Copyright (c) 1992-2010 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.0-STABLE #2: Sun Jan 31 18:39:17 CET 2010 root@kg-f2.kg4.no:/usr/obj/usr/src/sys/GENERIC amd64 Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80fd6000. Preloaded elf obj module "/boot/kernel/zfs.ko" at 0xffffffff80fd61d0. Preloaded elf obj module "/boot/kernel/opensolaris.ko" at 0xffffffff80fd6878. Preloaded elf obj module "/boot/kernel/amdtemp.ko" at 0xffffffff80fd6ea8. Preloaded /boot/zfs/zpool.cache "/boot/zfs/zpool.cache" at 0xffffffff80fd7410. Preloaded elf obj module "/boot/kernel/siis.ko" at 0xffffffff80fd7470. Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 2819777884 Hz CPU: AMD Athlon(tm) II X2 240 Processor (2819.78-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0x100f62 Stepping = 2 Features=0x178bfbff Features2=0x802009 AMD Features=0xee500800 AMD Features2=0x37ff TSC: P-state invariant L1 2MB data TLB: 48 entries, fully associative L1 2MB instruction TLB: 16 entries, fully associative L1 4KB data TLB: 48 entries, fully associative L1 4KB instruction TLB: 32 entries, fully associative L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L2 2MB data TLB: 128 entries, 2-way associative L2 2MB instruction TLB: 0 entries, 2-way associative L2 4KB data TLB: 512 entries, 4-way associative L2 4KB instruction TLB: 512 entries, 4-way associative L2 unified cache: 1024 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative real memory = 4294967296 (4096 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages) 0x0000000001006000 - 0x00000000c72a5fff, 3324641280 bytes (811680 pages) 0x0000000100000000 - 0x0000000127feffff, 671023104 bytes (163824 pages) avail memory = 3973873664 (3789 MB) ACPI APIC Table: INTR: Adding local APIC 1 as a target FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 APIC: CPU 0 has ACPI ID 0 APIC: CPU 1 has ACPI ID 1 ULE: setup cpu 0 ULE: setup cpu 1 ACPI: RSDP 0xf7150 00014 (v0 GBT ) ACPI: RSDT 0xcfde3000 00038 (v1 GBT GBTUACPI 42302E31 GBTU 01010101) ACPI: FACP 0xcfde3040 00074 (v1 GBT GBTUACPI 42302E31 GBTU 01010101) ACPI: DSDT 0xcfde30c0 042A0 (v1 GBT GBTUACPI 00001000 MSFT 03000000) ACPI: FACS 0xcfde0000 00040 ACPI: SSDT 0xcfde7440 0095E (v1 PTLTD POWERNOW 00000001 LTP 00000001) ACPI: HPET 0xcfde7dc0 00038 (v1 GBT GBTUACPI 42302E31 GBTU 00000098) ACPI: MCFG 0xcfde7e00 0003C (v1 GBT GBTUACPI 42302E31 GBTU 01010101) ACPI: APIC 0xcfde7380 00084 (v1 GBT GBTUACPI 42302E31 GBTU 01010101) MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000 ioapic0: Changing APIC ID to 2 ioapic0: Routing external 8259A's -> intpin 0 MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level ioapic0: intpin 9 polarity: low lapic0: Routing NMI -> LINT1 lapic0: LINT1 trigger: edge lapic0: LINT1 polarity: high lapic1: Routing NMI -> LINT1 lapic1: LINT1 trigger: edge lapic1: LINT1 polarity: high MADT: Ignoring local NMI routed to ACPI CPU 2 MADT: Ignoring local NMI routed to ACPI CPU 3 ioapic0 irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400 wlan: <802.11 Link Layer> random: nfslock: pseudo-device kbd: new array size 4 kbd1 at kbdmux0 mem: io: null: hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 acpi0: on motherboard PCIe: Memory Mapped configuration base @ 0xe0000000 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48 acpi0: [MPSAFE] acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: wakeup code va 0xffffff800000e000 pa 0x4000 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.SATA.SACS -> bus 0 dev 17 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.BAR1 -> bus 0 dev 0 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.SMB0.HETT -> bus 0 dev 20 func 0 acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, cfce0000 (3) failed ACPI timer: 1/2 1/2 1/2 0/3 0/3 0/3 1/2 1/2 1/2 0/3 -> 6 Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 