Copyright (c) 1992-2010 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.1-STABLE #0: Sun Nov 14 13:20:33 CET 2010 root@test-fi.kg4.no:/usr/obj/usr/src/sys/GENERIC i386 Preloaded elf kernel "/boot/kernel/kernel" at 0xc1044000. Preloaded elf module "/boot/kernel/if_ipw.ko" at 0xc10441c4. Preloaded elf module "/boot/kernel/snd_ich.ko" at 0xc1044270. Preloaded elf module "/boot/kernel/sound.ko" at 0xc104431c. Preloaded elf module "/boot/kernel/ichsmb.ko" at 0xc10443c8. Preloaded elf module "/boot/kernel/smbus.ko" at 0xc1044474. Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 1599954271 Hz CPU: Intel(R) Pentium(R) M processor 1600MHz (1599.95-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x695 Family = 6 Model = 9 Stepping = 5 Features=0xa7e9f9bf Features2=0x180 Instruction TLB: 4 KB Pages, 4-way set associative, 128 entries Data TLB: 4 KB Pages, 4-way set associative, 128 entries Instruction TLB: 4 MB pages, fully associative, 2 entries 2nd-level cache: 1 MB, 8-way set associative, 64 byte line size 1st-level instruction cache: 32 KB, 8-way set associative, 64 byte line size Data TLB: 4 MB Pages, 4-way set associative, 8 entries 1st-level data cache: 32 KB, 8-way set associative, 64 byte line size real memory = 536870912 (512 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000001426000 - 0x000000001edd2fff, 496685056 bytes (121261 pages) avail memory = 497106944 (474 MB) bios32: Found BIOS32 Service Directory header at 0xc00f5920 bios32: Entry = 0xfd750 (c00fd750) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xfd750+0x262 pnpbios: Found PnP BIOS data at 0xc00f59a0 pnpbios: Entry = f0000:a62e Rev = 1.0 Other BIOS signatures found: x86bios: IVT 0x000000-0x0004ff at 0xc0000000 x86bios: SSEG 0x010000-0x01ffff at 0xc3380000 x86bios: EBDA 0x09f000-0x09ffff at 0xc009f000 x86bios: ROM 0x0a0000-0x0effff at 0xc00a0000 ULE: setup cpu 0 snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024] feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25 wlan: <802.11 Link Layer> null: random: nfslock: pseudo-device io: kbd: new array size 4 kbd1 at kbdmux0 mem: Pentium Pro MTRR support enabled hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 ACPI: RSDP 0xf5970 00014 (v00 FUJ ) ACPI: RSDT 0x1f6f1d9e 00034 (v01 FUJ FJNB16C 01230000 FUJ 00001000) ACPI: FACP 0x1f6f78e0 00074 (v01 FUJ FJNB16C 01230000 FUJ 00001000) ACPI: DSDT 0x1f6f1dd2 05B0E (v01 FUJ FJNB16C 01230000 MSFT 0100000E) ACPI: FACS 0x1f6f8fc0 00040 ACPI: SSDT 0x1f6f7954 00288 (v01 FUJ FJNB16C 01230000 INTL 20030228) ACPI: SSDT 0x1f6f7d68 00270 (v01 FUJ FJNB16C 01230000 MSFT 0100000E) ACPI: BOOT 0x1f6f7fd8 00028 (v01 FUJ FJNB16C 01230000 FUJ 00001000) npx0: INT 16 interface acpi0: on motherboard acpi0: [MPSAFE] acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: wakeup code va 0xc31b8000 pa 0x1000 atpic: Programming IRQ9 as level/low pci_open(1): mode 1 addr port (0x0cf8) is 0x8000f904 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=35808086) pcibios: BIOS version 2.10 AcpiOsDerivePciId: \\_SB_.PCI0.HBUS -> bus 0 dev 0 func 0 AcpiOsDerivePciId: \\_SB_.PCI0.MBUS.MBUS -> bus 0 dev 0 func 1 AcpiOsDerivePciId: \\_SB_.PCI0.LPC0.REGS -> bus 0 dev 31 func 0 AcpiOsDerivePciId: \\_SB_.PCI0.LPC0.PIRQ -> bus 0 dev 31 func 0 ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0xfc08-0xfc0b on acpi0 cpu0: on acpi0 cpu0: switching to generic Cx mode pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 7 9 10 11 Validation 0 11 N 0 3 4 5 7 9 10 11 After Disable 0 255 N 0 3 4 5 7 9 10 11 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 7 9 10 11 Validation 0 11 N 0 3 4 5 7 9 10 11 After Disable 0 255 N 0 3 4 5 7 9 10 11 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 