Copyright (c) 1992-2020 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.4-STABLE #3 r362432: Sat Jun 20 12:51:06 CEST 2020
    root@kg-core1.kg4.no:/zs/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 10.0.0 (git@github.com:llvm/llvm-project.git llvmorg-10.0.0-0-gd32170dbd5b)
VT(vga): resolution 640x480
CPU: AMD Phenom(tm) II X4 965 Processor (3415.41-MHz K8-class CPU)
  Origin="AuthenticAMD"  Id=0x100f43  Family=0x10  Model=0x4  Stepping=3
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x802009<SSE3,MON,CX16,POPCNT>
  AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!>
  AMD Features2=0x837ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,NodeId>
  SVM: NP,NRIP,NAsids=64
  TSC: P-state invariant
real memory  = 34359738368 (32768 MB)
avail memory = 33308622848 (31765 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <042713 APIC1118>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20171214/tbfadt-796)
Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20171214/tbfadt-748)
ioapic0 <Version 2.1> irqs 0-23 on motherboard
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #1 Launched!
Timecounter "TSC-low" frequency 1707704393 Hz quality 800
random: entropy device external interface
kbd1 at kbdmux0
000.000030 [4213] netmap_init               netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff80ff2190, 0) error 19
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <042713 XSDT1118> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 450
Event timer "HPET2" frequency 14318180 Hz quality 450
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 18 at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xd000-0xd0ff mem 0xd0000000-0xdfffffff,0xfeac0000-0xfeadffff irq 18 at device 0.0 on pci1
vgapci0: Boot video device
hdac0: <ATI RV910 HDA Controller> mem 0xfeaf8000-0xfeafbfff irq 19 at device 0.1 on pci1
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0
pci2: <ACPI PCI bus> on pcib2
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe800-0xe8ff mem 0xfdfff000-0xfdffffff,0xfdff8000-0xfdffbfff irq 16 at device 0.0 on pci2
re0: Using 1 MSI-X message
re0: Chip rev. 0x2c800000
re0: MAC rev. 0x00100000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: 50:46:5d:8b:a2:ea
re0: netmap queues/slots: TX 1/256, RX 1/256
pcib3: <ACPI PCI-PCI bridge> irq 19 at device 7.0 on pci0
pci3: <ACPI PCI bus> on pcib3
xhci0: <ASMedia ASM1042 USB 3.0 controller> mem 0xfebf8000-0xfebfffff irq 19 at device 0.0 on pci3
xhci0: 32 bytes context size, 32-bit DMA
xhci0: Unable to map MSI-X table 
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
ahci0: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0xc000-0xc007,0xb000-0xb003,0xa000-0xa007,0x9000-0x9003,0x8000-0x800f mem 0xfe9ffc00-0xfe9fffff irq 22 at device 17.0 on pci0
ahci0: AHCI v1.10 with 6 3Gbps ports, Port Multiplier supported
ahci0: quirks=0x22000<ATI_PMP_BUG,1MSI>
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe9fe000-0xfe9fefff irq 16 at device 18.0 on pci0
usbus1 on ohci0
usbus1: 12Mbps Full Speed USB v1.0
ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe9fd000-0xfe9fdfff irq 16 at device 18.1 on pci0
usbus2 on ohci1
usbus2: 12Mbps Full Speed USB v1.0
ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe9ff800-0xfe9ff8ff irq 17 at device 18.2 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci0
usbus3: 480Mbps High Speed USB v2.0
ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe9fc000-0xfe9fcfff irq 18 at device 19.0 on pci0
usbus4 on ohci2
usbus4: 12Mbps Full Speed USB v1.0
ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe9fb000-0xfe9fbfff irq 18 at device 19.1 on pci0
usbus5 on ohci3
usbus5: 12Mbps Full Speed USB v1.0
ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe9ff400-0xfe9ff4ff irq 19 at device 19.2 on pci0
usbus6: EHCI version 1.0
usbus6 on ehci1
usbus6: 480Mbps High Speed USB v2.0
atapci0: <ATI IXP700/800 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
hdac1: <ATI SB600 HDA Controller> mem 0xfe9f4000-0xfe9f7fff irq 16 at device 20.2 on pci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci4: <ACPI PCI bus> on pcib4
ohci4: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe9fa000-0xfe9fafff irq 18 at device 20.5 on pci0
