Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-STABLE #1: Sat May 10 01:56:29 CEST 2008
    root@testhost-1.kg4.no:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0dae000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0dae14c.
Calibrating clock(s) ... i8254 clock: 1193246 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 596923542 Hz
CPU: Intel Pentium III (596.92-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x683  Stepping = 3
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>

Instruction TLB: 4 KB pages, 4-way set associative, 32 entries
Instruction TLB: 4 MB pages, fully associative, 2 entries
Data TLB: 4 KB pages, 4-way set associative, 64 entries
2nd-level cache: 256 KB, 8-way set associative, 32 byte line size
1st-level instruction cache: 16 KB, 4-way set associative, 32 byte line size
Data TLB: 4 MB Pages, 4-way set associative, 8 entries
1st-level data cache: 16 KB, 4-way set associative, 32 byte line size
real memory  = 201261056 (191 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000001028000 - 0x000000000bc4dfff, 180510720 bytes (44070 pages)
avail memory = 182910976 (174 MB)
bios32: Found BIOS32 Service Directory header at 0xc00fa000
bios32: Entry = 0xf0000 (c00f0000)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xf0000+0x478
pnpbios: Found PnP BIOS data at 0xc00fbe10
pnpbios: Entry = f0000:be3e  Rev = 1.0
pnpbios: Event flag at fbe36
pnpbios: OEM ID 51b1110e
Other BIOS signatures found:
ULE: setup cpu group 0
ULE: setup cpu 0
ULE: adding cpu 0 to group 0: cpus 1 mask 0x1
ath_rate: version 1.2 <SampleRate bit-rate selection algorithm>
wlan_amrr: <AMRR Transmit Rate Control Algorithm>
wlan: <802.11 Link Layer>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
io: <I/O>
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 (May 10 2008 01:55:51)
ACPI: RSDP @ 0x0xf9970/0x0014 (v  0 COMPAQ)
ACPI: RSDT @ 0x0xbff4800/0x0028 (v  1 COMPAQ RSDTBL   0x00000001 CPQ  0x00000001)
ACPI: FACP @ 0x0xbff4828/0x0074 (v  1 COMPAQ CPQB151  0x20020315 CPQ  0x00000001)
ACPI: DSDT @ 0x0xbff48a0/0x6886 (v  1 COMPAQ ARMADAE7 0x00010000 MSFT 0x0100000C)
ACPI: FACS @ 0x0xbfffe80/0x0040
npx0: INT 16 interface
acpi0: <COMPAQ RSDTBL> on motherboard
acpi0: [MPSAFE]
acpi0: [ITHREAD]
acpi: bad write to port 0x070 (8), val 0x31
acpi: bad read from port 0x071 (8)
acpi: bad write to port 0x070 (8), val 0x30
acpi: bad read from port 0x071 (8)
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80003a0c
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=71908086)
pcibios: BIOS version 2.10
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.C005.C006 -> bus 0 dev 0 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.C005.C103.C104 -> bus 0 dev 4 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.C005.C106.C107 -> bus 0 dev 4 func 1
acpi0: Power Button (fixed)
acpi0: wakeup code va 0xc5812000 pa 0x1000
atpic: Programming IRQ9 as level/low
acpi: bad write to port 0x070 (8), val 0x31
acpi: bad read from port 0x071 (8)
acpi: bad write to port 0x070 (8), val 0x30
acpi: bad read from port 0x071 (8)
acpi: bad write to port 0x070 (8), val 0x31
acpi: bad read from port 0x071 (8)
acpi: bad write to port 0x070 (8), val 0x30
acpi: bad read from port 0x071 (8)
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.C005.C013.C030 -> bus 0 dev 7 func 0
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, bf00000 (3) failed
ACPI timer: 0/4 0/4 0/4 0/4 0/4 0/4 0/4 0/4 0/4 0/4 -> 0
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x5008-0x500b on acpi0
pci_link0:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  11
  Validation          0   11   N     0  11
  After Disable       0  255   N     0  11
pci_link1:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  11
  Validation          0  255   N     0  11
  After Disable       0  255   N     0  11
pci_link2:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  11
  Validation          0   11   N     0  11
  After Disable       0  255   N     0  11
pci_link3:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  11
