Copyright (c) 1992-2011 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-CURRENT #119 r217462M: Sat Jan 15 16:05:38 CST 2011
    root@comporellon.tachypleus.net:/usr/obj/powerpc.powerpc/usr/src/sys/GENERIC powerpc
WARNING: WITNESS option enabled, expect reduced performance.
Preloaded elf kernel "/boot/kernel/kernel" at 0xb2b000.
cpu0: IBM PowerPC 970MP revision 1.1, 18446744071915.20 MHz
cpu0: Features dc000000<PPC32,PPC64,ALTIVEC,FPU,MMU>
cpu0: HID0 1511081<DEEPNAP,NAP,DPM,NHR,TBEN,ENATTN>
real memory  = 2125881344 (2027 MB)
available KVA = 490659839 (467 MB)
Physical memory chunk(s):
0x00018000 - 0x000fffff, 950272 bytes (232 pages)
0x00c3a000 - 0x017fffff, 12345344 bytes (3014 pages)
0x01813000 - 0x01bfffff, 4116480 bytes (1005 pages)
0x01c3c000 - 0x01ffffff, 3948544 bytes (964 pages)
0x04f00000 - 0x7c9f6fff, 2007986176 bytes (490231 pages)
avail memory = 2026475520 (1932 MB)
ULE: setup cpu 0
firmware: 'isp_1040' version 1: 22944 bytes loaded at 0x643958
ispfw: registered firmware <isp_1040>
firmware: 'isp_1040_it' version 1: 32942 bytes loaded at 0x6492f8
ispfw: registered firmware <isp_1040_it>
firmware: 'isp_1080' version 1: 31350 bytes loaded at 0x6513a6
ispfw: registered firmware <isp_1080>
firmware: 'isp_1080_it' version 1: 40644 bytes loaded at 0x658e1c
ispfw: registered firmware <isp_1080_it>
firmware: 'isp_12160' version 1: 28050 bytes loaded at 0x662ce0
ispfw: registered firmware <isp_12160>
firmware: 'isp_12160_it' version 1: 40604 bytes loaded at 0x669a72
ispfw: registered firmware <isp_12160_it>
firmware: 'isp_2100' version 1: 76770 bytes loaded at 0x67390e
ispfw: registered firmware <isp_2100>
firmware: 'isp_2200' version 1: 77214 bytes loaded at 0x6864f0
ispfw: registered firmware <isp_2200>
firmware: 'isp_2300' version 1: 106640 bytes loaded at 0x69928e
ispfw: registered firmware <isp_2300>
firmware: 'isp_2322' version 1: 120466 bytes loaded at 0x6b331e
ispfw: registered firmware <isp_2322>
firmware: 'isp_2400' version 1: 178924 bytes loaded at 0x6d4518
ispfw: registered firmware <isp_2400>
firmware: 'isp_2400_multi' version 1: 195276 bytes loaded at 0x70cf5c
ispfw: registered firmware <isp_2400_multi>
firmware: 'isp_2500' version 1: 141884 bytes loaded at 0x74a458
ispfw: registered firmware <isp_2500>
firmware: 'isp_2500_multi' version 1: 166508 bytes loaded at 0x77bfac
ispfw: registered firmware <isp_2500_multi>
nfslock: pseudo-device
kbd0 at kbdmux0
mem: <memory>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
openfirm: <Open Firmware control device>
nexus0: <Open Firmware Nexus device>
cpulist0: <Open Firmware CPU Group> on nexus0
cpu0: <Open Firmware CPU> on cpulist0
pcr0: <PPC 970 Power Control Register> on cpu0
cpu1: <Open Firmware CPU> on cpulist0
pcr1: <PPC 970 Power Control Register> on cpu1
cpu2: <Open Firmware CPU> on cpulist0
pcr2: <PPC 970 Power Control Register> on cpu2
cpu3: <Open Firmware CPU> on cpulist0
pcr3: <PPC 970 Power Control Register> on cpu3
sc1: no video adapter found.
nexus0: <chosen>, type (unknown) (no driver attached)
sc1: no video adapter found.
nexus0: <memory>, type memory (no driver attached)
sc1: no video adapter found.
nexus0: <openprom>, type BootROM (no driver attached)
sc1: no video adapter found.
nexus0: <rom>, type (unknown) (no driver attached)
sc1: no video adapter found.
nexus0: <options>, type (unknown) (no driver attached)
sc1: no video adapter found.