7 9 10 11 Validation 0 11 N 0 3 4 5 7 9 10 11 After Disable 0 255 N 0 3 4 5 7 9 10 11 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 7 9 10 11 Validation 0 11 N 0 3 4 5 7 9 10 11 After Disable 0 255 N 0 3 4 5 7 9 10 11 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 7 9 10 11 Validation 0 11 N 0 3 4 5 7 9 10 11 After Disable 0 255 N 0 3 4 5 7 9 10 11 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 7 9 10 11 Validation 0 11 N 0 3 4 5 7 9 10 11 After Disable 0 255 N 0 3 4 5 7 9 10 11 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 7 9 10 11 Validation 0 255 N 0 3 4 5 7 9 10 11 After Disable 0 255 N 0 3 4 5 7 9 10 11 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 7 9 10 11 Validation 0 11 N 0 3 4 5 7 9 10 11 After Disable 0 255 N 0 3 4 5 7 9 10 11 pcib0: port 0xcf8-0xcff on acpi0 ACPI: Found matching pin for 0.2.INTA at func 0: 11 ACPI: Found matching pin for 0.29.INTA at func 0: 11 ACPI: Found matching pin for 0.29.INTB at func 1: 11 ACPI: Found matching pin for 0.29.INTC at func 2: 11 ACPI: Found matching pin for 0.29.INTD at func 7: 11 ACPI: Found matching pin for 0.31.INTA at func 1: 255 ACPI: Found matching pin for 0.31.INTB at func 3: 11 pci0: on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x8086, dev=0x3580, revid=0x02 domain=0, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x3584, revid=0x02 domain=0, bus=0, slot=0, func=1 class=08-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0080, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x3585, revid=0x02 domain=0, bus=0, slot=0, func=3 class=08-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0080, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x3582, revid=0x02 domain=0, bus=0, slot=2, func=0 class=03-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0003, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 1 supports D0 D1 D3 current D0 map[10]: type Prefetchable Memory, range 32, base 0xd8000000, size 27, enabled map[14]: type Memory, range 32, base 0xd0000000, size 19, enabled map[18]: type I/O Port, range 32, base 0x1800, size 3, enabled pcib0: matched entry for 0.2.INTA (src \\_SB_.PCI0.LPC0.LNKA:0) pcib0: slot 2 INTA routed to irq 11 via \\_SB_.PCI0.LPC0.LNKA found-> vendor=0x8086, dev=0x3582, revid=0x02 domain=0, bus=0, slot=2, func=1 class=03-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0003, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 1 supports D0 D1 D3 current D0 map[10]: type Prefetchable Memory, range 32, base 0xe0000000, size 27, enabled map[14]: type Memory, range 32, base 0xd0080000, size 19, enabled found-> vendor=0x8086, dev=0x24c2, revid=0x03 domain=0, bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[20]: type I/O Port, range 32, base 0x1820, size 5, enabled pcib0: matched entry for 0.29.INTA (src \\_SB_.PCI0.LPC0.LNKA:0) pcib0: slot 29 INTA routed to irq 11 via \\_SB_.PCI0.LPC0.LNKA unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1820 found-> vendor=0x8086, dev=0x24c4, revid=0x03 domain=0, bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 map[20]: type I/O Port, range 32, base 0x1840, size 5, enabled pcib0: matched entry for 0.29.INTB (src \\_SB_.PCI0.LPC0.LNKD:0) pcib0: slot 29 INTB routed to irq 11 via \\_SB_.PCI0.LPC0.LNKD unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1840 found-> vendor=0x8086, dev=0x24c7, revid=0x03 domain=0, bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=11 map[20]: type I/O Port, range 32, base 0x1860, size 5, enabled pcib0: matched entry for 0.29.INTC (src \\_SB_.PCI0.LPC0.LNKC:0) pcib0: slot 29 INTC routed to irq 11 via \\_SB_.PCI0.LPC0.LNKC unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1860 found-> vendor=0x8086, dev=0x24cd, revid=0x03 