  Validation          0   11   N     0  11
  After Disable       0  255   N     0  11
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_throttle0: P_CNT from P_BLK 0x5010
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
ACPI: Found matching pin for 0.4.INTA at func 0: 11
ACPI: Found matching pin for 0.7.INTD at func 2: 11
ACPI: Found matching pin for 0.8.INTA at func 0: 11
ACPI: Found matching pin for 0.9.INTA at func 0: 11
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found->	vendor=0x8086, dev=0x7190, revid=0x03
	domain=0, bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0xa210, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[10]: type Prefetchable Memory, range 32, base 0x50000000, size 26, enabled
found->	vendor=0x8086, dev=0x7191, revid=0x03
	domain=0, bus=0, slot=1, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0003, statreg=0x0220, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x8c (35000 ns), maxlat=0x00 (0 ns)
found->	vendor=0x104c, dev=0xac1c, revid=0x01
	domain=0, bus=0, slot=4, func=0
	class=06-07-00, hdrtype=0x02, mfdev=1
	cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x42 (1980 ns), mingnt=0xc0 (48000 ns), maxlat=0x03 (750 ns)
	intpin=a, irq=11
	powerspec 1  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0x41100000, size 12, enabled
pcib0: matched entry for 0.4.INTA (src \\_SB_.C142:0)
pcib0: slot 4 INTA routed to irq 11 via \\_SB_.C142
found->	vendor=0x104c, dev=0xac1c, revid=0x01
	domain=0, bus=0, slot=4, func=1
	class=06-07-00, hdrtype=0x02, mfdev=1
	cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x42 (1980 ns), mingnt=0xc0 (48000 ns), maxlat=0x03 (750 ns)
	intpin=a, irq=11
	powerspec 1  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0x41180000, size 12, enabled
pcib0: matched entry for 0.4.INTA (src \\_SB_.C142:0)
pcib0: slot 4 INTA routed to irq 11 via \\_SB_.C142
found->	vendor=0x8086, dev=0x7110, revid=0x02
	domain=0, bus=0, slot=7, func=0
	class=06-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x010f, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x7111, revid=0x01
	domain=0, bus=0, slot=7, func=1
	class=01-01-80, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[20]: type I/O Port, range 32, base 0x3420, size  4, enabled
found->	vendor=0x8086, dev=0x7112, revid=0x01
	domain=0, bus=0, slot=7, func=2
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x80 (3840 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=d, irq=11
	map[20]: type I/O Port, range 32, base 0x3400, size  5, enabled
pcib0: matched entry for 0.7.INTD (src \\_SB_.C14A:0)
pcib0: slot 7 INTD routed to irq 11 via \\_SB_.C14A
found->	vendor=0x8086, dev=0x7113, revid=0x03
	domain=0, bus=0, slot=7, func=3
	class=06-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[90]: type I/O Port, range 32, base 0x4000, size  4, enabled
pci0:0:8:0: Transition from D3 to D0
found->	vendor=0x125d, dev=0x1978, revid=0x10
	domain=0, bus=0, slot=8, func=0
	class=04-01-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x18 (6000 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type I/O Port, range 32, base 0x3000, size  8, enabled
pcib0: matched entry for 0.8.INTA (src \\_SB_.C149:0)
pcib0: slot 8 INTA routed to irq 11 via \\_SB_.C149
found->	vendor=0x8086, dev=0x1229, revid=0x09
	domain=0, bus=0, slot=9, func=0
	class=02-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0003, statreg=0x0290, cachelnsz=8 (dwords)
	lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0x41280000, size 12, enabled
	map[14]: type I/O Port, range 32, base 0x3440, size  6, enabled
	map[18]: type Memory, range 32, base 0x41200000, size 17, enabled
pcib0: matched entry for 0.9.INTA (src \\_SB_.C149:0)
pcib0: slot 9 INTA routed to irq 11 via \\_SB_.C149
found->	vendor=0x11c1, dev=0x0445, revid=0x00
	domain=0, bus=0, slot=9, func=1
	class=07-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0003, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type I/O Port, range 32, base 0x3430, size  3, enabled
