Table 'FACP' at 0xcfe80290 Table 'APIC' at 0xcfe80390 APIC: Found table at 0xcfe80390 APIC: Using the MADT enumerator. MADT: Found CPU APIC ID 0 ACPI ID 1: enabled SMP: Added CPU 0 (AP) MADT: Found CPU APIC ID 1 ACPI ID 2: enabled SMP: Added CPU 1 (AP) MADT: Found CPU APIC ID 2 ACPI ID 3: enabled SMP: Added CPU 2 (AP) MADT: Found CPU APIC ID 3 ACPI ID 4: enabled SMP: Added CPU 3 (AP) MADT: Found CPU APIC ID 132 ACPI ID 5: disabled MADT: Found CPU APIC ID 133 ACPI ID 6: disabled MADT: Found CPU APIC ID 134 ACPI ID 7: disabled MADT: Found CPU APIC ID 135 ACPI ID 8: disabled Copyright (c) 1992-2013 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.4-RELEASE #0 r251259: Sun Jun 2 21:26:57 UTC 2013 root@bake.isc.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64 gcc version 4.2.1 20070831 patched [FreeBSD] Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff8107f000. Preloaded elf obj module "/boot/kernel/ahci.ko" at 0xffffffff8107f200. Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 3415357881 Hz CPU: AMD Phenom(tm) II X4 965 Processor (3415.36-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0x100f43 Family = 10 Model = 4 Stepping = 3 Features=0x178bfbff Features2=0x802009 AMD Features=0xee500800 AMD Features2=0x837ff TSC: P-state invariant L1 2MB data TLB: 48 entries, fully associative L1 2MB instruction TLB: 16 entries, fully associative L1 4KB data TLB: 48 entries, fully associative L1 4KB instruction TLB: 32 entries, fully associative L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L2 2MB data TLB: 128 entries, 2-way associative L2 2MB instruction TLB: 0 entries, 2-way associative L2 4KB data TLB: 512 entries, 4-way associative L2 4KB instruction TLB: 512 entries, 4-way associative L2 unified cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative real memory = 34359738368 (32768 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009afff, 630784 bytes (154 pages) 0x00000000010aa000 - 0x00000000cfe7ffff, 3470614528 bytes (847318 pages) 0x0000000100000000 - 0x00000007f2733fff, 29837443072 bytes (7284532 pages) avail memory = 33103454208 (31569 MB) ACPI APIC Table: <082812 APIC1355> INTR: Adding local APIC 1 as a target INTR: Adding local APIC 2 as a target INTR: Adding local APIC 3 as a target FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 APIC: CPU 0 has ACPI ID 1 APIC: CPU 1 has ACPI ID 2 APIC: CPU 2 has ACPI ID 3 APIC: CPU 3 has ACPI ID 4 x86bios: IVT 0x000000-0x0004ff at 0xffffff0000000000 x86bios: SSEG 0x010000-0x01ffff at 0xffffff8000075000 x86bios: EBDA 0x09f000-0x09ffff at 0xffffff000009f000 x86bios: ROM 0x0a0000-0x0effff at 0xffffff00000a0000 ULE: setup cpu 0 ULE: setup cpu 1 ULE: setup cpu 2 ULE: setup cpu 3 ACPI: RSDP 0xfb490 00024 (v02 ACPIAM) ACPI: XSDT 0xcfe80100 00054 (v01 082812 XSDT1355 20120828 MSFT 00000097) ACPI: FACP 0xcfe80290 000F4 (v03 082812 FACP1355 20120828 MSFT 00000097) ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20101013/tbfadt-655) ACPI: DSDT 0xcfe80460 0DB4F (v01 A1863 A1863001 00000001 INTL 20060113) ACPI: FACS 0xcfe98000 00040 ACPI: APIC 0xcfe80390 0008C (v01 082812 APIC1355 20120828 MSFT 00000097) ACPI: MCFG 0xcfe80420 0003C (v01 082812 OEMMCFG 20120828 MSFT 00000097) ACPI: OEMB 0xcfe98040 00072 (v01 082812 OEMB1355 20120828 MSFT 00000097) ACPI: HPET 0xcfe8f460 00038 (v01 082812 OEMHPET 20120828 MSFT 00000097) ACPI: SSDT 0xcfe8f4a0 008BC (v01 A M I POWERNOW 00000001 AMD 00000001) MADT: Found IO APIC ID 4, Interrupt 0 at 0xfec00000 ioapic0: Routing external 8259A's -> intpin 0 MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level ioapic0: intpin 9 polarity: low ioapic0 irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 wlan: <802.11 Link Layer> random: nfslock: pseudo-device kbd: new array size 4 kbd1 at kbdmux0 mem: io: null: hpt27xx: RocketRAID 27xx controller driver v1.0 hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 acpi0: <082812 XSDT1355> on motherboard PCIe: Memory Mapped configuration base @ 0xe0000000 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48 acpi0: [MPSAFE] acpi0: [ITHREAD] ACPI: Executed 3 blocks of module-level executable AML code acpi0: Power Button (fixed) acpi0: reservation of fee00000, 1000 (3) failed acpi0: reservation of ffb80000, 80000 (3) failed acpi0: reservation of fec10000, 20 (3) failed acpi0: reservation of fed40000, 5000 (3) failed acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, cfe00000 (3) failed ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: Processor \\_PR_.P001 (ACPI ID 1) -> APIC ID 0 cpu0: on acpi0 cpu0: switching to generic Cx mode cpu1: Processor \\_PR_.P002 (ACPI ID 2) -> APIC ID 1 cpu1: on acpi0 cpu2: Processor \\_PR_.P003 (ACPI ID 3) -> APIC ID 2 cpu2: on acpi0 cpu3: Processor \\_PR_.P004 (ACPI ID 4) -> APIC ID 3 cpu3: on acpi0 ACPI: Processor \\_PR_.P005 (ACPI ID 5) ignored ACPI: Processor \\_PR_.P006 (ACPI ID 6) ignored ACPI: Processor \\_PR_.P007 (ACPI ID 7) ignored ACPI: Processor \\_PR_.P008 (ACPI ID 8) ignored pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 4 7 10 11 12 14 15 Validation 0 11 N 0 4 7 10 11 12 14 15 After Disable 0 255 N 0 4 7 10 11 12 14 15 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 4 7 10 11 12 14 15 Validation 0 10 N 0 4 7 10 11 12 14 15 After Disable 0 255 N 0 4 7 10 11 12 14 15 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 4 7 10 11 12 14 15 Validation 0 10 N 0 4 7 10 11 12 14 15 After Disable 0 255 N 0 4 7 10 11 12 14 15 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 4 7 10 11 12 14 15 Validation 0 10 N 0 4 7 10 11 12 14 15 After Disable 0 255 N 0 4 7 10 11 12 14 15 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 4 7 10 11 12 14 15 Validation 0 255 N 0 4 7 10 11 12 14 15 After Disable 0 255 N 0 4 7 10 11 12 14 15 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 4 7 10 11 12 14 15 Validation 0 255 N 0 4 7 10 11 12 14 15 After Disable 0 255 N 0 4 7 10 11 12 14 15 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 4 7 10 12 14 15 Validation 0 10 N 0 4 7 10 12 14 15 After Disable 0 255 N 0 4 7 10 12 14 15 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 4 7 10 11 12 14 15 Validation 0 255 N 0 4 7 10 11 12 14 15 After Disable 0 255 N 0 4 7 10 11 12 14 15 acpi_hpet0: iomem 0xfed00000-0xfed003ff on acpi0 acpi_hpet0: vend: 0x4353 rev: 0x1 num: 3 hz: 14318180 opts: legacy_route Timecounter "HPET" frequency 14318180 Hz quality 900 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x1022, dev=0x9600, revid=0x00 domain=0, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2230, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x9603, revid=0x00 domain=0, bus=0, slot=2, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x4010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x1b (6750 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 3 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.2.INTA pcib0: slot 2 INTA hardwired to IRQ 18 found-> vendor=0x1022, dev=0x9604, revid=0x00 domain=0, bus=0, slot=4, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 3 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.4.INTA pcib0: slot 4 INTA hardwired to IRQ 16 found-> vendor=0x1022, dev=0x9607, revid=0x00 domain=0, bus=0, slot=7, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0106, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 3 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.7.INTA pcib0: slot 7 INTA hardwired to IRQ 19 found-> vendor=0x1002, dev=0x4391, revid=0x00 