and according to the donor had never been used for as long as he could remember. However, I suspect it is somehow related."
That is all I know about the history of this machine so far.
Documentation: see my ND documentation list,
Hints: the console is always current loop, not V.24. The console prefers 9600 bps, 7E1.
Links
Bitsavers: Micropolis 1325 datasheet (PDF), DTX300 - MFM Hard Drive emulator, Micropolis 1325 repairs,
Operating system testing: SINTRAN III,
History
2023-04-17: I pulled out the cards from the card crate to photograph them, I also dumped the 2764 (AM2764) EPROM on the 3112 card.
2016-07-11: floppy drive. I unscrewed the media bay, and took out the floppy drive. It is labeled ND 149-116 on the right side. On the left side is the manufacturer label. Toshiba FDD 5801A0K 01 Rev. A. Serial no: A6412496.
2013-10-27: recently I got a few more 5.25 inch floppies. One of the was in ND format. Although it was labeled "URD" something on the (paper) label, it turns out it had something else on it (image: s12_19851220.image). Contents:
tingo@kg-core1$ ndfs -tl s12_19851220.image Directory name : s12 Object file index pointer : 508 SI: 0x1 (indexed) User file index pointer : 510 SI: 0x1 (indexed) Bit file pointer : 306 SI: 0x0 (contiguous) No. of unreserved pages : 1 Files: 0 0: I 34 pages 270336 bytes 1985-12-20 07:50:45 (system)perform-g00:prog 0 1: I 3 pages 2987 bytes 1985-12-20 07:50:49 (system)perform-lib-g00:mcro 0 2: I 2 pages 1932 bytes 1985-12-20 07:50:50 (system)perf-500-lib-g00:mcro 0 3: I 47 pages 95232 bytes 1986-11-11 09:43:23 (system)ue-ermsg-en-b02:old 0 4: I 42 pages 84480 bytes 1985-12-20 07:54:57 (system)ue-ermsg-eng-a03:err 0 5: I 25 pages 49664 bytes 1985-12-20 07:55:01 (system)ue-ermsg-nor-a00:err 0 6: I 52 pages 106240 bytes 1985-12-20 07:55:05 (system)ue-ermsg-en-b03:err 0 7: I 47 pages 96256 bytes 1985-12-20 07:55:10 (system)ue-ermsg-no-b02:err 0 8: I 21 pages 137216 bytes 1985-12-20 07:53:38 (system)file-man-pri-b00:prog 0 9: I 115 pages 251904 bytes 1985-12-20 07:54:29 (system)file-man-no-b00:prog 0 10: I 1 page 1527 bytes 1985-12-20 07:54:42 (system)ue-load-no:mode Directory size: 611 pages Bit file size : 1 page
all for now.
2013-02-15: I added links to the floppy images, see below. All images are straight dd images off the floppies which I have compressed with gzip.
2013-02-14: this evening I imaged the 5.25 inch floppies (by using my floppy machine) I got the other day. Contents:
ND-10561A PC-LINK (image) tingo@kg-t2$ ndfs -tl pc-link.image Directory name : nd-10561a Object file index pointer : 508 SI: 0x1 (indexed) User file index pointer : 510 SI: 0x1 (indexed) Bit file pointer : 306 SI: 0x0 (contiguous) No. of unreserved pages : 1 Files: 0 0: I 11 pages 22528 bytes 1984-02-08 20:08:34 (floppy-user)pc-link:prog 0 1: I 38 pages 76288 bytes 1984-02-08 20:09:31 (floppy-user)vtm-compound-a-c:prog 0 2: I 44 pages 90112 bytes 1984-02-08 20:10:42 (floppy-user)vtm-compound-d-c:prog 0 3: I 2 pages 1611 bytes 1984-02-08 20:12:20 (floppy-user)vtm-all-types:vtm 0 4: I 1 page 1092 bytes 1984-02-08 20:13:14 (floppy-user)ddb079-a-a:vtm Directory size: 611 pages Bit file size : 1 page