	map[14]: type Memory, range 32, base 0x41300000, size 12, enabled
pcib0: matched entry for 0.9.INTA (src \\_SB_.C149:0)
pcib0: slot 9 INTA routed to irq 11 via \\_SB_.C149
agp0: <Intel 82443BX (440 BX) host to PCI bridge> on hostb0
hostb0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0x50000000
agp0: allocating GATT for aperture of size 64M
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1:   domain            0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0x2000-0x2fff
pcib1:   memory decode     0x40000000-0x410fffff
pcib1:   no prefetched decode
pcib1: could not get PCI interrupt routing table for \\_SB_.C005.C012 - AE_NOT_FOUND
pci1: <ACPI PCI bus> on pcib1
pci1: domain=0, physical bus=1
found->	vendor=0x1002, dev=0x4c4d, revid=0x64
	domain=0, bus=1, slot=0, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0087, statreg=0x0290, cachelnsz=8 (dwords)
	lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 1  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0x40000000, size 24, enabled
pcib1: requested memory range 0x40000000-0x40ffffff: good
	map[14]: type I/O Port, range 32, base 0x2000, size  8, enabled
pcib1: requested I/O range 0x2000-0x20ff: in range
	map[18]: type Memory, range 32, base 0x41000000, size 12, enabled
pcib1: requested memory range 0x41000000-0x41000fff: good
pcib0: matched entry for 0.1.INTA (src \\_SB_.C142:0)
pcib0: slot 1 INTA routed to irq 11 via \\_SB_.C142
pcib1: slot 0 INTA is routed to irq 11
vgapci0: <VGA-compatible display> port 0x2000-0x20ff mem 0x40000000-0x40ffffff,0x41000000-0x41000fff irq 11 at device 0.0 on pci1
cbb0: <TI1225 PCI-CardBus Bridge> mem 0x41100000-0x41100fff irq 11 at device 4.0 on pci0
cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x41100000
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [MPSAFE]
cbb0: [ITHREAD]
cbb0: PCI Configuration space:
  0x00: 0xac1c104c 0x02100007 0x06070001 0x00824208 
  0x10: 0x41100000 0x020000a0 0x20020200 0xfffff000 
  0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 
  0x30: 0x00000000 0xfffffffc 0x00000000 0x0740010b 
  0x40: 0xb1210e11 0x00000001 0x00000000 0x00000000 
  0x50: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x60: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x70: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x80: 0x28049060 0x00000000 0x00000000 0x01001c72 
  0x90: 0x60642280 0x00000000 0x00000000 0x00000000 
  0xa0: 0x7e210001 0x00800000 0x0000001c 0x0000001b 
  0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 
cbb1: <TI1225 PCI-CardBus Bridge> mem 0x41180000-0x41180fff irq 11 at device 4.1 on pci0
cbb1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x41180000
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
cbb1: [MPSAFE]
cbb1: [ITHREAD]
cbb1: PCI Configuration space:
  0x00: 0xac1c104c 0x02100007 0x06070001 0x00824208 
  0x10: 0x41180000 0x020000a0 0x20030300 0xfffff000 
  0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 
  0x30: 0x00000000 0xfffffffc 0x00000000 0x0740010b 
  0x40: 0xb1210e11 0x00000001 0x00000000 0x00000000 
  0x50: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x60: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x70: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x80: 0x28449060 0x00000000 0x00000000 0x01001c72 
  0x90: 0x60642280 0x00000000 0x00000000 0x00000000 
  0xa0: 0x7e210001 0x00800000 0x0000001c 0x0000001b 
  0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 
PCI-ISA bridge with incorrect subclass 0x80
PCI-ISA bridge with incorrect subclass 0x80
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x3420-0x342f at device 7.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x3420
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=50
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: reset tp2 stat0=50 stat1=00 devices=0x9<ATAPI_SLAVE,ATA_MASTER>
ata0: [MPSAFE]
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ata1: [MPSAFE]
ata1: [ITHREAD]
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x3400-0x341f irq 11 at device 7.2 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x3400