domain=0, bus=0, slot=17, func=0 class=01-06-01, hdrtype=0x00, mfdev=0 cmdreg=0x0107, statreg=0x0230, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0xc000, size 3, enabled map[14]: type I/O Port, range 32, base 0xb000, size 2, enabled map[18]: type I/O Port, range 32, base 0xa000, size 3, enabled map[1c]: type I/O Port, range 32, base 0x9000, size 2, enabled map[20]: type I/O Port, range 32, base 0x8000, size 4, enabled map[24]: type Memory, range 32, base 0xfe9ffc00, size 10, enabled pcib0: matched entry for 0.17.INTA pcib0: slot 17 INTA hardwired to IRQ 22 found-> vendor=0x1002, dev=0x4397, revid=0x00 domain=0, bus=0, slot=18, func=0 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0102, statreg=0x02a0, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[10]: type Memory, range 32, base 0xfe9fe000, size 12, enabled pcib0: matched entry for 0.18.INTA pcib0: slot 18 INTA hardwired to IRQ 16 unknown: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe9fe000 found-> vendor=0x1002, dev=0x4398, revid=0x00 domain=0, bus=0, slot=18, func=1 class=0c-03-10, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[10]: type Memory, range 32, base 0xfe9fd000, size 12, enabled pcib0: matched entry for 0.18.INTA pcib0: slot 18 INTA hardwired to IRQ 16 unknown: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe9fd000 found-> vendor=0x1002, dev=0x4396, revid=0x00 domain=0, bus=0, slot=18, func=2 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0102, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xfe9ff800, size 8, enabled pcib0: matched entry for 0.18.INTB pcib0: slot 18 INTB hardwired to IRQ 17 unknown: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfe9ff800 found-> vendor=0x1002, dev=0x4397, revid=0x00 domain=0, bus=0, slot=19, func=0 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0102, statreg=0x02a0, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 map[10]: type Memory, range 32, base 0xfe9fc000, size 12, enabled pcib0: matched entry for 0.19.INTA pcib0: slot 19 INTA hardwired to IRQ 18 unknown: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe9fc000 found-> vendor=0x1002, dev=0x4398, revid=0x00 domain=0, bus=0, slot=19, func=1 class=0c-03-10, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 map[10]: type Memory, range 32, base 0xfe9fb000, size 12, enabled pcib0: matched entry for 0.19.INTA pcib0: slot 19 INTA hardwired to IRQ 18 unknown: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe9fb000 found-> vendor=0x1002, dev=0x4396, revid=0x00 domain=0, bus=0, slot=19, func=2 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0102, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xfe9ff400, size 8, enabled pcib0: matched entry for 0.19.INTB pcib0: slot 19 INTB hardwired to IRQ 19 unknown: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfe9ff400 found-> vendor=0x1002, dev=0x4385, revid=0x3c domain=0, bus=0, slot=20, func=0 class=0c-05-00, hdrtype=0x00, mfdev=1 cmdreg=0x0403, statreg=0xd230, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1002, dev=0x439c, revid=0x00 domain=0, bus=0, slot=20, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0230, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 MSI supports 1 message map[20]: type I/O Port, range 32, base 0xff00, size 4, enabled found-> vendor=0x1002, dev=0x4383, revid=0x00 domain=0, bus=0, slot=20, func=2 class=04-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0410, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 64, base 0xfe9f4000, size 14, enabled pcib0: matched entry for 0.20.INTA pcib0: slot 20 INTA hardwired to IRQ 16 found-> vendor=0x1002, dev=0x439d, revid=0x00 domain=0, bus=0, slot=20, func=3 