210455G02-XX-01D VTM Terminal tables (Standard) release date 870626 870618 (the floppy label is crossed out) (image)
tingo@kg-t2$ ndfs -tl ./test.image Directory name : 210455g02-xx-01d Object file index pointer : 508 SI: 0x1 (indexed) User file index pointer : 510 SI: 0x1 (indexed) Bit file pointer : 306 SI: 0x0 (contiguous) No. of unreserved pages : 1 Files: 0 0: C 3 pages 602 bytes 1987-04-09 09:56:43 (floppy-user)ddb002-7s-g02:vtm 0 1: C 3 pages 632 bytes 1987-03-16 14:55:39 (floppy-user)ddb003-7s-g02:vtm 0 2: I 1 page 602 bytes 1987-03-16 14:54:23 (floppy-user)ddb011-7s-g02:vtm 0 3: I 1 page 887 bytes 1987-03-16 12:53:55 (floppy-user)ddb036-7s-g02:vtm 0 4: I 1 page 1093 bytes 1987-04-15 09:55:04 (floppy-user)ddb057-7s-g02:vtm 0 5: C 3 pages 977 bytes 1986-11-28 13:00:01 (floppy-user)ddb052-7s-g02:vtm 0 6: C 2 pages 2100 bytes 1987-05-14 12:05:03 (floppy-user)ddb053-7s-g02:vtm 0 7: I 1 page 1088 bytes 1987-02-09 12:43:40 (floppy-user)ddb079-7s-g02:vtm 0 8: I 2 pages 2166 bytes 1987-05-13 09:13:39 (floppy-user)ddb080-7s-g02:vtm 0 9: I 2 pages 2118 bytes 1987-05-14 12:04:03 (floppy-user)ddb083-7s-g02:vtm 0 10: I 2 pages 3674 bytes 1987-04-15 10:04:25 (floppy-user)ddb090-7b-g02:vtm 0 11: I 2 pages 2190 bytes 1987-05-07 12:32:33 (floppy-user)ddb092-7s-g02:vtm 0 12: C 3 pages 1568 bytes 1987-03-13 10:36:15 (floppy-user)ddb099-7s-g02:vtm 0 13: I 2 pages 2188 bytes 1987-05-11 10:24:02 (floppy-user)ddb090-7s-g02:vtm 0 14: I 2 pages 2138 bytes 1987-04-15 10:52:03 (floppy-user)ddb093-7s-g02:vtm 0 15: I 2 pages 2190 bytes 1987-05-07 12:28:48 (floppy-user)ddb091-7s-g02:vtm 0 16: I 2 pages 3718 bytes 1987-05-07 14:29:29 (floppy-user)ddb093-7b-g02:vtm 0 17: C 3 pages 3678 bytes 1987-04-15 10:57:00 (floppy-user)ddb100-7b-g02:vtm 0 18: I 2 pages 2128 bytes 1987-04-15 10:57:59 (floppy-user)ddb100-8s-g02:vtm 0 19: I 2 pages 3654 bytes 1987-04-15 10:59:17 (floppy-user)ddb100-8b-g02:vtm 0 20: C 3 pages 2042 bytes 1987-04-15 10:56:00 (floppy-user)ddb100-7s-g02:vtm 0 21: I 1 page 2014 bytes 1987-04-15 11:03:32 (floppy-user)ddb103-8s-g02:vtm 0 22: C 3 pages 3724 bytes 1987-04-15 12:14:00 (floppy-user)ddb103-7b-g02:vtm 0 23: C 3 pages 2138 bytes 1987-04-15 12:16:08 (floppy-user)ddb103-7s-g02:vtm 0 24: I 2 pages 3530 bytes 1987-04-15 11:00:50 (floppy-user)ddb103-8b-g02:vtm 0 25: I 1 page 1457 bytes 1987-02-03 13:17:26 (floppy-user)ddb105-7s-g02:vtm 0 26: C 3 pages 1968 bytes 1987-05-06 11:49:32 (floppy-user)ddb113-7s-g02:vtm 0 27: I 3 pages 3724 bytes 1987-05-06 11:45:25 (floppy-user)ddb113-7b-g02:vtm 0 28: I 3 pages 3750 bytes 1987-05-06 11:51:27 (floppy-user)ddb110-7b-g02:vtm 0 29: I 3 pages 2196 bytes 1987-05-06 11:53:08 (floppy-user)ddb110-7s-g02:vtm 0 30: I 104 pages 292864 bytes 1987-05-07 09:28:33 (floppy-user)vtm-compound-g02:prog 0 31: I 2 pages 3545 bytes 1987-05-04 15:01:56 (floppy-user)vtm-all-types:vtm 0 32: I 17 pages 266240 bytes 1987-05-20 10:30:28 (floppy-user)inst-tables-g02:prog 0 33: I 2 pages 3546 bytes 1987-04-23 12:15:22 (floppy-user)ddb999-g02:vtm 0 34: I 34 pages 68696 bytes 1987-05-14 12:14:34 (floppy-user)ddbtables-g02:vtm 0 35: I 42 pages 85884 bytes 1987-05-14 12:14:20 (floppy-user)vtm-arrays-g02:nrf 0 36: I 34 pages 69530 bytes 1987-05-14 12:14:11 (floppy-user)vtm-2b-array-g02:brf 0 37: I 34 pages 69528 bytes 1987-05-14 12:14:03 (floppy-user)vtm-1b-array-g02:brf Directory size: 611 pages Bit file size : 1 page