Validation 0 255 N 0 3 4 5 6 7 10 11 After Disable 0 255 N 0 3 4 5 6 7 10 11 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 Validation 0 255 N 0 3 4 5 6 7 10 11 After Disable 0 255 N 0 3 4 5 6 7 10 11 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 Validation 0 255 N 0 3 4 5 6 7 10 11 After Disable 0 255 N 0 3 4 5 6 7 10 11 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 Validation 0 255 N 0 3 4 5 6 7 10 11 After Disable 0 255 N 0 3 4 5 6 7 10 11 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 Validation 0 255 N 0 3 4 5 6 7 10 11 After Disable 0 255 N 0 3 4 5 6 7 10 11 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 Validation 0 255 N 0 3 4 5 6 7 10 11 After Disable 0 255 N 0 3 4 5 6 7 10 11 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 Validation 0 255 N 0 3 4 5 6 7 10 11 After Disable 0 255 N 0 3 4 5 6 7 10 11 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 Validation 0 255 N 0 3 4 5 6 7 10 11 After Disable 0 255 N 0 3 4 5 6 7 10 11 acpi_hpet0: iomem 0xfed00000-0xfed003ff on acpi0 acpi_hpet0: vend: 0x4353 rev: 0x1 num: 3 hz: 14318180 opts: legacy_route Timecounter "HPET" frequency 14318180 Hz quality 900 acpi_button0: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x1002, dev=0x7911, revid=0x00 domain=0, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2220, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1002, dev=0x7912, revid=0x00 domain=0, bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0230, cachelnsz=0 (dwords) lattimer=0x63 (2970 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) found-> vendor=0x1002, dev=0x7914, revid=0x00 domain=0, bus=0, slot=4, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=1 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 3 supports D0 D3 current D0 MSI supports 1 message found-> vendor=0x1002, dev=0x7916, revid=0x00 domain=0, bus=0, slot=6, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=1 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 3 supports D0 D3 current D0 MSI supports 1 message found-> vendor=0x1002, dev=0x4391, revid=0x00 domain=0, bus=0, slot=17, func=0 class=01-06-01, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0230, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0xff00, size 3, enabled map[14]: type I/O Port, range 32, base 0xfe00, size 2, enabled map[18]: type I/O Port, range 32, base 0xfd00, size 3, enabled map[1c]: type I/O Port, range 32, base 0xfc00, size 2, enabled map[20]: type I/O Port, range 32, base 0xfb00, size 4, enabled map[24]: type Memory, range 32, base 0xfe02f000, size 10, enabled pcib0: matched entry for 0.17.INTA pcib0: slot 17 INTA hardwired to IRQ 22 found-> vendor=0x1002, dev=0x4397, revid=0x00 domain=0, bus=0, slot=18, func=0 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0002, statreg=0x02a0, cachelnsz=1 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 map[10]: type Memory, range 32, base 0xfe02e000, size 12, enabled pcib0: matched entry for 0.18.INTA pcib0: slot 18 INTA hardwired to IRQ 16 unknown: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe02e000 ohci early: SMM active, request owner change found-> vendor=0x1002, dev=0x4398, revid=0x00 domain=0, bus=0, slot=18, func=1 class=0c-03-10, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02a0, cachelnsz=1 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 map[10]: type Memory, range 32, base 0xfe02d000, size 12, enabled pcib0: matched entry for 0.18.INTA pcib0: slot 18 INTA hardwired to IRQ 16 unknown: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe02d000 ohci early: SMM active, request owner change found-> vendor=0x1002, dev=0x4396, revid=0x00 domain=0, bus=0, slot=18, func=2 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0002, statreg=0x02b0, cachelnsz=1 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xfe02c000, size 8, enabled pcib0: matched