domain=0, bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xd0100000, size 10, enabled pcib0: matched entry for 0.29.INTD (src \\_SB_.PCI0.LPC0.LNKH:0) pcib0: slot 29 INTD routed to irq 11 via \\_SB_.PCI0.LPC0.LNKH unknown: Reserved 0x400 bytes for rid 0x10 type 3 at 0xd0100000 found-> vendor=0x8086, dev=0x2448, revid=0x83 domain=0, bus=0, slot=30, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x8080, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x24cc, revid=0x03 domain=0, bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x24ca, revid=0x03 domain=0, bus=0, slot=31, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 map[20]: type I/O Port, range 32, base 0x1810, size 4, enabled map[24]: type Memory, range 32, base 0, size 10, memory disabled found-> vendor=0x8086, dev=0x24c3, revid=0x03 domain=0, bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 map[20]: type I/O Port, range 32, base 0x1880, size 5, enabled pcib0: matched entry for 0.31.INTB (src \\_SB_.PCI0.LPC0.LNKB:0) pcib0: slot 31 INTB routed to irq 11 via \\_SB_.PCI0.LPC0.LNKB found-> vendor=0x8086, dev=0x24c5, revid=0x03 domain=0, bus=0, slot=31, func=5 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0x1c00, size 8, enabled map[14]: type I/O Port, range 32, base 0x18c0, size 6, enabled map[18]: type Memory, range 32, base 0xd0100c00, size 9, enabled map[1c]: type Memory, range 32, base 0xd0100800, size 8, enabled pcib0: matched entry for 0.31.INTB (src \\_SB_.PCI0.LPC0.LNKB:0) pcib0: slot 31 INTB routed to irq 11 via \\_SB_.PCI0.LPC0.LNKB found-> vendor=0x8086, dev=0x24c6, revid=0x03 domain=0, bus=0, slot=31, func=6 class=07-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0x2400, size 8, enabled map[14]: type I/O Port, range 32, base 0x2000, size 7, enabled pcib0: matched entry for 0.31.INTB (src \\_SB_.PCI0.LPC0.LNKB:0) pcib0: slot 31 INTB routed to irq 11 via \\_SB_.PCI0.LPC0.LNKB pci0: at device 0.1 (no driver attached) pci0: at device 0.3 (no driver attached) vgapci0: port 0x1800-0x1807 mem 0xd8000000-0xdfffffff,0xd0000000-0xd007ffff irq 11 at device 2.0 on pci0 agp0: on vgapci0 vgapci0: Reserved 0x8000000 bytes for rid 0x10 type 3 at 0xd8000000 vgapci0: Reserved 0x80000 bytes for rid 0x14 type 3 at 0xd0000000 agp0: detected 8060k stolen memory agp0: aperture size is 128M vgapci1: mem 0xe0000000-0xe7ffffff,0xd0080000-0xd00fffff at device 2.1 on pci0 uhci0: port 0x1820-0x183f irq 11 at device 29.0 on pci0 uhci0: [MPSAFE] uhci0: [ITHREAD] usbus0: on uhci0 uhci1: port 0x1840-0x185f irq 11 at device 29.1 on pci0 uhci1: [MPSAFE] uhci1: [ITHREAD] usbus1: on uhci1 uhci2: port 0x1860-0x187f irq 11 at device 29.2 on pci0 uhci2: [MPSAFE] uhci2: [ITHREAD] usbus2: on uhci2 ehci0: mem 0xd0100000-0xd01003ff irq 11 at device 29.7 on pci0 ehci0: [MPSAFE] ehci0: [ITHREAD] usbus3: EHCI version 1.0 usbus3: on ehci0 pcib1: at device 30.0 on pci0 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 3 pcib1: I/O decode 0x3000-0x3fff pcib1: memory decode 0xd0200000-0xd02fffff pcib1: no prefetched decode pcib1: Subtractively decoded bridge. ACPI: Found matching pin for 1.10.INTA at func 0: 11 ACPI: Found matching pin for 1.10.INTB at func 1: 11 ACPI: Found matching pin for 1.12.INTA at func 0: 11 ACPI: Found matching pin for 1.13.INTA at func 0: 11 ACPI: Found matching pin for 1.14.INTA at func 0: 11 pci1: on pcib1 pci1: domain=0, physical bus=1 found-> vendor=0x1217, dev=0x6933, revid=0x02 domain=0, bus=1, slot=10, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0007, statreg=0x0410, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x80 (32000 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0, size 12, enabled pcib1: matched entry for 1.10.INTA (src \\_SB_.PCI0.LPC0.LNKA:0) pcib1: slot 10 INTA routed to irq 11 via \\_SB_.PCI0.LPC0.LNKA found-> vendor=0x1217, dev=0x6933, revid=0x02 domain=0, bus=1, slot=10, func=1 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0007, statreg=0x0410, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x80 (32000 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0, size 12, enabled pcib1: matched entry for 1.10.INTB (src \\_SB_.PCI0.LPC0.LNKB:0) pcib1: slot 10 INTB routed to irq 11 via \\_SB_.PCI0.LPC0.LNKB found-> vendor=0x10ec, dev=0x8139, revid=0x10 domain=0, bus=1, slot=12, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0107, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type I/O Port, range 32, base 0x3000, size 8, enabled pcib1: requested I/O range 0x3000-0x30ff: in range map[14]: type Memory, range 32, base 0xd0204000, size 8, enabled pcib1: requested memory range 0xd0204000-0xd02040ff: good pcib1: matched entry for 1.12.INTA (src \\_SB_.PCI0.LPC0.LNKE:0) pcib1: slot 12 INTA routed to irq 11 via \\_SB_.PCI0.LPC0.LNKE found-> vendor=0x8086, dev=0x1043, revid=0x04 domain=0, bus=1, slot=13, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0116, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x22 (8500 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xd0205000, size 12, enabled pcib1: requested memory range 0xd0205000-0xd0205fff: good pcib1: matched entry for 1.13.INTA (src \\_SB_.PCI0.LPC0.LNKC:0) pcib1: slot 13 INTA routed to irq 11 via \\_SB_.PCI0.LPC0.LNKC found-> vendor=0x104c, dev=0x8026, revid=0x00 domain=0, bus=1, slot=14, func=0 class=0c-00-10, hdrtype=0x00, mfdev=0 cmdreg=0x0116, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xd0204800, size 11, enabled pcib1: requested memory range 0xd0204800-0xd0204fff: good map[14]: type Memory, range 32, base 0xd0200000, size 14, enabled pcib1: requested memory range 0xd0200000-0xd0203fff: good pcib1: matched entry for 1.14.INTA (src \\_SB_.PCI0.LPC0.LNKF:0) pcib1: slot 14 INTA routed to irq 11 via \\_SB_.PCI0.LPC0.LNKF cbb0: irq 11 at device 10.0 on pci1 pcib1: cbb0 requested memory range 0x0-0xffffffff: good cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0x80000000 cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x80000000 cardbus0: on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb0: [MPSAFE] cbb0: [FILTER] cbb0: PCI Configuration space: 0x00: 0x69331217 0x04100007 0x06070002 0x00824000 0x10: 0x80000000 0x020000a0 0x20020201 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffd 0x30: 0x00000001 0x0000fffd 0x00000001 0x0400010b 0x40: 0x10e610cf 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x00000000 0x00000000 0x00000000 0x00000000 0x90: 0x0c0023bf 0x824203ea 0x20500000 0x00000000 0xa0: 0xfe020001 0x00c04000 0x00000000 0x00000000 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 cbb1: irq 11 at device 10.1 on pci1 pcib1: cbb1 requested memory range 0x0-0xffffffff: good cbb1: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0x80001000 cbb1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x80001000 cardbus1: on cbb1 pccard1: <16-bit PCCard bus> on cbb1 cbb1: [MPSAFE] cbb1: [FILTER] cbb1: PCI Configuration space: 0x00: 0x69331217 0x04100007 0x06070002 0x00824000 0x10: 0x80001000 0x020000a0 0x20030301 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffd 0x30: 0x00000001 0x0000fffd 0x00000001 0x0400020b 0x40: 0x10e610cf 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x00000000 0x00000000 0x00000000 0x00000000 0x90: 0x0c0023bf 0x824203ea 0x20500000 0x00000000 0xa0: 0xfe020001 0x00c04000 0x00000000 0x00000000 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 rl0: port 0x3000-0x30ff mem 0xd0204000-0xd02040ff irq 11 at device 