210177K01-XX-01D COBOL-85 for ND-500/5000 release date 890227 8902 (image)
tingo@kg-t2$ ndfs -tl cobol-85.image Directory name : 210177k01-xx-01d Object file index pointer : 508 SI: 0x1 (indexed) User file index pointer : 510 SI: 0x1 (indexed) Bit file pointer : 306 SI: 0x0 (contiguous) No. of unreserved pages : 1 Files: 0 0: I 8 pages 22528 bytes 1989-02-17 11:08:57 (floppy-user)description-file:desc 0 1: I 9 pages 17089 bytes 1989-02-17 11:06:23 (floppy-user)cobol-85-k01:link 0 2: I 64 pages 129253 bytes 1989-02-17 11:06:24 (floppy-user)cobol-85-k01:dseg 0 3: I 130 pages 265213 bytes 1989-02-17 11:06:26 (floppy-user)cobol-85-k01:pseg 0 4: I 142 pages 289308 bytes 1989-02-16 15:33:30 (floppy-user)cobol-85-lib-k01:nrf 0 5: I 1 page 378 bytes 1989-02-07 15:36:20 (floppy-user)cobol-85-lib-k01:new 0 6: I 1 page 880 bytes 1989-02-07 15:35:43 (floppy-user)cobol-85-lib-k01:old 0 7: I 1 page 131 bytes 1987-07-12 23:49:56 (floppy-user)is-multi-k00:nrf 0 8: I 1 page 258 bytes 1989-01-19 10:20:14 (floppy-user)is-multi-k00:new 0 9: I 1 page 358 bytes 1989-01-19 10:22:21 (floppy-user)is-multi-k00:old 0 10: I 58 pages 118784 bytes 1987-09-02 16:15:08 (floppy-user)isam-inter-k01:prog 0 11: I 83 pages 211456 bytes 1989-02-13 14:41:12 (floppy-user)isam-service-k02:prog Directory size: 611 pages Bit file size : 1 page
105226M07-NO-02D NOTIS-WP for ND-500 release date 870709 870507 (image)
tingo@kg-t2$ ndfs -tl notis-wp_nd500.image Directory name : 10526m07-no-2d Object file index pointer : 508 SI: 0x1 (indexed) User file index pointer : 510 SI: 0x1 (indexed) Bit file pointer : 306 SI: 0x0 (contiguous) No. of unreserved pages : 1 Files: 0 0: I 8 pages 22528 bytes 1987-04-15 07:35:02 (floppy-user)description-file:desc 0 1: I 0 pages 0 bytes 1987-04-15 07:27:59 (floppy-user)scratch-seg-01:link 0 2: I 1 page 1029 bytes 1987-04-15 07:28:01 (floppy-user)scratch-seg-01:dseg 0 3: I 1 page 5 bytes 1987-04-15 07:28:03 (floppy-user)scratch-seg-01:pseg 0 4: I 37 pages 74337 bytes 1987-04-15 07:28:21 (floppy-user)notis-wp-no-m07:link 0 5: I 84 pages 191563 bytes 1987-04-15 07:28:23 (floppy-user)notis-wp-no-m07:dseg 0 6: I 279 pages 570263 bytes 1987-04-15 07:28:25 (floppy-user)notis-wp-no-m07:pseg Directory size: 611 pages Bit file size : 1 page
210523E00-XX-01D Test Programs for ND-100 release date 870715 870108 (image)
tingo@kg-t2$ ndfs -tl test_nd100.image Directory name : 210523e00-xx-01d Object file index pointer : 508 SI: 0x1 (indexed) User file index pointer : 510 SI: 0x1 (indexed) Bit file pointer : 306 SI: 0x0 (contiguous) No. of unreserved pages : 1 Files: 0 0: I 28 pages 56182 bytes 1986-10-30 13:42:50 (floppy-user)tpe-mon-100-a02:bpun 0 1: I 11 pages 21504 bytes 1986-10-15 20:07:00 (floppy-user)cache-100-a00:test 0 2: I 22 pages 43520 bytes 1986-10-16 10:25:35 (floppy-user)cache-110-a00:test 0 3: I 9 pages 17920 bytes 1986-10-31 10:50:16 (floppy-user)colour-term-a00:test 0 4: I 