SGI Fuel R14000 - 'hinv'
Hardware info on main page.
This is the 'hinv' page, lots of info about the system:
hinv -vm
# hinv -vm Location: /hw/module/001c01/node IP34 Board: barcode MET945 part 030-1707-003 rev -G Location: /hw/module/001c01/Ibrick/xtalk/13 ASTODYB Board: barcode MMD622 part 030-1725-001 rev -G Location: /hw/module/001c01/Ibrick/xtalk/14 IP34 Board: barcode MET945 part 030-1707-003 rev -G Location: /hw/module/001c01/Ibrick/xtalk/15 IP34 Board: barcode MET945 part 030-1707-003 rev -G 1 500 MHZ IP35 Processor CPU: MIPS R14000 Processor Chip Revision: 2.3 FPU: MIPS R14010 Floating Point Chip Revision: 2.3 CPU 0 at Module 001c01/Slot 0/Slice A: 500 Mhz MIPS R14000 Processor Chip (enabled) Processor revision: 2.3. Scache: Size 2 MB Speed 250 Mhz Tap 0xa Main memory size: 1536 Mbytes Instruction cache size: 32 Kbytes Data cache size: 32 Kbytes Secondary unified instruction/data cache size: 2 Mbytes Memory at Module 001c01/Slot 0: 1536 MB (enabled) Bank 0 contains 512 MB (Standard) DIMMS (enabled) Bank 1 contains 512 MB (Standard) DIMMS (enabled) Bank 2 contains 256 MB (Standard) DIMMS (enabled) Bank 3 contains 256 MB (Standard) DIMMS (enabled) Integral SCSI controller 0: Version QL12160, single ended Disk drive: unit 1 on SCSI controller 0 (unit 1) Integral SCSI controller 1: Version QL12160, single ended CDROM: unit 6 on SCSI controller 1 IOC3/IOC4 serial port: tty1 IOC3/IOC4 serial port: tty2 IOC3 parallel port: plp1 Graphics board: V10 Integral Fast Ethernet: ef0, version 1, module 001c01, pci 4 PCI Adapter ID (vendor 0x1077, device 0x1216) PCI slot 1 PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 4 PCI Adapter ID (vendor 0x11c1, device 0x5802) PCI slot 5 HUB in Module 001c01/Slot 0: Revision 2 Speed 200.00 Mhz (enabled) IP35prom in Module 001c01/Slot n0: Revision 6.170 USB controller: type OHCI
gfxinfo -vv
# /usr/gfx/gfxinfo -vv Graphics board 0 is "ODYSSEY" graphics. Managed (":0.0") 1280x1024 BUZZ version B.1 PB&J version 1 32MB memory Banks: 2, CAS latency: 3 Monitor 0 type: CPQ 5013 Input Sync: Voltage - Video Level; Source - Internal; Genlocked - False Channel 0: Origin = (0,0) Video Output: 1280 pixels, 1024 lines, 60.00Hz (1280x1024_60) Video Format Flags: (none) Sync Disabled Using Gamma Map 0 Monitor Type: CPQ-5013 Gain (all color components) - 0.000000 ; range [1,10]
uname -aR
# uname -aR IRIX64 IRIS 6.5 6.5.22f 10070055 IP35
scsicontrol -i /dev/scsi/*
# scsicontrol -i /dev/scsi/* /dev/scsi/sc0d1l0: Disk IBM DPSS-318350N S9RA ANSI vers 3, ISO ver: 0, ECMA ver: 0; supports: 16bit synch linkedcmds cmdqueing Device is ready /dev/scsi/sc1d6l0: CD-ROM TOSHIBA DVD-ROM SD-M14011F09 ANSI vers 2, ISO ver: 0, ECMA ver: 0; supports: synch linkedcmds Device is not ready
diskpatch -v
# /sbin/diskpatch -v sc0d1l0: Disk IBM DPSS-318350N S9RA Serial: ZE1B6135
l1cmd serial all