12.0 on pci1 rl0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x3000 miibus0: on rl0 rlphy0: PHY 0 on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: bpf attached rl0: Ethernet address: 00:0b:5d:24:ca:27 rl0: [MPSAFE] rl0: [ITHREAD] ipw0: mem 0xd0205000-0xd0205fff irq 11 at device 13.0 on pci1 ipw0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xd0205000 ipw0: [MPSAFE] ipw0: [ITHREAD] ipw0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps fwohci0: mem 0xd0204800-0xd0204fff,0xd0200000-0xd0203fff irq 11 at device 14.0 on pci1 fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xd0204800 fwohci0: [MPSAFE] fwohci0: [ITHREAD] fwohci0: OHCI version 1.10 (ROM=0) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:00:0e:10:01:61:22:af fwohci0: Phy 1394a available S400, 1 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: on fwohci0 dcons_crom0: on firewire0 dcons_crom0: bus_addr 0x1568000 fwe0: on firewire0 if_fwe0: Fake Ethernet address: 02:00:0e:61:22:af fwe0: bpf attached fwe0: Ethernet address: 02:00:0e:61:22:af fwip0: on firewire0 fwip0: bpf attached fwip0: Firewire address: 00:00:0e:10:01:61:22:af @ 0xfffe00000000, S400, maxrec 2048 fwohci0: Initiate bus reset fwohci0: fwohci_intr_core: BUS reset fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1810-0x181f at device 31.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1810 ata0: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=00 devices=0x1 ata0: [MPSAFE] ata0: [ITHREAD] ata1: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=51 ostat1=00 ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: reset tp2 stat0=00 stat1=00 devices=0x30000 ata1: [MPSAFE] ata1: [ITHREAD] ichsmb0: port 0x1880-0x189f irq 11 at device 31.3 on pci0 ichsmb0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1880 ichsmb0: [MPSAFE] ichsmb0: [ITHREAD] smbus0: on ichsmb0 pcm0: port 0x1c00-0x1cff,0x18c0-0x18ff mem 0xd0100c00-0xd0100dff,0xd0100800-0xd01008ff irq 11 at device 31.5 on pci0 pcm0: Reserved 0x200 bytes for rid 0x18 type 3 at 0xd0100c00 pcm0: Reserved 0x100 bytes for rid 0x1c type 3 at 0xd0100800 pcm0: [MPSAFE] pcm0: [ITHREAD] pcm0: pcm0: Codec features headphone, 20 bit DAC, 18 bit ADC, 5 bit master volume, SigmaTel 3D Enhancement pcm0: Primary codec extended features variable rate PCM, AMAP, reserved 4 pcm0: ac97 codec dac ready count: 0 pcm0: Mixer "vol": pcm0: Mixer "pcm": pcm0: Mixer "speaker": pcm0: Mixer "line": pcm0: Mixer "mic": pcm0: Mixer "cd": pcm0: Mixer "rec": pcm0: Mixer "igain": pcm0: Mixer "ogain": pcm0: Mixer "line1": pcm0: Mixer "phin": pcm0: Mixer "phout": pcm0: Mixer "video": pcm0: clone manager: deadline=750ms flags=0x8000001e pcm0: sndbuf_setmap 1ec30000, 4000; 0xd4ee6000 -> 1ec30000 pcm0: sndbuf_setmap 1ec34000, 4000; 0xd4eea000 -> 1ec34000 pci0: at device 31.6 (no driver attached) acpi_button0: on acpi0 acpi_lid0: on acpi0 acpi_acad0: on acpi0 battery0: on acpi0 battery1: on acpi0 atrtc0: port 0x70-0x71 irq 8 on acpi0 atrtc0: registered as a time-of-day clock (resolution 1000000us) psmcpnp0: irq 12 on acpi0 atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x54ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: current command byte:0047 psm0: irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model GlidePoint, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000008, packet size:3 psm0: syncmask:c0, syncbits:00 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart0: [FILTER] uart0: fast interrupt ppc0: using extended I/O port range ppc0: SPP EPP ppc0: port 0x378-0x37f,0x778-0x77b irq 7 on acpi0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode ppc0: [MPSAFE] ppc0: [ITHREAD] ppbus0: on ppc0 plip0: on ppbus0 plip0: bpf attached