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x0220, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1002, dev=0x4384, revid=0x00 domain=0, bus=0, slot=20, func=4 class=06-04-01, hdrtype=0x01, mfdev=1 cmdreg=0x0105, statreg=0x02a0, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) found-> vendor=0x1002, dev=0x4399, revid=0x00 domain=0, bus=0, slot=20, func=5 class=0c-03-10, hdrtype=0x00, mfdev=0 cmdreg=0x0102, statreg=0x02a0, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=10 map[10]: type Memory, range 32, base 0xfe9fa000, size 12, enabled pcib0: matched entry for 0.20.INTC pcib0: slot 20 INTC hardwired to IRQ 18 unknown: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe9fa000 found-> vendor=0x1022, dev=0x1200, revid=0x00 domain=0, bus=0, slot=24, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1201, revid=0x00 domain=0, bus=0, slot=24, func=1 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1202, revid=0x00 domain=0, bus=0, slot=24, func=2 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1203, revid=0x00 domain=0, bus=0, slot=24, func=3 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1204, revid=0x00 domain=0, bus=0, slot=24, func=4 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) pcib1: irq 18 at device 2.0 on pci0 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xd000-0xdfff pcib1: memory decode 0xfea00000-0xfeafffff pcib1: prefetched decode 0xd0000000-0xdfffffff pci1: on pcib1 pci1: domain=0, physical bus=1 found-> vendor=0x1002, dev=0x68f9, revid=0x00 domain=0, bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0107, statreg=0x4010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 3 supports D0 D1 D2 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Prefetchable Memory, range 64, base 0xd0000000, size 28, enabled pcib1: requested memory range 0xd0000000-0xdfffffff: good map[18]: type Memory, range 64, base 0xfeac0000, size 17, enabled pcib1: requested memory range 0xfeac0000-0xfeadffff: good map[20]: type I/O Port, range 32, base 0xd000, size 8, enabled pcib1: requested I/O range 0xd000-0xd0ff: in range pcib1: matched entry for 1.0.INTA pcib1: slot 0 INTA hardwired to IRQ 18 found-> vendor=0x1002, dev=0xaa68, revid=0x00 domain=0, bus=1, slot=0, func=1 class=04-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0107, statreg=0x4010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 powerspec 3 supports D0 D1 D2 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 64, base 0xfeaf8000, size 14, enabled pcib1: requested memory range 0xfeaf8000-0xfeafbfff: good pcib1: matched entry for 1.0.INTB pcib1: slot 0 INTB hardwired to IRQ 19 vgapci0: port 0xd000-0xd0ff mem 0xd0000000-0xdfffffff,0xfeac0000-0xfeadffff irq 18 at device 0.0 on pci1 pci1: at device 0.1 (no driver attached) pcib2: irq 16 at device 4.0 on pci0 pcib2: domain 0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0xe000-0xefff pcib2: prefetched decode 0xfdf00000-0xfdffffff pci2: on pcib2 pci2: domain=0, physical bus=2 found-> vendor=0x10ec, dev=0x8168, revid=0x06 domain=0, bus=2, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 3 supports D0 D1 D2 D3 current D0 MSI supports 1 message, 64 bit MSI-X supports 4 messages in map 0x20 map[10]: type I/O Port, range 32, base 0xe800, size 8, enabled pcib2: requested I/O range 0xe800-0xe8ff: in range map[18]: type Prefetchable Memory, range 64, base 0xfdfff000, size 12, enabled pcib2: requested memory range 0xfdfff000-0xfdffffff: good map[20]: type Prefetchable Memory, range 64, base 0xfdff8000, size 14, enabled pcib2: requested memory range 0xfdff8000-0xfdffbfff: good pcib2: matched entry for 2.0.INTA pcib2: slot 0 INTA hardwired to IRQ 16 re0: port 0xe800-0xe8ff mem 0xfdfff000-0xfdffffff,0xfdff8000-0xfdffbfff irq 16 at device 0.0 on pci2 re0: Reserved 0x1000 