nexus0: <packages>, type (unknown) (no driver attached)
sc1: no video adapter found.
nexus0: <firewire-disk-mode>, type (unknown) (no driver attached)
sc1: no video adapter found.
nexus0: <pseudo-hid>, type (unknown) (no driver attached)
sc1: no video adapter found.
nexus0: <multiboot>, type (unknown) (no driver attached)
sc1: no video adapter found.
nexus0: <diagnostics>, type (unknown) (no driver attached)
sc1: no video adapter found.
nexus0: <xmodem>, type (unknown) (no driver attached)
sc1: no video adapter found.
nexus0: <nvram>, type nvram (no driver attached)
sc1: no video adapter found.
unin0: <Apple UniNorth System Controller> on nexus0
unin0: Version 66
iichb0: <Keywest I2C controller> mem 0xf8001000-0xf8001fff irq 0 on unin0
unin mapdev: start f8001000, len 4095
iichb0: Revision: A2
iicbus0: <OFW I2C bus> on iichb0
ds17750: <Temp-Monitor DS1775> at addr 0x94 on iicbus0
iicbus0: <unknown card> at addr 0x96
max66900: <Temp-Monitor MAX6690> at addr 0x98 on iicbus0
max66901: <Temp-Monitor MAX6690> at addr 0x9c on iicbus0
unin0: <dart, dart> mem 0xf8033000-0xf803bfff (no driver attached)
htpic0: <OpenPIC Interrupt Controller> mem 0xf8040000-0xf807ffff on unin0
unin mapdev: start f8040000, len 262143
htpic0: Version 1.2, supports 4 CPUs and 124 irqs
sc1: no video adapter found.
pcib0: <IBM CPC945 PCI Express Root> on nexus0
pci0: <OFW PCI bus> on pcib0
pci0: domain=0, physical bus=10
found->	vendor=0x10de, dev=0x0141, revid=0xa2
	domain=0, bus=10, slot=0, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=0
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type Memory, range 32, base 0xa1000000, size 24, enabled
	map[14]: type Prefetchable Memory, range 64, base 0x90000000, size 28, enabled
	map[1c]: type Memory, range 64, base 0xa0000000, size 24, enabled
vgapci0: <VGA-compatible display> mem 0xa1000000-0xa1ffffff,0x90000000-0x9fffffff,0xa0000000-0xa0ffffff irq 3 at device 0.0 on pci0
sc1: no video adapter found.
pcib1: <IBM CPC9X5 HyperTransport Tunnel> on nexus0
pcib1: 86 HT IRQs on device 7.0
pci1: <OFW PCI bus> on pcib1
pci1: domain=1, physical bus=0
found->	vendor=0x1166, dev=0x0130, revid=0xa3
	domain=1, bus=0, slot=1, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x02 (500 ns)
found->	vendor=0x1166, dev=0x0130, revid=0xa3
	domain=1, bus=0, slot=2, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x02 (500 ns)
found->	vendor=0x1166, dev=0x0132, revid=0xa3
	domain=1, bus=0, slot=3, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1166, dev=0x0132, revid=0xa3
	domain=1, bus=0, slot=4, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1166, dev=0x0132, revid=0xa3
	domain=1, bus=0, slot=5, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1166, dev=0x0132, revid=0xa3
	domain=1, bus=0, slot=6, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x106b, dev=0x0053, revid=0x00
	domain=1, bus=0, slot=7, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x106b, dev=0x0054, revid=0x00
	domain=1, bus=0, slot=8, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x106b, dev=0x0055, revid=0x00
	domain=1, bus=0, slot=9, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pcib2: <OFW PCI-PCI bridge> at device 1.0 on pci1
pcib2:   domain            1
pcib2:   secondary bus     4
pcib2:   subordinate bus   4
pcib2:   I/O decode        0xf000-0xfff
pcib2:   no prefetched decode
pci2: <OFW PCI bus> on pcib2
pci2: domain=1, physical bus=4
pcib3: <OFW PCI-PCI bridge> at device 2.0 on pci1
pcib3:   domain            1
pcib3:   secondary bus     5
pcib3:   subordinate bus   5
pcib3:   I/O decode        0xf000-0xfff