18 pages 36864 bytes 1986-12-11 17:27:36 (floppy-user)configuratio-d00:test 0 5: I 35 pages 71680 bytes 1986-11-11 10:50:41 (floppy-user)disc-tema-i11:test 0 6: I 23 pages 46592 bytes 1986-11-04 14:25:00 (floppy-user)floppy-strea-c00:test 0 7: I 29 pages 58368 bytes 1986-10-16 10:37:37 (floppy-user)graphic-term-b00:test 0 8: I 2 pages 3082 bytes 1986-04-17 14:47:07 (floppy-user)graphic-term-b00:font 0 9: I 10 pages 19456 bytes 1986-10-31 12:02:28 (floppy-user)hdlc-megalin-d00:test 0 10: I 17 pages 33280 bytes 1986-10-31 12:17:14 (floppy-user)instruction-c00:test 0 11: I 5 pages 10240 bytes 1986-10-31 12:21:29 (floppy-user)lp-test-e00:test 0 12: I 7 pages 13824 bytes 1986-10-31 12:24:28 (floppy-user)magtape-b00:test 0 13: I 13 pages 25088 bytes 1986-10-31 12:30:42 (floppy-user)memory-d00:test 0 14: I 17 pages 33792 bytes 1986-10-16 11:27:59 (floppy-user)paging-c00:test 0 15: I 37 pages 75776 bytes 1986-12-04 12:10:42 (floppy-user)pioc-ether-a00:test 0 16: I 4 pages 7680 bytes 1986-10-15 19:29:51 (floppy-user)power-fail-a00:test 0 17: I 37 pages 75264 bytes 1986-10-16 10:14:44 (floppy-user)printers-a00:test 0 18: I 6 pages 12288 bytes 1986-10-31 12:35:18 (floppy-user)sync-modem-b00:test 0 19: I 13 pages 25600 bytes 1986-10-31 12:46:38 (floppy-user)terminal-asy-f00:test 0 20: I 22 pages 44032 bytes 1986-10-31 12:54:14 (floppy-user)univers-dma-c00:test Directory size: 611 pages Bit file size : 1 page
dir: KOM, user: FL-US, Kermit (handwritten label) (image)
tingo@kg-t2$ ndfs -tl kermit.image Directory name : kom Object file index pointer : 508 SI: 0x1 (indexed) User file index pointer : 510 SI: 0x1 (indexed) Bit file pointer : 306 SI: 0x0 (contiguous) No. of unreserved pages : 1 Files: 0 0: I 23 pages 45568 bytes 1989-06-23 15:32:19 (floppy-user)kermit:prog 0 1: I 1 page 420 bytes 1989-06-23 15:32:34 (floppy-user)kermit:hlib 0 2: I 4 pages 6915 bytes 1989-06-23 15:32:38 (floppy-user)kermit:help Directory size: 611 pages
2013-02-11: this afternoon I visited a kind man who gave me a sealed box of unused floppies (3M - DS, HD - 5.25 inch, box of 10), and a few 5.25 inch floppies with ND software on. The ND floppies are:
ND-10561A PC-LINK 210455G02-XX-01D VTM Terminal tables (Standard) release date 870626 870618 (the floppy label is crossed out) 210177K01-XX-01D COBOL-85 for ND-500/5000 release date 890227 8902 105226M07-NO-02D NOTIS-WP for ND-500 release date 870709 870507 210523E00-XX-01D Test Programs for ND-100 release date 870715 870108 dir: KOM, user: FL-US, Kermit (handwritten label)
2011-11-19: tape drive - I have some DC6150 tapes. I wonder if they would work in the TDC3309 tape drive. And if I could read them in a Wangtek 5150ES drive afterwards (under FreeBSD or Linux),
2011-11-10: system-test - ok, put the hard drive back into the machine again, connected it up, and powered on the machine. Nothing happened, so I pressed the "START" button. and now the RUNNING light turned on. Yes! After a while I got this on the console (transcribed):
BATCH NUMBER = 1 13.14.12 15 SEPTEMBER 1987 SINTRAN III - VSX / 500 K ******** VÄLKOMMEN TILL DEMO SIMULATORN ********
Yes! It works!.More on the sintran page.
