---<>--- Copyright (c) 1992-2020 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.2-RELEASE-p7 GENERIC amd64 FreeBSD clang version 10.0.1 (git@github.com:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2) VT(vga): resolution 640x480 CPU: AMD A6-3620 APU with Radeon(tm) HD Graphics (2196.05-MHz K8-class CPU) Origin="AuthenticAMD" Id=0x300f10 Family=0x12 Model=0x1 Stepping=0 Features=0x178bfbff Features2=0x802009 AMD Features=0xee500800 AMD Features2=0x37ff SVM: NP,NRIP,NAsids=64 TSC: P-state invariant, performance statistics real memory = 17179869184 (16384 MB) avail memory = 16054120448 (15310 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) random: unblocking device. Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20200430/tbfadt-796) ioapic0 irqs 0-23 on motherboard Launching APs: 2 3 1 Timecounter "TSC-low" frequency 1098023546 Hz quality 800 random: entropy device external interface kbd1 at kbdmux0 000.000023 [4336] netmap_init netmap: loaded module [ath_hal] loaded module_register_init: MOD_LOAD (vesa, 0xffffffff81115e70, 0) error 19 nexus0 efirtc0: on motherboard efirtc0: registered as a time-of-day clock, resolution 1.000000s vtvga0: on motherboard cryptosoft0: on motherboard acpi0: on motherboard acpi0: Power Button (fixed) unknown: I/O range not supported cpu0: on acpi0 attimer0: port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: port 0x70-0x71 irq 8 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 hpet0: iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 450 Event timer "HPET1" frequency 14318180 Hz quality 450 Event timer "HPET2" frequency 14318180 Hz quality 450 Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 vgapci0: port 0xf000-0xf0ff mem 0xc0000000-0xcfffffff,0xfef00000-0xfef3ffff irq 18 at device 1.0 on pci0 vgapci0: Boot video device hdac0: mem 0xfef44000-0xfef47fff irq 19 at device 1.1 on pci0 pcib1: irq 19 at device 7.0 on pci0 pci1: on pcib1 re0: port 0xe000-0xe0ff mem 0xd0004000-0xd0004fff,0xd0000000-0xd0003fff irq 19 at device 0.0 on pci1 re0: Using 1 MSI-X message re0: Chip rev. 0x2c800000 re0: MAC rev. 0x00100000 miibus0: on re0 rgephy0: PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Using defaults for TSO: 65518/35/2048 re0: Ethernet address: f8:0f:41:3c:95:57 re0: netmap queues/slots: TX 1/256, RX 1/256 xhci0: mem 0xfef4a000-0xfef4bfff irq 18 at device 16.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA xhci0: Unable to map MSI-X table usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 xhci1: mem 0xfef48000-0xfef49fff irq 17 at device 16.1 on pci0 xhci1: 32 bytes context size, 64-bit DMA xhci1: Unable to map MSI-X table usbus1 on xhci1 usbus1: 5.0Gbps Super Speed USB v3.0 ahci0: port 0xf140-0xf147,0xf130-0xf133,0xf120-0xf127,0xf110-0xf113,0xf100-0xf10f mem 0xfef51000-0xfef517ff irq 19 at device 17.0 on pci0 ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier supported ahcich0: at channel 0 on ahci0 ahcich1: at channel 1 on ahci0 ahcich2: at channel 2 on ahci0 ahcich3: at channel 3 on ahci0 ahcich4: at channel 4 on ahci0 ahcich5: at channel 5 on ahci0 ohci0: mem 0xfef50000-0xfef50fff irq 18 at device 18.0 on pci0 usbus2 on ohci0 usbus2: 12Mbps Full Speed USB v1.0 ehci0: mem 0xfef4f000-0xfef4f0ff irq 17 at device 18.2 on pci0 usbus3: EHCI version 1.0 usbus3 on ehci0 usbus3: 480Mbps High Speed USB v2.0 ohci1: mem 0xfef4e000-0xfef4efff irq 18 at device 19.0 on pci0 usbus4 on ohci1 usbus4: 12Mbps Full Speed USB v1.0 ehci1: mem 0xfef4d000-0xfef4d0ff irq 17 at device 19.2 on pci0 usbus5: EHCI version 1.0 usbus5 on ehci1 usbus5: 480Mbps High Speed USB v2.0 hdac1: mem 0xfef40000-0xfef43fff irq 16 at device 20.2 