pcib3:   memory decode     0xfa500000-0xfa5fffff
pcib3:   no prefetched decode
pci3: <OFW PCI bus> on pcib3
pci3: domain=1, physical bus=5
found->	vendor=0x14e4, dev=0x166a, revid=0x03
	domain=1, bus=5, slot=4, func=0
	class=02-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x02b0, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=0
	powerspec 2  supports D0 D3  current D0
	MSI supports 8 messages, 64 bit
	map[10]: type Memory, range 64, base 0xfa530000, size 16, enabled
pcib3: requested memory range 0xfa530000-0xfa53ffff: good
	map[18]: type Memory, range 64, base 0xfa520000, size 16, enabled
pcib3: requested memory range 0xfa520000-0xfa52ffff: good
found->	vendor=0x14e4, dev=0x166a, revid=0x03
	domain=1, bus=5, slot=4, func=1
	class=02-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x02b0, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=0
	powerspec 2  supports D0 D3  current D0
	MSI supports 8 messages, 64 bit
	map[10]: type Memory, range 64, base 0xfa510000, size 16, enabled
pcib3: requested memory range 0xfa510000-0xfa51ffff: good
	map[18]: type Memory, range 64, base 0xfa500000, size 16, enabled
pcib3: requested memory range 0xfa500000-0xfa50ffff: good
bge0: <Broadcom BCM5714 B3, ASIC rev. 0x008003> mem 0xfa530000-0xfa53ffff,0xfa520000-0xfa52ffff irq 66 at device 4.0 on pci3
cpcht mapdev: start fa530000, len 65536
bge0: attempting to allocate 1 MSI vectors (8 supported)
bge0: using IRQ 8 for MSI
bge0: CHIP ID 0x00008003; ASIC REV 0x08; CHIP REV 0x80; PCI-X
miibus0: <MII bus> on bge0
brgphy0: <BCM5780 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0: OUI 0x000818, model 0x0035, rev. 0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: bpf attached
bge0: Ethernet address: 00:14:51:65:c5:f0
bge1: <Broadcom BCM5714 B3, ASIC rev. 0x008003> mem 0xfa510000-0xfa51ffff,0xfa500000-0xfa50ffff irq 67 at device 4.1 on pci3
cpcht mapdev: start fa510000, len 65536
bge1: attempting to allocate 1 MSI vectors (8 supported)
bge1: using IRQ 9 for MSI
bge1: CHIP ID 0x00008003; ASIC REV 0x08; CHIP REV 0x80; PCI-X
miibus1: <MII bus> on bge1
brgphy1: <BCM5780 10/100/1000baseTX PHY> PHY 1 on miibus1
brgphy1: OUI 0x000818, model 0x0035, rev. 0
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge1: bpf attached
bge1: Ethernet address: 00:14:51:65:c5:f1
pcib4: <OFW PCI-PCI bridge> at device 3.0 on pci1
pcib4:   domain            1
pcib4:   secondary bus     6
pcib4:   subordinate bus   6
pcib4:   I/O decode        0xf000-0xfff
pcib4:   no prefetched decode
pci4: <OFW PCI bus> on pcib4
pci4: domain=1, physical bus=6
pcib5: <OFW PCI-PCI bridge> at device 4.0 on pci1
pcib5:   domain            1
pcib5:   secondary bus     7
pcib5:   subordinate bus   7
pcib5:   I/O decode        0xf000-0xfff
pcib5:   no prefetched decode
pci5: <OFW PCI bus> on pcib5
pci5: domain=1, physical bus=7
pcib6: <OFW PCI-PCI bridge> at device 5.0 on pci1
pcib6:   domain            1
pcib6:   secondary bus     8
pcib6:   subordinate bus   8
pcib6:   I/O decode        0xf000-0xfff
pcib6:   no prefetched decode
pci6: <OFW PCI bus> on pcib6
pci6: domain=1, physical bus=8
pcib7: <OFW PCI-PCI bridge> at device 6.0 on pci1
pcib7:   domain            1
pcib7:   secondary bus     9
pcib7:   subordinate bus   9
pcib7:   I/O decode        0xf000-0xfff
pcib7:   no prefetched decode
pci7: <OFW PCI bus> on pcib7
pci7: domain=1, physical bus=9
pcib8: <OFW PCI-PCI bridge> at device 7.0 on pci1
pcib8:   domain            1
pcib8:   secondary bus     2
pcib8:   subordinate bus   2
pcib8:   I/O decode        0xf000-0xfff
pcib8:   memory decode     0xfa000000-0xfa3fffff