2011-11-10: hard drive - trying to unstick the drive heads from the parking "bumper". This is based on a discussion on the cctech mailinglist. The steps should be as follows:
0) prepare: have necessary tools available: screwdriver, scissors, flashlight. Use some post-it paper as "isolator" for the bumper. Connect a power supply to the drive 1) unscrew the top cover (ten screws in total,six are partly covered by the label ) 2) remove the top cover 3) locate head s and bumper 4) move the head assembly a bit, so it unsticks from the bumper 5) apply power 6) cut a piece of post-it to the right size 7) isolate the "goo" on the bumper with the paper 8) replace cover, fasten screws
Ok, I opened up the drive. It took a while before I figured out where the bumpers are; they are actually inside the motor of the head assembly. Look for the two slits on top of it; on both sides there are rubber "bumpers". Using my fingers to move the head assembly back and forth, I could hardly feel any resistance at all. But as soon as I placed a small paper strip between the head and the outside bumper, the head moved when the hard drive was powered (and before I did that, the head wouldn't move at all when the hard drive was powered up. Ran the hard drive for 4 minutes as a test.
2011-10-23: hard drive - first try: I put the hard drive in the refrigerator for 30 mins, the took it out, connected it to the machine again, and tried to start the machine five or six times. It didn't work, the hard drive still powers down after running for about a minute or two. Next try: the refrigerator for one hour. OK, after one hour, I took out the drive, connected it to the machine again, and tried to start the machine. No change in drive behavior - it still turns itself off after a short time. I tried more than ten starts of the machine - didn't help.
2011-10-21: hard drive - to prepare for hard drive testing, I rigged a ATX PSU (using ATX 2.2 pinout) so I could power it up manually. Tested with another hard drive I had laying about. Works flawlessly. I connected the Micropolis 1325 and started the PSU. The drive started spinning. After a while, it stopped the motor. Further testing shows that it always does this. Update: I found this thread. Doesn't sound good. More threads: here,
2011-10-10: hard drive - I disconnected the cables from the hard drive, and unscrewed the two screws that holds it, then slid out the "cage" that it sits in (good engineering). serial number: 6082021623A. part number: 900525-01-5L.The drive draws 32W, and runs on +12 VDC and +5 VDC. On top of the drive the "Micropolis media defect table" is printed. Transcribed below:
ST506, 85MB HDA # 337494 Hd Cyl BFIND Hd Cyl BFIND Hd Cyl BFIND Hd Cyl BFIND Hd Cyl BFIND 0 290 1588 . 0 404 8053. 2 468 9670 4 3 6135 4 38 1878. 4 740 2591 . 7 396 9868 CRC 0=4a23, 1=0000, 2=2dc3, 3=0000, 4=c15c, 5=0000, 6=0000, 7=30bc
That's all. I unscrewed the drive from its cage (four screws), took it out and examined it. I loosened the two screws that hold the upper circuit board (the other end is hinged) and lifted it up. This drive has part of the engine (flywheel?) outside, which made it easy to test if the drive spins freely - it does. I put the drive back together again, mounted in its cage, mounted the cage in the machine, connected all acbles, and fired the machine up again. I noticed one thing: the little red light on the drive itself is on, and seems to be like that the whole time. I don't know what that means.
I also tried a 20500& from the console, but it didn't do anything.
I measured the voltage at the drive power connector (with the drive attached); +5V was spot on, while +12V was 11.61V (probably ok).
2011-10-10: floppy drive, tape drive - I disconnected power and data connectors for the floppy drive, to check if they were corroded, but they looked fine. Still, floppy loading doesn't work. I also checked the connectors for the tape drive, and tape controller card; no corrosion there either. I have no tapes to test with, so it doesn't really matter.