bytes for rid 0x18 type 3 at 0xfdfff000 re0: MSI count : 1 re0: MSI-X count : 4 re0: Reserved 0x4000 bytes for rid 0x20 type 3 at 0xfdff8000 re0: attempting to allocate 1 MSI-X vectors (4 supported) msi: routing MSI-X IRQ 256 to local APIC 0 vector 49 re0: using IRQ 256 for MSI-X re0: Using 1 MSI-X message re0: Chip rev. 0x2c800000 re0: MAC rev. 0x00000000 miibus0: on re0 rgephy0: PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: bpf attached re0: Ethernet address: 50:46:5d:8b:a2:ea re0: [MPSAFE] re0: [ITHREAD] pcib3: irq 19 at device 7.0 on pci0 pcib3: domain 0 pcib3: secondary bus 3 pcib3: subordinate bus 3 pcib3: memory decode 0xfeb00000-0xfebfffff pcib3: no prefetched decode pci3: on pcib3 pci3: domain=0, physical bus=3 found-> vendor=0x1b21, dev=0x1042, revid=0x00 domain=0, bus=3, slot=0, func=0 class=0c-03-30, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 3 supports D0 D3 current D0 MSI supports 8 messages, 64 bit MSI-X supports 8 messages in map 0x10 map[10]: type Memory, range 64, base 0xfebf8000, size 15, enabled pcib3: requested memory range 0xfebf8000-0xfebfffff: good pcib3: matched entry for 3.0.INTA pcib3: slot 0 INTA hardwired to IRQ 19 pci3: at device 0.0 (no driver attached) ahci0: port 0xc000-0xc007,0xb000-0xb003,0xa000-0xa007,0x9000-0x9003,0x8000-0x800f mem 0xfe9ffc00-0xfe9fffff irq 22 at device 17.0 on pci0 ahci0: Reserved 0x400 bytes for rid 0x24 type 3 at 0xfe9ffc00 ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 0 vector 50 ahci0: [MPSAFE] ahci0: [ITHREAD] ahci0: AHCI v1.10 with 6 3Gbps ports, Port Multiplier supported ahci0: Caps: 64bit NCQ SNTF MPS ALP AL CLO 3Gbps PM PMD SSC PSC 32cmd CCC 6ports ahcich0: at channel 0 on ahci0 ahcich0: [MPSAFE] ahcich0: [ITHREAD] ahcich0: Caps: ahcich1: at channel 1 on ahci0 ahcich1: [MPSAFE] ahcich1: [ITHREAD] ahcich1: Caps: ahcich2: at channel 2 on ahci0 ahcich2: [MPSAFE] ahcich2: [ITHREAD] ahcich2: Caps: ahcich3: at channel 3 on ahci0 ahcich3: [MPSAFE] ahcich3: [ITHREAD] ahcich3: Caps: ahcich4: at channel 4 on ahci0 ahcich4: [MPSAFE] ahcich4: [ITHREAD] ahcich4: Caps: ahcich5: at channel 5 on ahci0 ahcich5: [MPSAFE] ahcich5: [ITHREAD] ahcich5: Caps: ohci0: mem 0xfe9fe000-0xfe9fefff irq 16 at device 18.0 on pci0 ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 51 ohci0: [MPSAFE] ohci0: [ITHREAD] usbus0 on ohci0 usbus0: bpf attached ohci0: usbpf: Attached ohci1: mem 0xfe9fd000-0xfe9fdfff irq 16 at device 18.1 on pci0 ohci1: [MPSAFE] ohci1: [ITHREAD] usbus1 on ohci1 usbus1: bpf attached ohci1: usbpf: Attached ehci0: mem 0xfe9ff800-0xfe9ff8ff irq 17 at device 18.2 on pci0 ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 0 vector 52 ehci0: [MPSAFE] ehci0: [ITHREAD] ehci0: Dropped interrupts workaround enabled usbus2: EHCI version 1.0 usbus2 on ehci0 usbus2: bpf attached ehci0: usbpf: Attached ohci2: mem 0xfe9fc000-0xfe9fcfff irq 18 at device 19.0 on pci0 ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 53 ohci2: [MPSAFE] ohci2: [ITHREAD] usbus3 on ohci2 usbus3: bpf attached ohci2: usbpf: Attached ohci3: mem 0xfe9fb000-0xfe9fbfff irq 18 at device 19.1 on pci0 ohci3: [MPSAFE] ohci3: [ITHREAD] usbus4 on ohci3 usbus4: bpf attached ohci3: usbpf: Attached ehci1: mem 0xfe9ff400-0xfe9ff4ff irq 19 at device 19.2 on pci0 ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 54 ehci1: [MPSAFE] ehci1: [ITHREAD] ehci1: Dropped interrupts workaround enabled usbus5: EHCI version 1.0 usbus5 on ehci1 usbus5: bpf attached ehci1: usbpf: Attached pci0: at device 20.0 (no driver attached) atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xff00 atapci0: SATA controller enabled (secondary channel) ata0: at channel 0 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata0: stat1=0x00 err=0x04 