pcib8:   no prefetched decode
pci8: <OFW PCI bus> on pcib8
pci8: domain=1, physical bus=2
found->	vendor=0x106b, dev=0x0051, revid=0x00
	domain=1, bus=2, slot=15, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0004, statreg=0x84a0, cachelnsz=16 (dwords)
	lattimer=0x10 (480 ns), mingnt=0x40 (16000 ns), maxlat=0x40 (16000 ns)
	intpin=a, irq=255
	map[10]: type Memory, range 32, base 0xfa200000, size 21, memory disabled
pcib8: requested memory range 0xfa200000-0xfa3fffff: good
gem0: <Apple Shasta GMAC Ethernet> mem 0xfa200000-0xfa3fffff at device 15.0 on pci8
gem0: failed to allocate resources
device_attach: gem0 attach returned 6
pcib9: <OFW PCI-PCI bridge> at device 8.0 on pci1
pcib9:   domain            1
pcib9:   secondary bus     1
pcib9:   subordinate bus   1
pcib9:   I/O decode        0xf000-0xfff
pcib9:   memory decode     0x80000000-0x800fffff
pcib9:   no prefetched decode
pci9: <OFW PCI bus> on pcib9
pci9: domain=1, physical bus=1
found->	vendor=0x106b, dev=0x004f, revid=0x00
	domain=1, bus=1, slot=7, func=0
	class=ff-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0200, cachelnsz=16 (dwords)
	lattimer=0x10 (480 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[10]: type Memory, range 32, base 0x80000000, size 19, enabled
pcib9: requested memory range 0x80000000-0x8007ffff: good
found->	vendor=0x1033, dev=0x0035, revid=0x43
	domain=1, bus=1, slot=11, func=0
	class=0c-03-10, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0210, cachelnsz=16 (dwords)
	lattimer=0x10 (480 ns), mingnt=0x01 (250 ns), maxlat=0x2a (10500 ns)
	intpin=a, irq=0
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0x80082000, size 12, memory disabled
pcib9: requested memory range 0x80082000-0x80082fff: good
found->	vendor=0x1033, dev=0x0035, revid=0x43
	domain=1, bus=1, slot=11, func=1
	class=0c-03-10, hdrtype=0x00, mfdev=0
	cmdreg=0x0000, statreg=0x0210, cachelnsz=16 (dwords)
	lattimer=0x10 (480 ns), mingnt=0x01 (250 ns), maxlat=0x2a (10500 ns)
	intpin=b, irq=0
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0x80081000, size 12, memory disabled
pcib9: requested memory range 0x80081000-0x80081fff: good
found->	vendor=0x1033, dev=0x00e0, revid=0x04
	domain=1, bus=1, slot=11, func=2
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0004, statreg=0x0210, cachelnsz=16 (dwords)
	lattimer=0x10 (480 ns), mingnt=0x10 (4000 ns), maxlat=0x22 (8500 ns)
	intpin=c, irq=0
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0x80080000, size  8, memory disabled
pcib9: requested memory range 0x80080000-0x800800ff: good
macio0: <Shasta I/O Controller> mem 0x80000000-0x8007ffff at device 7.0 on pci9
macgpio0: <MacIO GPIO Controller> mem 0x50-0x8a on macio0
macgpio0: <gpio, smu-interrupt> gpio 13 irq 48 (no driver attached)
macgpio0: <gpio, programmer-switch> gpio 12 irq 47 (no driver attached)
macgpio0: <gpio, chip-fault> gpio 14 irq 49 (no driver attached)
macgpio0: <gpio, slewing-done> gpio 56 irq 91 (no driver attached)
macgpio0: <gpio, mlb-good> gpio 19 (no driver attached)
macgpio0: <gpio, vdnap0> gpio 20 (no driver attached)
macgpio0: <gpio, timebase-enable> gpio 38 irq 73 (no driver attached)
macgpio0: <gpio, amp-mute> gpio 48 (no driver attached)
macgpio0: <gpio, dig-hw-reset-c> gpio 9 (no driver attached)
macgpio0: <gpio, codec-error-irq> gpio 50 irq 85 (no driver attached)
macgpio0: <gpio, codec-clock-mux> gpio 49 (no driver attached)
macgpio0: <gpio, headphone-detect> gpio 44 irq 79 (no driver attached)
macgpio0: <gpio, headphone-mute> gpio 47 (no driver attached)
macgpio0: <gpio, hw-reset> gpio 10 (no driver attached)