entry for 0.18.INTB pcib0: slot 18 INTB hardwired to IRQ 17 unknown: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfe02c000 found-> vendor=0x1002, dev=0x4397, revid=0x00 domain=0, bus=0, slot=19, func=0 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0002, statreg=0x02a0, cachelnsz=1 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 map[10]: type Memory, range 32, base 0xfe02b000, size 12, enabled pcib0: matched entry for 0.19.INTA pcib0: slot 19 INTA hardwired to IRQ 18 unknown: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe02b000 ohci early: SMM active, request owner change found-> vendor=0x1002, dev=0x4398, revid=0x00 domain=0, bus=0, slot=19, func=1 class=0c-03-10, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02a0, cachelnsz=1 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 map[10]: type Memory, range 32, base 0xfe02a000, size 12, enabled pcib0: matched entry for 0.19.INTA pcib0: slot 19 INTA hardwired to IRQ 18 unknown: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe02a000 ohci early: SMM active, request owner change found-> vendor=0x1002, dev=0x4396, revid=0x00 domain=0, bus=0, slot=19, func=2 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0002, statreg=0x02b0, cachelnsz=1 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=3 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xfe029000, size 8, enabled pcib0: matched entry for 0.19.INTB pcib0: slot 19 INTB hardwired to IRQ 19 unknown: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfe029000 found-> vendor=0x1002, dev=0x4385, revid=0x3c domain=0, bus=0, slot=20, func=0 class=0c-05-00, hdrtype=0x00, mfdev=1 cmdreg=0x0403, statreg=0x0230, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1002, dev=0x439c, revid=0x00 domain=0, bus=0, slot=20, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0230, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 MSI supports 1 message map[20]: type I/O Port, range 32, base 0xfa00, size 4, enabled found-> vendor=0x1002, dev=0x4383, revid=0x00 domain=0, bus=0, slot=20, func=2 class=04-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0410, cachelnsz=1 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 64, base 0xfe024000, size 14, enabled pcib0: matched entry for 0.20.INTA pcib0: slot 20 INTA hardwired to IRQ 16 found-> vendor=0x1002, dev=0x439d, revid=0x00 domain=0, bus=0, slot=20, func=3 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x0220, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1002, dev=0x4384, revid=0x00 domain=0, bus=0, slot=20, func=4 class=06-04-01, hdrtype=0x01, mfdev=1 cmdreg=0x0027, statreg=0x02a0, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1002, dev=0x4399, revid=0x00 domain=0, bus=0, slot=20, func=5 class=0c-03-10, hdrtype=0x00, mfdev=0 cmdreg=0x0002, statreg=0x02a0, cachelnsz=1 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=5 map[10]: type Memory, range 32, base 0xfe028000, size 12, enabled pcib0: matched entry for 0.20.INTC pcib0: slot 20 INTC hardwired to IRQ 18 unknown: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe028000 ohci early: SMM active, request owner change found-> vendor=0x1022, dev=0x1200, revid=0x00 domain=0, bus=0, slot=24, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1201, revid=0x00 domain=0, bus=0, slot=24, func=1 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1202, revid=0x00 domain=0, bus=0, slot=24, func=2 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1203, revid=0x00 domain=0, bus=0, slot=24, func=3 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1204, revid=0x00 domain=0, bus=0, slot=24, func=4 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) pcib1: at device 1.0 on pci0 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xe000-0xefff pcib1: memory decode 0xfdd00000-0xfdefffff pcib1: prefetched decode 0xd8000000-0xdfffffff pci1: on