2011-09-28: 3112 floppy + streamer controller: I took off the lid of the card cage so I could see the display (3 digits) on the controller. After a MCL, the display shows "000" - which means "selftest passed - ok". If I try to load (1560&) from a floppy with no boostrap (a MS-DOS formatted floppy, for example), the console shows load-error: 50, but the display shows "53". If I try to load from a ND-format floppy (with bootstrap on it) the display shows "E3". The highest error number in the manual is 77. Interesting.
2011-09-28: trying to boot from a floppy made from the image image15 on a FreeBSD machine. It behaves the same way as the first image: I enter 1560& on the console, the machine reads from the floppy, the "RUNNING" indicator turns on, and then nothing more.
2011-09-28: from the manual ND-11.021.1 EN, page 3: "For "stand-alone" use, a new version of FLO-MON (FLOppy-MONitor-2010F or newer) must be dumped on the diskette."
2011-09-28: ALD - the command I12/ from OPCOM tells me that the ALD is set to 20500, which is ST-506 "Winchester" disk controller 1, unit 0 (according to the System Supervisor Manual. SINTRAN disk name: DISC-74MB-1, unit 0.
#I12/020500
That's all.
2011-09-25: trying to boot from a floppy made with dd from the image Testdisk.raw on a FreeBSD machine: I enter 1560& on the console, the machine reads from the floppy, the "RUNNING" indicator turns on, and then nothing more. I wonder if I need to swap bytes while writing the image?
An image created with dd's conv=swab option ends up reading and reading endlessly from the floppy, without going out of OPCOM mode until it times out (seven minutes), and still the machine reads and reads from the floppy. I had to enter OPCOM mode again and press MCL to stop it.
2011-09-23: I set the console at 9600 bps, 7E1. First power up - the machine powers up, the panel starts, and the buttons STOP and START are lit. Pressing either of them gives no evidence that they are working. By holding the rightmost button down, and pressing the STOP button, the panel goes into advanced (OPCOM) mode. Pressing the MCL button gives a "#" on the console. The same does writing "MACL" + ENTER on the console (all caps only!). Pressing the LOAD button does nothing. If I write "&" on the console, nothing happens. If I write 1560& on the console, I get an error message after a while (LOAD-ERROR: 20), which is good since there is no floppy in the floppy drive and the door is open.
2011-09-23: 3041 ST506 disk controller switch: device number selection: 0 - the first 5.25 inch, 8 inch or 10 MB controller.
2011-09-23: 3033 CPU card switches: ALD: 13. Console: 7 (9600 bps)
2011-09-23: cards in the card cage:
- PCB 3033 ND100 CPU, Print: S, Eco: V
- PCB 3104 ND100 Mem. Man. II, Print: G, Eco: N
- (empty)
- (empty)
- PCB 3041 ST506 Disk Contr. Print: E, Eco: K
- PCB 3112 8" + 5 1/4" fl. + str., Print: B, Eco: J
- PCB 3009C Local I/O Bus, B-interface address 151X
- (empty)
- (empty)
- (empty)
- (empty)
- PCB 3042 ND100 2 Mby RAM, Print: B, Eco: C
2011-09-23: The Tandberg TDV 2200/9 terminal is working.
2011-09-23: Pontus and helpers delivered the machine to me in exchange for covering part of the fuel cost (NOK 500.- ). A very reasonable price, I think. The total delivery was: 1 x ND-100/CX Compact machine, with power cable, serial cable (NOT current loop, don't know yet if it is rs-232 / V.24). The top of the front is labeled "DEMO SIM" with red Dymo tape. The key switch on the panel had broken plastic clips, and was delivered separately.
1 x unknown cable, which came with the machine 1 x display terminal Tandberg TDV 2200/9, serial no: 285727 (TDV 2200/9, Rev. Lev. 11 / 531301) with keyboard, but no power cable 1 x binder, containing a cheat card "ND-100 Instant instruction codes" a cheat card "ND100 Operator's Communication Instruction Survey" a document "Test Progran Description for ND-100 / ND-110" two pages containing a documentation index for "C-Dokumentation för F3-528" a Tandberg TDV 2200 Hardware Manual (October 1980, revision no. 0)