macgpio0: <gpio, lineout-detect> gpio 40 irq 75 (no driver attached)
macgpio0: <gpio, linein-detect> gpio 42 irq 77 (no driver attached)
macgpio0: <gpio, lineout-mute> gpio 46 (no driver attached)
scc0: <Zilog Z8530 dual channel SCC> mem 0x13000-0x13fff,0x8400-0x84ff,0x8500-0x85ff,0x8600-0x86ff,0x8700-0x87ff irq 23,17,18,24,19,20 on macio0
scc0: resetting hardware
uart0: <z8530, channel A> on scc0
uart0: fast interrupt
uart1: <z8530, channel B> on scc0
uart1: fast interrupt
scc0: fast interrupt
iichb1: <Keywest I2C controller> mem 0x18000-0x18fff irq 27 on macio0
iichb1: Revision: A1
iicbus1: <OFW I2C bus> on iichb1
iicbus1: <unknown card> at addr 0x8c
iicbus1: <unknown card> at addr 0x24
macio0: <i2s, i2s> mem 0x10000-0x10fff,0x8000-0x80ff,0x8100-0x81ff irq 28,11,12,30,15,16 (no driver attached)
ohci0: <NEC uPD 9210 USB controller> mem 0x80082000-0x80082fff irq 70 at device 11.0 on pci9
cpcht mapdev: start 80082000, len 4096
usbus0: <NEC uPD 9210 USB controller> on ohci0
usbus0: bpf attached
ohci0: usbpf attached
ohci1: <NEC uPD 9210 USB controller> mem 0x80081000-0x80081fff irq 70 at device 11.1 on pci9
cpcht mapdev: start 80081000, len 4096
usbus1: <NEC uPD 9210 USB controller> on ohci1
usbus1: bpf attached
ohci1: usbpf attached
ehci0: <NEC uPD 720100 USB 2.0 controller> mem 0x80080000-0x800800ff irq 70 at device 11.2 on pci9
cpcht mapdev: start 80080000, len 256
usbus2: EHCI version 1.0
usbus2: <NEC uPD 720100 USB 2.0 controller> on ehci0
usbus2: bpf attached
ehci0: usbpf attached
pcib10: <OFW PCI-PCI bridge> at device 9.0 on pci1
pcib10:   domain            1
pcib10:   secondary bus     3
pcib10:   subordinate bus   3
pcib10:   I/O decode        0xf000-0xfff
pcib10:   memory decode     0xfa400000-0xfa4fffff
pcib10:   no prefetched decode
pci10: <OFW PCI bus> on pcib10
pci10: domain=1, physical bus=3
found->	vendor=0x1166, dev=0x0240, revid=0x00
	domain=1, bus=3, slot=12, func=0
	class=01-01-8f, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x0220, cachelnsz=0 (dwords)
	lattimer=0x10 (480 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[10]: type I/O Port, range 32, base 0, size  3, port disabled
	map[14]: type I/O Port, range 32, base 0, size  2, port disabled
	map[18]: type I/O Port, range 32, base 0, size  3, port disabled
	map[1c]: type I/O Port, range 32, base 0, size  2, port disabled
	map[20]: type I/O Port, range 32, base 0, size  4, port disabled
	map[24]: type Memory, range 32, base 0xfa402000, size 13, enabled
pcib10: requested memory range 0xfa402000-0xfa403fff: good
found->	vendor=0x106b, dev=0x0050, revid=0x00
	domain=1, bus=3, slot=13, func=0
	class=ff-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0000, statreg=0x0200, cachelnsz=16 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[10]: type Memory, range 32, base 0xfa404000, size 14, memory disabled
pcib10: requested memory range 0xfa404000-0xfa407fff: good
found->	vendor=0x106b, dev=0x0052, revid=0x00
	domain=1, bus=3, slot=14, func=0
	class=0c-00-10, hdrtype=0x00, mfdev=0
	cmdreg=0x0000, statreg=0x0290, cachelnsz=16 (dwords)
	lattimer=0xf8 (7440 ns), mingnt=0x0c (3000 ns), maxlat=0x18 (6000 ns)
	intpin=a, irq=0
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0xfa400000, size 12, memory disabled
pcib10: requested memory range 0xfa400000-0xfa400fff: good
atapci0: <ServerWorks K2 SATA150 controller> mem 0xfa402000-0xfa403fff irq 10 at device 12.0 on pci10
atapci0: Lazy allocation of 0x10 bytes rid 0x20 type 4 at 0
cpcht mapdev: start f4000000, len 16
cpcht mapdev: start fa402000, len 8192
ata2: <ATA channel 0> on atapci0
ata2: hardware reset ...