pcib1 pci1: domain=0, physical bus=1 found-> vendor=0x1002, dev=0x796e, revid=0x00 domain=0, bus=1, slot=5, func=0 class=03-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=1 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Prefetchable Memory, range 64, base 0xd8000000, size 27, enabled pcib1: requested memory range 0xd8000000-0xdfffffff: good map[18]: type Memory, range 64, base 0xfdee0000, size 16, enabled pcib1: requested memory range 0xfdee0000-0xfdeeffff: good map[20]: type I/O Port, range 32, base 0xee00, size 8, enabled pcib1: requested I/O range 0xee00-0xeeff: in range map[24]: type Memory, range 32, base 0xfdd00000, size 20, enabled pcib1: requested memory range 0xfdd00000-0xfddfffff: good pcib1: matched entry for 1.5.INTA pcib1: slot 5 INTA hardwired to IRQ 18 found-> vendor=0x1002, dev=0x7919, revid=0x00 domain=0, bus=1, slot=5, func=2 class=04-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=1 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=3 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 64, base 0xfdefc000, size 14, enabled pcib1: requested memory range 0xfdefc000-0xfdefffff: good pcib1: matched entry for 1.5.INTB pcib1: slot 5 INTB hardwired to IRQ 19 vgapci0: port 0xee00-0xeeff mem 0xd8000000-0xdfffffff,0xfdee0000-0xfdeeffff,0xfdd00000-0xfddfffff irq 18 at device 5.0 on pci1 pci1: at device 5.2 (no driver attached) pcib2: at device 4.0 on pci0 pcib2: domain 0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0xd000-0xdfff pcib2: memory decode 0xfdc00000-0xfdcfffff pcib2: prefetched decode 0xfdb00000-0xfdbfffff pci2: on pcib2 pci2: domain=0, physical bus=2 found-> vendor=0x1095, dev=0x3531, revid=0x01 domain=0, bus=2, slot=0, func=0 class=01-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=1 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 64, base 0xfdcff000, size 7, enabled pcib2: requested memory range 0xfdcff000-0xfdcff07f: good map[18]: type Memory, range 64, base 0xfdcfc000, size 13, enabled pcib2: requested memory range 0xfdcfc000-0xfdcfdfff: good map[20]: type I/O Port, range 32, base 0xdf00, size 7, enabled pcib2: requested I/O range 0xdf00-0xdf7f: in range pcib2: matched entry for 2.0.INTA pcib2: slot 0 INTA hardwired to IRQ 16 siis0: port 0xdf00-0xdf7f mem 0xfdcff000-0xfdcff07f,0xfdcfc000-0xfdcfdfff irq 16 at device 0.0 on pci2 siis0: Reserved 0x80 bytes for rid 0x10 type 3 at 0xfdcff000 siis0: Reserved 0x2000 bytes for rid 0x18 type 3 at 0xfdcfc000 ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 49 siis0: [MPSAFE] siis0: [ITHREAD] siisch0: at channel 0 on siis0 siisch0: [MPSAFE] siisch0: [ITHREAD] pcib3: at device 6.0 on pci0 pcib3: domain 0 pcib3: secondary bus 3 pcib3: subordinate bus 3 pcib3: I/O decode 0xc000-0xcfff pcib3: memory decode 0xfd800000-0xfd8fffff pcib3: prefetched decode 0xfdf00000-0xfdffffff pci3: on pcib3 pci3: domain=0, physical bus=3 found-> vendor=0x10ec, dev=0x8168, revid=0x02 domain=0, bus=3, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=1 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 powerspec 3 supports D0 D1 D2 D3 current D0 MSI supports 2 messages, 64 bit MSI-X supports 2 messages in map 0x20 map[10]: type I/O Port, range 32, base 0xce00, size 8, enabled pcib3: requested I/O range 0xce00-0xceff: in range map[18]: type Prefetchable Memory, range 64, base 0xfdfff000, size 12, enabled pcib3: requested memory range 0xfdfff000-0xfdffffff: good map[20]: type Prefetchable Memory, range 64, base 0xfdfe0000, size 16, enabled pcib3: requested memory range 0xfdfe0000-0xfdfeffff: good pcib3: matched entry for 3.0.INTA pcib3: slot 0 INTA hardwired to IRQ 18 re0: port 0xce00-0xceff mem 0xfdfff000-0xfdffffff,0xfdfe0000-0xfdfeffff irq 18 at device 0.0 on pci3 re0: Reserved 0x1000 bytes for rid 0x18 type 3 at 0xfdfff000 re0: MSI count : 2 re0: attempting to allocate 1 MSI vectors (2 supported) msi: routing MSI IRQ 256 to local APIC 0 vector 50 re0: using IRQ 256 for MSI re0: Using 1 MSI messages re0: Chip rev. 0x3c000000 re0: MAC rev. 0x00400000 miibus0: on re0 rgephy0: PHY 1 on miibus0 rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto re0: bpf attached re0: Ethernet address: 00:24:1d:d0:c7:fe re0: [MPSAFE] re0: [FILTER] atapci0: port 0xff00-0xff07,0xfe00-0xfe03,0xfd00-0xfd07,0xfc00-0xfc03,0xfb00-0xfb0f mem 0xfe02f000-0xfe02f3ff irq 22 at device 17.0 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfb00 atapci0: Reserved 0x400 bytes for rid 0x24 type 3 at 0xfe02f000 ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 0 vector 51 atapci0: [MPSAFE] atapci0: [ITHREAD] atapci0: AHCI v1.10 controller with 6 3Gbps ports, PM supported atapci0: Caps: 64bit NCQ SNTF MPS ALP AL CLO 3Gbps PM PMD SSC PSC 32cmd CCC 6ports ata2: on atapci0 ata2: AHCI reset... ata2: hardware reset ... ata2: SATA connect time=0ms status=00000123 ata2: ready wait time=8ms ata2: software reset port 15... ata2: ready wait time=0ms ata2: SIGNATURE: 00000101 ata2: AHCI reset done: devices=00000001 ata2: [MPSAFE] ata2: [ITHREAD] ata3: on atapci0 ata3: AHCI reset... ata3: hardware reset ... ata3: SATA connect time=0ms status=00000123 ata3: ready wait time=10ms ata3: software reset port 15... ata3: ready wait time=0ms ata3: SIGNATURE: 00000101 ata3: AHCI reset done: devices=00000001 ata3: [MPSAFE] ata3: [ITHREAD] ata4: on atapci0 ata4: AHCI reset... ata4: hardware reset ... ata4: SATA connect time=0ms status=00000123 ata4: ready wait time=4ms ata4: software reset port 15... ata4: ready wait time=0ms ata4: SIGNATURE: 00000101 ata4: AHCI reset done: devices=00000001 ata4: [MPSAFE] ata4: [ITHREAD] ata5: on atapci0 ata5: AHCI reset... ata5: hardware reset ... ata5: SATA connect time=0ms status=00000123 ata5: ready wait time=4ms ata5: software reset port 15... ata5: ready wait time=0ms ata5: SIGNATURE: 00000101 ata5: AHCI reset done: devices=00000001 ata5: [MPSAFE] ata5: [ITHREAD] ata6: on atapci0 ata6: AHCI reset... ata6: hardware reset ... ata6: SATA connect time=0ms status=00000123 ata6: ready wait time=4ms ata6: software reset port 15... ata6: ready wait time=0ms ata6: SIGNATURE: 00000101 ata6: AHCI reset done: devices=00000001 ata6: [MPSAFE] ata6: [ITHREAD] ata7: on atapci0 ata7: AHCI reset... ata7: hardware reset ... ata7: SATA connect time=0ms status=00000123 ata7: ready wait time=4ms ata7: software reset port 15... ata7: ready wait time=0ms ata7: SIGNATURE: 00000101 ata7: AHCI reset done: devices=00000001 ata7: [MPSAFE] ata7: [ITHREAD] ohci0: mem 0xfe02e000-0xfe02efff irq 16 at device 18.0 on pci0 ohci0: [MPSAFE] ohci0: [ITHREAD] usbus0: on ohci0 ohci1: mem 0xfe02d000-0xfe02dfff irq 16 at device 18.1 on pci0 ohci1: [MPSAFE] ohci1: [ITHREAD] usbus1: on ohci1 ehci0: mem 0xfe02c000-0xfe02c0ff irq 17 at device 18.2 on pci0 ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 0 vector 52 ehci0: [MPSAFE] ehci0: [ITHREAD] ehci0: Dropped interrupts workaround enabled usbus2: EHCI version 1.0 usbus2: on ehci0 ohci2: mem 0xfe02b000-0xfe02bfff irq 18 at device 19.0 on pci0 ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 53 ohci2: [MPSAFE] ohci2: [ITHREAD] usbus3: on ohci2 ohci3: mem 0xfe02a000-0xfe02afff irq 18 at device 19.1 on pci0 ohci3: [MPSAFE] ohci3: [ITHREAD] usbus4: on ohci3 ehci1: mem 0xfe029000-0xfe0290ff irq 19 at device 19.2 on pci0 ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 54 ehci1: [MPSAFE] ehci1: [ITHREAD] ehci1: Dropped interrupts workaround enabled usbus5: EHCI version 1.0 usbus5: on ehci1 pci0: at device 20.0 (no driver attached) atapci1: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfa00-0xfa0f at device 20.1 on pci0 atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfa00 atapci1: SATA controller enabled (secondary channel) ata0: on atapci1 atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci1: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=7f ostat1=7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: reset tp2 stat0=ff stat1=ff devices=0x0 ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 55 ata0: [MPSAFE] ata0: [ITHREAD] pci0: at device 20.2 (no driver attached) isab0: at device 20.3 on pci0 isa0: on isab0 pcib4: at device 20.4 on pci0 pcib4: domain 0 pcib4: secondary bus 4 pcib4: subordinate bus 4 pcib4: I/O decode 0xb000-0xbfff pcib4: memory decode 0xfda00000-0xfdafffff pcib4: prefetched decode 0xfd900000-0xfd9fffff pcib4: Subtractively decoded bridge. pci4: on pcib4 pci4: domain=0, physical bus=4 ohci4: mem 0xfe028000-0xfe028fff irq 18 at device 20.5 on pci0 ohci4: [MPSAFE] ohci4: [ITHREAD] usbus6: on ohci4 amdtemp0: on hostb4 fdc0: port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: ic_type 90 part_id 80 ioapic0: routing intpin 6 (ISA IRQ 6) to lapic 0 vector 56 fdc0: [FILTER] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 57 uart0: [FILTER] uart0: fast interrupt ppc0: using extended I/O port range ppc0: SPP ppc0: port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ioapic0: routing intpin 7 (ISA IRQ 7) to lapic 0 vector 58 ppc0: [MPSAFE] ppc0: [ITHREAD] ppbus0: on ppc0 plip0: on ppbus0 plip0: bpf attached plip0: [MPSAFE] plip0: [ITHREAD] lpt0: on ppbus0 lpt0: [MPSAFE] lpt0: [ITHREAD] lpt0: Interrupt-driven port ppi0: on ppbus0 atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 59 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: unable to allocate IRQ atrtc0: port 0x70-0x73 on acpi0 atrtc0: registered as a time-of-day clock (resolution 1000000us) cpu0: on acpi0 cpu0: switching to generic Cx mode hwpstate0: on cpu0 cpu1: on acpi0 ahc_isa_probe 0: ioport 0xc00 alloc failed ex_isa_identify() isa_probe_children: disabling PnP devices atkbdc: atkbdc0 already exists; skipping it atrtc: atrtc0 already exists; skipping it fdc: fdc0 already exists; skipping it ppc: ppc0 already exists; skipping it sc: sc0 already exists; skipping it uart: uart0 already exists; skipping it isa_probe_children: probing non-PnP devices orm0: at iomem 0xc0000-0xcd7ff on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: scteken (teken terminal) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 uart1: failed to probe at port 0x2f8-0x2ff irq 3 on isa0 isa_probe_children: probing PnP devices Device configuration finished. Reducing kern.maxvnodes 250078 -> 100000 procfs registered ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present; to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf. ZFS filesystem version 3 ZFS storage pool version 14 lapic: Divisor 2, Frequency 100706364 hz Timecounter "TSC" frequency 2819777884 Hz quality -100 Timecounters tick every 1.000 msec vlan: initialized, using hash tables with chaining lo0: bpf attached hptrr: no controller detected. Waiting 5 seconds for SCSI devices to settle siisch0: SIIS reset... siisch0: device reset time=0ms siisch0: SATA connect time=0ms status=00000123 siisch0: ready wait time=0ms siisch0: SIIS reset done: devices=00000001 ata0: Identifying devices: 00000000 ata0: New devices: 00000000 ata2: Identifying devices: 00000001 ata2: New devices: 00000001 usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 480Mbps High Speed USB v2.0 usbus3: 12Mbps Full Speed USB v1.0 usbus4: 12Mbps Full Speed USB v1.0 usbus5: 480Mbps High Speed USB v2.0 usbus6: 12Mbps Full Speed USB v1.0 ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ad4: setting UDMA100 ad4: 238475MB at ata2-master UDMA100 SATA 3Gb/s ad4: 488397168 sectors [484521C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad4 ugen0.1: at usbus0 uhub0: on usbus0 ugen1.1: at usbus1 uhub1: on usbus1 ugen2.1: at usbus2 uhub2: on usbus2 ugen3.1: at usbus3 uhub3: on usbus3 ugen4.1: at usbus4 uhub4: on usbus4 ugen5.1: at usbus5 uhub5: on usbus5 ugen6.1: at usbus6 uhub6: on usbus6 ad4: Silicon Image check1 failed ad4: Adaptec check1 failed ad4: LSI (v3) check1 failed ad4: LSI (v2) check1 failed ad4: FreeBSD check1 failed ata3: Identifying devices: 00000001 ata3: New devices: 00000001 ata3-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ad6: setting UDMA100 ad6: 238475MB at ata3-master UDMA100 SATA 3Gb/s ad6: 488397168 sectors [484521C/16H/63S] 16 sectors/interrupt 1 depth queue ad6: Silicon Image check1 failed GEOM: new disk ad6 ad6: Adaptec check1 failed ad6: LSI (v3) check1 failed ad6: LSI (v2) check1 failed ad6: FreeBSD check1 failed ata4: Identifying devices: 00000001 ata4: New devices: 00000001 ata4-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ad8: setting UDMA100 ad8: 953869MB at ata4-master UDMA100 SATA 3Gb/s ad8: 1953525168 sectors [1938021C/16H/63S] 16 sectors/interrupt 1 depth queue ad8: Silicon Image check3 failed ad8: Adaptec check1 failed ad8: LSI (v3) check1 failed ad8: LSI (v2) check1 failed ad8: FreeBSD check1 failed ata5: Identifying devices: 00000001 ata5: New devices: 00000001 GEOM: new disk ad8 ata5-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ad10: setting UDMA100 ad10: 953869MB at ata5-master UDMA100 SATA 3Gb/s ad10: 1953525168 sectors [1938021C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad10 ad10: Silicon Image check3 failed ad10: Adaptec check1 failed ad10: LSI (v3) check1 failed ad10: LSI (v2) check1 failed ad10: FreeBSD check1 failed ata6: Identifying devices: 00000001 ata6: New devices: 00000001 ata6-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ad12: setting UDMA100 ad12: 953869MB at ata6-master UDMA100 SATA 3Gb/s ad12: 1953525168 sectors [1938021C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad12 ad12: Silicon Image check3 failed ad12: Adaptec check1 failed ad12: LSI (v3) check1 failed ad12: LSI (v2) check1 failed ad12: FreeBSD check1 failed ata7: Identifying devices: 00000001 ata7: New devices: 00000001 ata7-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ad14: setting UDMA100 ad14: 953869MB at ata7-master UDMA100 SATA 3Gb/s ad14: 1953525168 sectors [1938021C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad14 uhub6: 2 ports with 2 removable, self powered ad14: Silicon Image check3 failed uhub0: 3 ports with 3 removable, self powered uhub1: 3 ports with 3 removable, self powered uhub3: 3 ports with 3 removable, self powered uhub4: 3 ports with 3 removable, self powered ad14: Adaptec check1 failed ad14: LSI (v3) check1 failed ad14: LSI (v2) check1 failed ad14: FreeBSD check1 failed uhub2: 6 ports with 6 removable, self powered uhub5: 6 ports with 6 removable, self powered (aprobe0:siisch0:0:15:0): SIGNATURE: 0000 (aprobe0:siisch0:0:0:0): SIGNATURE: 0000 ada0 at siisch0 bus 0 scbus0 target 0 lun 0 ada0: ATA-8 SATA 2.x device ada0: Serial Number S246J1KSB01867 ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO size 8192bytes) ada0: Command Queueing enabled ada0: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C) pass0 at siisch0 bus 0 scbus0 target 0 lun 0 pass0: ATA-8 SATA 2.x deviceATA PseudoRAID loaded SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400 ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 1 vector 48 ioapic0: routing intpin 7 (ISA IRQ 7) to lapic 1 vector 49 ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 1 vector 50 ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 1 vector 51 ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 1 vector 52 msi: Assigning MSI IRQ 256 to local APIC 1 vector 53 GEOM: new disk ada0 pass0: Serial Number S246J1KSB01867 pass0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO size 8192bytes) pass0: Command Queueing enabled Trying to mount root from zfs:zroot ct_to_ts([2010-01-31 18:57:24]) = 1264964244.000000000 start_init: trying /sbin/init re0: link state changed to UP