plip0: [MPSAFE] plip0: [ITHREAD] lpt0: on ppbus0 lpt0: [MPSAFE] lpt0: [ITHREAD] lpt0: Interrupt-driven port ppi0: on ppbus0 unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff ahc_isa_probe 1: ioport 0x1c00 alloc failed ex_isa_identify() pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete isa_probe_children: disabling PnP devices pmtimer0 on isa0 ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it atrtc: atrtc0 already exists; skipping it ppc: ppc0 already exists; skipping it sc: sc0 already exists; skipping it uart: uart0 already exists; skipping it isa_probe_children: probing non-PnP devices orm0: at iomem 0xdc000-0xdffff pnpid ORM0000 on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: scteken (teken terminal) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 uart1: failed to probe at port 0x2f8-0x2ff irq 3 on isa0 isa_probe_children: probing PnP devices est0: on cpu0 p4tcc0: on cpu0 Device configuration finished. procfs registered Timecounter "TSC" frequency 1599954271 Hz quality 800 Timecounters tick every 1.000 msec vlan: initialized, using hash tables with chaining firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me) firewire0: bus manager 0 lo0: bpf attached hptrr: no controller detected. ata0: Identifying devices: 00000001 ata0: New devices: 00000001 usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 480Mbps High Speed USB v2.0 ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire acpi_acad0: acline initialization start acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times battery0: ad0: setting UDMA100 battery initialization start battery0: critically low charge! battery0: battery initialization done, tried 1 times battery1: battery initialization start ad0: 38154MB at ata0-master UDMA100 ad0: 78140160 sectors [77520C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad0 ugen0.1: at usbus0 uhub0: on usbus0 ugen1.1: at usbus1 uhub1: on usbus1 ugen2.1: at usbus2 uhub2: on usbus2 ugen3.1: at usbus3 uhub3: on usbus3 ad0: Intel check1 failed ad0: Adaptec check1 failed ad0: LSI (v3) check1 failed ad0: LSI (v2) check1 failed ad0: FreeBSD check1 failed ata1: Identifying devices: 00030000 ata1: New devices: 00030000 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered ata1: reiniting channel .. ata1: reset tp1 mask=03 ostat0=00 ostat1=00 ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: reset tp2 stat0=00 stat1=00 devices=0x30000 ata1: reinit done .. unknown: FAILURE - ATAPI_IDENTIFY timed out LBA=0 ata1: reiniting channel .. ata1: reset tp1 mask=03 ostat0=00 ostat1=00 ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: reset tp2 stat0=00 stat1=00 devices=0x30000 ata1: reinit done .. unknown: FAILURE - ATAPI_IDENTIFY timed out LBA=0 ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire acd0: setting UDMA33 acd0: CDRW drive at ata1 as master acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, UDMA33 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: CDR, CDRW, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc pcm0: measured ac97 link rate at 48000 Hz ATA PseudoRAID loaded Root mount waiting for: usbus3 uhub3: 6 ports with 6 removable, self powered Trying to mount root from ufs:/dev/ad0s1a ct_to_ts([2010-11-14 17:23:46]) = 1289755426.000000000 start_init: trying /sbin/init ugen2.2: at usbus2 firmware: 'ipw_bss' version 130: 209190 bytes loaded at 0xc3ec1760 wlan0: bpf attached wlan0: bpf attached wlan0: Ethernet address: 00:0c:f1:06:32:c0 splash: image decoder found: blank_saver wlan0: link state changed to UP ipw0: need multicast update callback ipw0: need multicast update callback ipw0: need multicast update callback battery1: battery initialization failed, giving up