ata2: SATA connect time=0ms status=00000113
ata2: reset tp1 mask=01 ostat0=50 ostat1=00
ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata2: reset tp2 stat0=50 stat1=00 devices=0x1
ata3: <ATA channel 1> on atapci0
ata3: hardware reset ...
ata3: SATA connect time=0ms status=00000113
ata3: reset tp1 mask=01 ostat0=d0 ostat1=00
ata3: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata3: reset tp2 stat0=50 stat1=00 devices=0x1
ata4: <ATA channel 2> on atapci0
ata4: hardware reset ...
ata4: SATA connect timeout status=00000000
ata5: <ATA channel 3> on atapci0
ata5: hardware reset ...
ata5: SATA connect timeout status=00000000
cpcht mapdev: start fa404000, len 16384
ata0: <Shasta Kauai ATA Controller> mem 0xfa404000-0xfa407fff irq 38 at device 13.0 on pci10
ata0: reset tp1 mask=03 ostat0=00 ostat1=00
ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=00 stat1=00 devices=0x10000
fwohci0: vendor=106b, dev=52
fwohci0: vendor=106b, dev=52
fwohci0: <1394 Open Host Controller Interface> mem 0xfa400000-0xfa400fff irq 39 at device 14.0 on pci10
cpcht mapdev: start fa400000, len 4096
fwohci0: OHCI version 1.0 (ROM=0)
fwohci0: No. of Isochronous channels is 8.
fwohci0: EUI64 00:11:24:ff:fe:e5:30:e8
fwohci0: invalid speed 7 (fixed to 3).
fwohci0: Phy 1394a available S800, 3 ports.
fwohci0: Link S800, max_rec 4096 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:11:24:e5:30:e8
fwe0: bpf attached
fwe0: Ethernet address: 02:11:24:e5:30:e8
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: fwohci_intr_core: node_id=0x00000001, SelfID Count=1, CYCLEMASTER mode
sc1: no video adapter found.
smu0: <Apple System Management Unit> on nexus0
smu0: registered as a time-of-day clock (resolution 1000us, adjustment 0.000500000s)
iichb2: <SMU I2C controller> on smu0
iicbus2: <OFW I2C bus> on iichb2
smusat0: <SMU Satellite Sensors> at addr 0xb0 on iicbus2
smusat1: <SMU Satellite Sensors> at addr 0xb2 on iicbus2
iicbus2: <unknown card> at addr 0xd4
iichb3: <SMU I2C controller> on smu0
iicbus3: <OFW I2C bus> on iichb3
sc1: no video adapter found.
nexus0: <aliases>, type (unknown) (no driver attached)
sc0: <System console> on nexus0
sc0: Unknown <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: scteken (teken terminal)
procfs registered
Timecounter "timebase" frequency 33333333 Hz quality 0
Event timer "decrementer" frequency 33333333 Hz quality 1000
Timecounters tick every 1.000 msec
vlan: initialized, using hash tables with chaining
lo0: bpf attached
ata0: Identifying devices: 00010000
ata0: New devices: 00010000
firewire0: 2 nodes, maxhop <= 1 cable IRM irm(1)  (me) 
firewire0: bus manager 1 
interrupt storm detected on "irq38:"; throttling interrupt source
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
ugen0.1: <NEC> at usbus0
uhub0: <NEC OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <NEC> at usbus1
uhub1: <NEC OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
usbus2: 480Mbps High Speed USB v2.0
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA66 cable=80 wire
ugen2.1: <NEC> at usbus2
uhub2: <NEC EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
acd0: setting UDMA66
acd0: <PIONEER DVD-RW DVR-110D/AA06> DVDR drive at ata0 as master
acd0: read 5511KB/s (5511KB/s) write 5511KB/s (5511KB/s), 2000KB buffer, UDMA66 
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, DVDR, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ata2: Identifying devices: 00000001
ata2: New devices: 00000001
ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad0: setting UDMA100
ad0: 305245MB <SAMSUNG HD322HJ 1AG01113> at ata2-master UDMA100 SATA 1.5Gb/s
ad0: 625142448 sectors [620181C/16H/63S] 16 sectors/interrupt 1 depth queue
ata3: Identifying devices: 00000001
ata3: New devices: 00000001
uhub1: 2 ports with 2 removable, self powered
ata3-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
uhub0: 3 ports with 3 removable, self powered
ad1: setting UDMA100
ad1: 239372MB <Maxtor 6L250M0 BANC1G10> at ata3-master UDMA100 SATA 1.5Gb/s
ad1: 490234752 sectors [486344C/16H/63S] 16 sectors/interrupt 1 depth queue
ata4: Identifying devices: 00000000
ata4: New devices: 00000000
ata5: Identifying devices: 00000000
ata5: New devices: 00000000
max66900: 2 sensors detected.