usbus7 on ohci4
usbus7: 12Mbps Full Speed USB v1.0
acpi_button0: <Power Button> on acpi0
ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
aibs0: <ASUSTeK AI Booster (ACPI ASOC ATK0110)> on acpi0
aibs0: v0: 0x06020000        Vcore Voltage   850 /  1600
aibs0: v1: 0x06020001         +3.3 Voltage  2970 /  3630
aibs0: v2: 0x06020002           +5 Voltage  4500 /  5500
aibs0: v3: 0x06020003          +12 Voltage 10200 / 13800
aibs0: t0: 0x06030000      CPU Temperature   600 /   950
aibs0: t1: 0x06030001       MB Temperature   450 /   750
aibs0: f0: 0x06040000        CPU FAN Speed   600 /  7200
aibs0: f1: 0x06040001    CHASSIS FAN Speed   600 /  7200
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse Explorer, device ID 4
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff on isa0
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
fuse-freebsd: version 0.4.4, FUSE ABI 7.8
Timecounters tick every 1.000 msec
hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0
hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0
pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0
hdacc1: <Realtek ALC887 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC887 Audio Function Group> at nid 1 on hdacc1
pcm1: <Realtek ALC887 (Rear Analog)> at nid 20 and 24,26 on hdaa1
pcm2: <Realtek ALC887 (Front Analog)> at nid 27 and 25 on hdaa1
pcm3: <Realtek ALC887 (Onboard Digital)> at nid 17 on hdaa1
ugen0.1: <0x1b21 XHCI root HUB> at usbus0
ugen1.1: <ATI OHCI root HUB> at usbus1
ugen6.1: <ATI EHCI root HUB> at usbus6
ugen3.1: <ATI EHCI root HUB> at usbus3
uhub0: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub2: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6
uhub1: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen7.1: <ATI OHCI root HUB> at usbus7
uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus7
ugen5.1: <ATI OHCI root HUB> at usbus5
ugen4.1: <ATI OHCI root HUB> at usbus4
ugen2.1: <ATI OHCI root HUB> at usbus2
uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
uhub6: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
uhub7: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
cd0 at ata0 bus 0 scbus6 target 0 lun 0
ada0: cd0: <SanDisk SDSSDH2128G X211200> ATA8-ACS SATA 3.x device
<Optiarc DVD RW AD-5170A 1.12> Removable CD-ROM SCSI device
ada0: Serial Number 130740403862
cd0: 66.700MB/s transfersada0: 300.000MB/s transfers ( (UDMA4, SATA 2.x, ATAPI 12bytes, UDMA6, PIO 65534bytesPIO 512bytes)
ada0: Command Queueing enabled
)ada0: 122104MB (250069680 512 byte sectors)

ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
cd0: Attempt to query device size failed: NOT READY, Medium not present
ada1: <ST1000DM003-1CH162 CC47> ACS-2 ATA SATA 3.x device
ada1: Serial Number Z1D58E0Y
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 953869MB (1953525168 512 byte sectors)
ada1: quirks=0x1<4K>
ada2 at ahcich2 bus 0 scbus2 target 0 lun 0
ada2: <Crucial CT240M500SSD1 MU03> ACS-2 ATA SATA 3.x device
ada2: Serial Number 13430954ED69
ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 228936MB (468862128 512 byte sectors)
ada2: quirks=0x2<NCQ_TRIM_BROKEN>
Trying to mount root from ufs:/dev/ada2p4 [rw]...
uhub4: 2 ports with 2 removable, self powered
uhub7: 3 ports with 3 removable, self powered
uhub5: 3 ports with 3 removable, self powered
uhub6: 3 ports with 3 removable, self powered
uhub3: 3 ports with 3 removable, self powered
random: unblocking device.
uhub0: 4 ports with 4 removable, self powered
WARNING: /zs was not properly dismounted
lo0: link state changed to UP
re0: link state changed to DOWN
ugen0.2: <vendor 0x05e3 USB2.0 Hub> at usbus0
uhub8 on uhub0
uhub8: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/32.98, addr 1> on usbus0
uhub8: 4 ports with 4 removable, self powered
ugen0.3: <vendor 0x05e3 USB2.0 Hub> at usbus0
uhub9 on uhub8
uhub9: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/32.98, addr 2> on usbus0
uhub2: 6 ports with 6 removable, self powered
uhub1: 6 ports with 6 removable, self powered
uhub9: 4 ports with 4 removable, self powered
re0: link state changed to UP
bridge0: Ethernet address: 02:0f:63:85:5b:00
bridge0: changing name to 'vm-public'
re0: promiscuous mode enabled
vm-public: link state changed to UP