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge> at device 7.3 (no driver attached)
pci0: <multimedia, audio> at device 8.0 (no driver attached)
fxp0: <Intel 82559ER Pro/100 Ethernet> port 0x3440-0x347f mem 0x41280000-0x41280fff,0x41200000-0x4121ffff irq 11 at device 9.0 on pci0
fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x41280000
fxp0: using memory space register mapping
fxp0: PCI IDs: 8086 1229 8086 2204 0009
fxp0: Dynamic Standby mode is disabled
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> PHY 1 on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: bpf attached
fxp0: Ethernet address: 00:d0:59:1a:12:51
fxp0: [MPSAFE]
fxp0: [ITHREAD]
pci0: <simple comms, UART> at device 9.1 (no driver attached)
acpi_button0: <Sleep Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
battery1: <ACPI Control Method Battery> on acpi0
battery2: <ACPI Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000008, packet size:3
psm0: syncmask:c0, syncbits:00
sio0: irq maps: 0x201 0x211 0x201 0x201
sio0: irq maps: 0x201 0x211 0x201 0x201
sio0: <Standard PC COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: ic_type 90 part_id 80
fdc0: [FILTER]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x201 0x201 0x201 0x201
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x201 0x201 0x201 0x201
sio1: probe failed test(s): 0 1 2 4 6 7 9
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
ex_isa_identify()
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
sio: sio0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd17ff pnpid ORM0000 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
ppc0: parallel port not found.
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x201 0x201 0x201 0x201
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
umass0: <Cypress Semiconductor USB2.0 Storage Device, class 0/0, rev 2.00/0.01, addr 2> on uhub0
umass0:0:0:-1: Attached to scbus0
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 596923542 Hz quality 800
Timecounters tick every 1.000 msec
lo0: bpf attached
hptrr: no controller detected.
acpi_tz0: _AC2: temperature 57.0 >= setpoint 50.0
acpi_tz0: switched from NONE to _AC2: 57.0C
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
battery0: battery initialization start
battery0: battery initialization done, tried 1 times
battery1: battery initialization start
battery2: battery initialization start
ata0-slave: pio=PIO4 wdma=WDMA2 udma=UNSUPPORTED cable=40 wire
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA66 cable=40 wire
ad0: setting PIO4 on PIIX4 chip
ad0: setting UDMA33 on PIIX4 chip
ad0: 11513MB <HITACHI DK23AA-12 00XDA0H0> at ata0-master UDMA33
ad0: 23579136 sectors [24951C/15H/63S] 16 sectors/interrupt 1 depth queue
ad0: Intel check1 failed
ad0: Adaptec check1 failed
ad0: LSI (v3) check1 failed
ad0: LSI (v2) check1 failed
ad0: FreeBSD check1 failed
acd0: setting PIO4 on PIIX4 chip
acd0: <CD-224E/9.0B> CDROM drive at ata0 as slave
acd0: read 4134KB/s (4134KB/s), 512KB buffer, PIO4
acd0: Reads: CDR, CDDA stream
acd0: Writes:
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: CD-ROM 120mm data disc
fdc0: output ready timeout
fdc0: input ready timeout
fdc0: input ready timeout
fdc0: output ready timeout
fdc0: input ready timeout
fdc0: input ready timeout
fdc0: output ready timeout
fdc0: input ready timeout
fdc0: input ready timeout
fdc0: output ready timeout
fdc0: input ready timeout
fdc0: input ready timeout
GEOM: new disk ad0
(probe0:umass-sim0:0:0:0): Down reving Protocol Version from 2 to 0?
pass0 at umass-sim0 bus 0 target 0 lun 0
pass0: <SAMSUNG MP0804H 0000> Fixed Direct Access SCSI-0 device 
pass0: Serial Number 0S241JL0
pass0: 1.000MB/s transfers
ATA PseudoRAID loaded
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <SAMSUNG MP0804H 0000> Fixed Direct Access SCSI-0 device 
da0: Serial Number 0S241JL0
da0: 1.000MB/s transfers
da0: 76351MB (156368016 512 byte sectors: 255H 63S/T 9733C)
GEOM_LABEL: Label for provider acd0 is iso9660/plop_bootmanager.