max66900: Sensors
max66900: Location : BACKSIDE ID: 6
max66900: Location : KODIAK DIODE ID: 7
max66901: 2 sensors detected.
max66901: Sensors
max66901: Location : TUNNEL ID: 1
max66901: Location : TUNNEL HEATSINK ID: 2
GEOM: new disk ad0
GEOM: new disk ad1
uhub2: 5 ports with 5 removable, self powered
ugen1.2: <Mitsumi Electric> at usbus1
uhub3: <Mitsumi Electric Hub in Apple Extended USB Keyboard, class 9/0, rev 1.10/4.20, addr 2> on usbus1
uhub3: 3 ports with 2 removable, bus powered
(probe0:sbp0:0:0:0): Error 22, Unretryable error
(probe1:sbp0:0:1:0): Error 22, Unretryable error
(probe2:sbp0:0:2:0): Error 22, Unretryable error
(probe3:sbp0:0:3:0): Error 22, Unretryable error
(probe4:sbp0:0:4:0): Error 22, Unretryable error
(probe5:sbp0:0:5:0): Error 22, Unretryable error
(probe6:sbp0:0:6:0): Error 22, Unretryable error
WARNING: WITNESS option enabled, expect reduced performance.
Trying to mount root from ufs:/dev/ad0s3 [rw]...
start_init: trying /sbin/init
acquiring duplicate lock of same type: "pmap"
 1st pmap @ /usr/src/sys/powerpc/aim/mmu_oea64.c:1363
 2nd pmap @ /usr/src/sys/powerpc/aim/mmu_oea64.c:1439
KDB: stack backtrace:
0xe098a5b0: at kdb_backtrace+0x4c
0xe098a620: at _witness_debugger+0x3c
0xe098a640: at witness_checkorder+0x4dc
0xe098a6a0: at _mtx_lock_flags+0xc4
0xe098a6d0: at moea64_uma_page_alloc+0x78
0xe098a700: at keg_alloc_slab+0xfc
0xe098a750: at keg_fetch_slab+0x1c0
0xe098a780: at zone_fetch_slab+0x70
0xe098a7b0: at uma_zalloc_arg+0x5ac
0xe098a810: at moea64_pvo_enter+0x2dc
0xe098a870: at moea64_enter_locked+0x27c
0xe098a8b0: at moea64_enter_quick+0x94
0xe098a8f0: at pmap_enter_quick+0x8c
0xe098a920: at vm_fault_hold+0x1884
0xe098aa40: at vm_fault+0x18
0xe098aa60: at trap_pfault+0x138
0xe098aaa0: at trap+0x10c
0xe098ab60: at powerpc_interrupt+0x110
0xe098ab90: user ISI trap by 0x183ed00: srr1=0x4000d032
            r1=0x7fffc970 cr=0x54000042 xer=0 ctr=0
ugen1.3: <vendor 0x04b3> at usbus1
ums0: <vendor 0x04b3 product 0x310b, class 0/0, rev 2.00/1.10, addr 3> on usbus1
ums0: 3 buttons and [XYZ] coordinates ID=0
ugen1.4: <Mitsumi Electric> at usbus1
ukbd0: <Mitsumi Electric Apple Extended USB Keyboard, class 0/0, rev 1.10/4.20, addr 4> on usbus1
kbd: new array size 4
kbd1 at ukbd0
kbd1: ukbd0, generic (0), config:0x0, flags:0x3d0000
uhid0: <Mitsumi Electric Apple Extended USB Keyboard, class 0/0, rev 1.10/4.20, addr 4> on usbus1
bge0: link DOWN