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=00 stat1=00 devices=0x10000 ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 55 ata0: [MPSAFE] ata0: [ITHREAD] pci0: at device 20.2 (no driver attached) isab0: at device 20.3 on pci0 isa0: on isab0 pcib4: at device 20.4 on pci0 pcib4: domain 0 pcib4: secondary bus 4 pcib4: subordinate bus 4 pcib4: no prefetched decode pcib4: Subtractively decoded bridge. pci4: on pcib4 pci4: domain=0, physical bus=4 ohci4: mem 0xfe9fa000-0xfe9fafff irq 18 at device 20.5 on pci0 ohci4: [MPSAFE] ohci4: [ITHREAD] usbus6 on ohci4 usbus6: bpf attached ohci4: usbpf: Attached acpi_button0: on acpi0 atrtc0: port 0x70-0x71 irq 8 on acpi0 atrtc0: registered as a time-of-day clock (resolution 1000000us) ppc0: using extended I/O port range ppc0: SPP ppc0: port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ioapic0: routing intpin 7 (ISA IRQ 7) to lapic 0 vector 56 ppc0: [MPSAFE] ppc0: [ITHREAD] ppbus0: on ppc0 lpt0: on ppbus0 lpt0: [MPSAFE] lpt0: [ITHREAD] lpt0: Interrupt-driven port ppi0: on ppbus0 plip0: on ppbus0 plip0: bpf attached plip0: [MPSAFE] plip0: [ITHREAD] acpi_hpet1: iomem 0xfed00000-0xfed003ff on acpi0 device_attach: acpi_hpet1 attach returned 12 atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 57 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: unable to allocate IRQ psmcpnp0: irq 12 on acpi0 psm0: current command byte:0065 psm0: irq 12 on atkbdc0 ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 0 vector 58 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model IntelliMouse Explorer, device ID 4-00, 5 buttons psm0: config:00000000, flags:00000008, packet size:4 psm0: syncmask:08, syncbits:00 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 59 uart0: [FILTER] uart0: fast interrupt acpi0: wakeup code va 0xffffff8906783000 pa 0x4000 ex_isa_identify() ahc_isa_probe 0: ioport 0xc00 alloc failed ahc_isa_probe 1: ioport 0x1c00 alloc failed ahc_isa_probe 2: ioport 0x2c00 alloc failed ahc_isa_probe 3: ioport 0x3c00 alloc failed ahc_isa_probe 4: ioport 0x4c00 alloc failed ahc_isa_probe 5: ioport 0x5c00 alloc failed ahc_isa_probe 6: ioport 0x6c00 alloc failed ahc_isa_probe 7: ioport 0x7c00 alloc failed ahc_isa_probe 8: ioport 0x8c00 alloc failed ahc_isa_probe 9: ioport 0x9c00 alloc failed ahc_isa_probe 10: ioport 0xac00 alloc failed ahc_isa_probe 11: ioport 0xbc00 alloc failed ahc_isa_probe 12: ioport 0xcc00 alloc failed ahc_isa_probe 13: ioport 0xdc00 alloc failed ahc_isa_probe 14: ioport 0xec00 alloc failed isa_probe_children: disabling PnP devices atkbdc: atkbdc0 already exists; skipping it atrtc: atrtc0 already exists; skipping it ppc: ppc0 already exists; skipping it sc: sc0 already exists; skipping it uart: uart0 already exists; skipping it isa_probe_children: probing non-PnP devices orm0: at iomem 0xc0000-0xcffff on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: scteken (teken terminal) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 uart1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 wbwd0 failed to probe on isa0 isa_probe_children: probing PnP devices acpi_throttle0: on cpu0 acpi_throttle0: P_CNT from P_BLK 0x810 hwpstate0: on cpu0 Device configuration finished. procfs registered lapic: Divisor 2, Frequency 100451708 Hz Timecounter "TSC" frequency 3415357881 Hz quality -100 Timecounters tick every 1.000 msec vlan: initialized, using hash tables with chaining lo0: bpf attached hpt27xx: no controller detected. hptrr: no controller detected. ata0: Identifying devices: 00010000 ata0: New devices: 00010000 usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 480Mbps High Speed USB v2.0 usbus3: 12Mbps Full Speed USB v1.0 usbus4: 12Mbps Full Speed USB v1.0 usbus5: 480Mbps High Speed USB