# l1cmd serial all Data Location Value ------------------------------ ------------ -------- Local System Serial Number EEPROM 08:00:69:10:42:1E Local Brick Serial Number EEPROM MET945 Reference Brick Serial Number NVRAM MET945 EEPROM Product Name Serial Part Number Rev T/W ---------- -------------- ------------- -------------------- --- ------ NODE IP34 MET945 030_1707_003 G 00 MAC MAC ADDRESS NA NA NA NA PIMM IP34PIMM MMD136 030_1708_002 H 00 XIO ASTODYB MMD622 030_1725_001 G 00 EEPROM JEDEC-SPD Info Part Number Rev Speed SGI ---------- ------------------------ ------------------ ---- ------ -------- DIMM 0 CE000000000000000C48AD00 M3 47L6423DT3-CA0 3D 10.0 N/A DIMM 2 CE000000000000000CEDA701 M3 46L3313DT2-CA0 2D 10.0 N/A DIMM 1 CE000000000000000C5FAD00 M3 47L6423DT3-CA0 3D 10.0 N/A DIMM 3 CE000000000000000CEEA701 M3 46L3313DT2-CA0 2D 10.0 N/A
l1cmd flash status
# l1cmd flash status Flash image A currently booted Image Status Revision Built ----- ------------- ---------- ----- A default 1.24.8 09/15/2003 17:08:18 B valid 1.16.2 10/16/2002 14:37:15
l1cmd env
# l1cmd env Environmental monitoring is enabled and running. Description State Warning Limits Fault Limits Current -------------- ---------- ----------------- ----------------- ------- 12V Enabled 10% 10.80/ 13.20 20% 9.60/ 14.40 12.12 12V IO Enabled 10% 10.80/ 13.20 20% 9.60/ 14.40 12.19 5V Enabled 10% 4.50/ 5.50 20% 4.00/ 6.00 5.10 3.3V Enabled 10% 2.97/ 3.63 20% 2.64/ 3.96 3.32 2.5V Enabled 10% 2.25/ 2.75 20% 2.00/ 3.00 2.44 1.5V Enabled 10% 1.35/ 1.65 20% 1.20/ 1.80 1.47 5V aux Enabled 10% 4.50/ 5.50 20% 4.00/ 6.00 5.07 3.3V aux Enabled 10% 2.97/ 3.63 20% 2.64/ 3.96 3.30 PIMM0 12V bias Enabled 10% 10.80/ 13.20 20% 9.60/ 14.40 12.19 Fuel SRAM Enabled 10% 2.25/ 2.75 20% 2.00/ 3.00 2.52 Fuel CPU Enabled 10% 1.44/ 1.76 20% 1.28/ 1.92 1.61 PIMM0 1.5V Enabled 10% 1.35/ 1.65 20% 1.20/ 1.80 1.49 PIMM0 3.3V aux Enabled 10% 2.97/ 3.63 20% 2.64/ 3.96 3.30 PIMM0 5V aux Enabled 10% 4.50/ 5.50 20% 4.00/ 6.00 5.10 XIO 12V bias Enabled 10% 10.80/ 13.20 20% 9.60/ 14.40 12.06 XIO 5V Enabled 10% 4.50/ 5.50 20% 4.00/ 6.00 5.07 XIO 2.5V Enabled 10% 2.25/ 2.75 20% 2.00/ 3.00 2.47 XIO 3.3V aux Enabled 10% 2.97/ 3.63 20% 2.64/ 3.96 3.30 Description State Warning RPM Current RPM -------------- ---------- ----------- ----------- FAN 0 EXHAUST Enabled 920 1205 FAN 1 HD Enabled 1560 2280 FAN 2 PCI Enabled 1120 1562 FAN 3 XIO 1 Enabled 1600 2721 FAN 4 XIO 2 Enabled 1600 2518 FAN 5 PS Enabled 1600 3214 Advisory Critical Fault Current Description State Temp Temp Temp Temp -------------- ---------- --------- --------- --------- --------- NODE 0 Enabled 60C/140F 65C/149F 70C/158F 44C/111F NODE 1 Enabled 60C/140F 65C/149F 70C/158F 40C/104F NODE 2 Enabled 60C/140F 65C/149F 70C/158F 33C/ 91F PIMM Enabled 60C/140F 65C/149F 70C/158F 49C/120F ODYSSEY Enabled 60C/140F 65C/149F 70C/158F 44C/111F BEDROCK Enabled 70C/158F 75C/167F 80C/176F 49C/120F
That's all.