GEOM: new disk da0
Trying to mount root from ufs:/dev/da0s1a
start_init: trying /sbin/init
fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.8
acpi_tz0: switched from _AC2 to NONE: 47.0C
battery1: battery initialization failed, giving up
battery2: battery initialization failed, giving up
pci0: driver added
found->	vendor=0x8086, dev=0x7113, revid=0x03
	domain=0, bus=0, slot=7, func=3
	class=06-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pci0:0:7:3: reprobing on driver added
intsmb0: <Intel PIIX4 SMBUS Interface> port 0x4000-0x400f at device 7.3 on pci0
intsmb0: Reserved 0x10 bytes for rid 0x90 type 4 at 0x4000
intsmb0: intr IRQ 9 enabled revision 0
intsmb0: [GIANT-LOCKED]
intsmb0: [ITHREAD]
intsmb0: PM I/O mapped 5000
smbus0: <System Management Bus> on intsmb0
found->	vendor=0x125d, dev=0x1978, revid=0x10
	domain=0, bus=0, slot=8, func=0
	class=04-01-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x18 (6000 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
pci0:0:8:0: reprobing on driver added
found->	vendor=0x11c1, dev=0x0445, revid=0x00
	domain=0, bus=0, slot=9, func=1
	class=07-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0003, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
pci0:0:9:1: reprobing on driver added
pci1: driver added
snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_buffersize=16384 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
pci0: driver added
found->	vendor=0x125d, dev=0x1978, revid=0x10
	domain=0, bus=0, slot=8, func=0
	class=04-01-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x18 (6000 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
pci0:0:8:0: reprobing on driver added
pcm0: <ESS Technology Maestro-2E> port 0x3000-0x30ff irq 11 at device 8.0 on pci0
setmap (3810000, c000), nseg=1, error=0
pcm0: Maestro status/record buffer: 0x3810000
pcm0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x3000
pcm0: [MPSAFE]
pcm0: [ITHREAD]
pcm0: <SigmaTel STAC9721/23 AC97 Codec (id = 0x83847609)>
pcm0: Codec features 18 bit DAC, 18 bit ADC, 5 bit master volume, SigmaTel 3D Enhancement
pcm0: Primary codec extended features AMAP
pcm0: ac97 codec dac ready count: 0
pcm0: Mixer "vol":
pcm0: Mixer "pcm":
pcm0: Mixer "speaker":
pcm0: Mixer "line":
pcm0: Mixer "mic":
pcm0: Mixer "cd":
pcm0: Mixer "rec":
pcm0: Mixer "igain":
pcm0: Mixer "ogain":
pcm0: Mixer "line1":
pcm0: Mixer "phin":
pcm0: Mixer "phout":
pcm0: Mixer "video":
pcm0: clone manager: deadline=750ms flags=0x8000001e
pci0:0:8:0: Transition from D0 to D2
pci0: Failed to set ACPI power state D2 on \\_SB_.C005.C189: AE_BAD_PARAMETER
setmap (381c000, 4000), nseg=1, error=0
setmap (380c000, 4000), nseg=1, error=0
setmap (3824000, 4000), nseg=1, error=0
setmap (3830000, 4000), nseg=1, error=0
Total of 1 bases are assigned.
ch.0: phys 0x381c000, wpwa 0x8000
ch.1: phys 0x380c000, wpwa 0x0
ch.2: phys 0x3824000, wpwa 0xc000
ch.3: phys 0x3830000, wpwa 0x12000
found->	vendor=0x11c1, dev=0x0445, revid=0x00
	domain=0, bus=0, slot=9, func=1
	class=07-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0003, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
pci0:0:9:1: reprobing on driver added
pci1: driver added