v2.0 usbus6: 12Mbps Full Speed USB v1.0 ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA66 cable=80 wire acd0: setting UDMA66 acd0: DVDR drive at ata0 as master acd0: read 8268KB/s (8268KB/s) write 8268KB/s (8268KB/s), 2048KB buffer, UDMA66 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet acd0: Writes: CDR, CDRW, DVDR, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc ahcich0: AHCI reset... ahcich0: SATA connect time=100us status=00000123 ahcich0: AHCI reset: device found ahcich0: AHCI reset: device ready after 0ms ahcich1: AHCI reset... ahcich1: SATA connect time=100us status=00000123 ahcich1: AHCI reset: device found ahcich2: AHCI reset... ugen0.1: at usbus0 uhub0: on usbus0 ugen1.1: at usbus1 uhub1: on usbus1 ugen2.1: at usbus2 uhub2: on usbus2 ugen3.1: at usbus3 uhub3: on usbus3 ugen4.1: at usbus4 uhub4: on usbus4 ugen5.1: at usbus5 uhub5: on usbus5 ugen6.1: at usbus6 uhub6: on usbus6 ahcich2: SATA connect timeout time=10000us status=00000000 ahcich2: AHCI reset: device not found ahcich3: AHCI reset... ahcich3: SATA connect timeout time=10000us status=00000000 ahcich3: AHCI reset: device not found ahcich4: AHCI reset... ahcich4: SATA connect timeout time=10000us status=00000000 ahcich4: AHCI reset: device not found ahcich5: AHCI reset... ahcich5: SATA connect timeout time=10000us status=00000000 ahcich5: AHCI reset: device not found ahcich1: AHCI reset: device ready after 100ms ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: ATA-8 SATA 3.x device ada0: Serial Number 130740403862 ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes) ada0: Command Queueing enabled ada0: 122104MB (250069680 512 byte sectors: 16H 63S/T 16383C) GEOM: new disk ada0 ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 ada1: ATA-9 SATA 3.x device ada1: Serial Number Z1D58E0Y ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada1: Command Queueing enabled ada1: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C) pass0 at ahcich0 bus 0 scbus0 target 0 lun 0 pass0: ATA-8 SATA 3.x device pass0: Serial Number 130740403862 pass0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes) pass0: Command Queueing enabled pass1 at ahcich1 bus 0 scbus1 target 0 lun 0 pass1: ATA-9 SATA 3.x device pass1: Serial Number Z1D58E0Y pass1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) pass1: Command Queueing enabled ATA PseudoRAID loaded SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 SMP: AP CPU #3 Launched! cpu3 AP: ID: 0x03000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 SMP: AP CPU #2 Launched! cpu2 AP: ID: 0x02000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 1 vector 48 ioapic0: routing intpin 7 (ISA IRQ 7) to lapic 2 vector 48 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 3 vector 48 ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 1 vector 49 ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 2 vector 49 ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 3 vector 49 ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 1 vector 50 ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 2 vector 50 msi: Assigning MSI-X IRQ 256 to local APIC 3 vector 50 GEOM: new disk ada1 uhub6: 2 ports with 2 removable, self powered Root mount waiting for: usbus5 usbus4 usbus3 usbus2 usbus1 usbus0 uhub0: 3 ports with 3 removable, self powered uhub1: 3 ports with 3 removable, self powered uhub3: 3 ports with 3 removable, self powered uhub4: 3 ports with 3 removable, self powered Root mount waiting for: usbus5 usbus2 Root mount waiting for: usbus5 usbus2 uhub2: 6 ports with 6 removable, self powered uhub5: 6 ports with 6 removable, self powered Trying to mount root from ufs:/dev/ada0p4 start_init: trying /sbin/init re0: link state changed to UP