on pci0 isab0: at device 20.3 on pci0 isa0: on isab0 pcib2: at device 20.4 on pci0 pci2: on pcib2 ohci2: mem 0xfef4c000-0xfef4cfff irq 18 at device 20.5 on pci0 usbus6 on ohci2 usbus6: 12Mbps Full Speed USB v1.0 amdtemp0: on hostb4 acpi_button0: on acpi0 atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model IntelliMouse, device ID 3 orm0: at iomem 0xc0000-0xcefff pnpid ORM0000 on isa0 hwpstate0: on cpu0 Timecounters tick every 1.000 msec hdacc0: at cad 0 on hdac0 hdaa0: at nid 1 on hdacc0 pcm0: at nid 3 on hdaa0 hdacc1: at cad 1 on hdac1 hdaa1: at nid 1 on hdacc1 pcm1: at nid 20,27 and 24,25,26 on hdaa1 ugen1.1: <0x1022 XHCI root HUB> at usbus1 ugen0.1: <0x1022 XHCI root HUB> at usbus0 ugen4.1: at usbus4 uhub0: ugen5.1: at usbus5 <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 uhub3: on usbus5 uhub2: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 ugen6.1: at usbus6 uhub1: on usbus4 ugen3.1: at usbus3 uhub4: on usbus6 uhub5: on usbus3 ugen2.1: at usbus2 uhub6: on usbus2 Trying to mount root from ufs:/dev/ada0p2 [rw]... Root mount waiting for: usbus0 usbus1 CAM usbus2 usbus3 usbus4 usbus5 usbus6 ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: ACS-2 ATA SATA 3.x device ada0: Serial Number 000000001204032B6D4C ada0: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 8192bytes) ada0: Command Queueing enabled ada0: 122104MB (250069680 512 byte sectors) ada0: quirks=0x1<4K> cd0 at ahcich1 bus 0 scbus1 target 0 lun 0 cd0: Removable CD-ROM SCSI device cd0: Serial Number K21BAOI3248 cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed uhub4: 2 ports with 2 removable, self powered uhub1: 5 ports with 5 removable, self powered uhub6: 5 ports with 5 removable, self powered uhub2: 4 ports with 4 removable, self powered uhub0: 4 ports with 4 removable, self powered Root mount waiting for: usbus3 usbus5 uhub5: 5 ports with 5 removable, self powered uhub3: 5 ports with 5 removable, self powered Root mount waiting for: usbus3 usbus5 ugen3.2: at usbus3 umass0 on uhub5 umass0: on usbus3 umass0: SCSI over Bulk-Only; quirks = 0x4000 umass0:6:0: Attached to scbus6 da0 at umass-sim0 bus 0 scbus6 target 0 lun 0 da0: Removable Direct Access SCSI device da0: Serial Number 20071114173400000 da0: 40.000MB/s transfers da0: Attempt to query device size failed: NOT READY, Medium not present da0: quirks=0x2 ugen4.2: at usbus4 ugen5.2: at usbus5 umass1 on uhub3 umass1: on usbus5 umass1: SCSI over Bulk-Only; quirks = 0x4101 umass1:7:1: Attached to scbus7 Root mount waiting for: CAM da1 at umass-sim1 bus 1 scbus7 target 0 lun 0 da1: Removable Direct Access SPC-2 SCSI device da1: Serial Number A592E432 da1: 40.000MB/s transfers da1: 7680MB (15728640 512 byte sectors) da1: quirks=0x2 mountroot: waiting for device /dev/ada0p2... [drm] radeon kernel modesetting enabled. drmn0: on vgapci0 vgapci0: child drmn0 requested pci_enable_io vgapci0: child drmn0 requested pci_enable_io [drm] initializing kernel modesetting (SUMO 0x1002:0x964A 0x1025:0x061D 0x00). [drm:radeon_device_init] Unable to find PCI I/O BAR [drm:radeon_atombios_init] Unable to find PCI I/O BAR; using MMIO for ATOM IIO ATOM BIOS: Acer drmn0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used) drmn0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF Failed to add WC MTRR for [0xc0000000-0xcfffffff]: -22; performance may suffer [drm] Detected VRAM RAM=512M, BAR=256M [drm] RAM width 32bits DDR [TTM] Zone kernel: Available graphics memory: 8085314 kiB [TTM] Zone dma32: Available graphics memory: 2097152 kiB [TTM] Initializing pool allocator [drm] radeon: 512M of VRAM memory ready [drm] radeon: 1024M of GTT memory ready. [drm] Loading SUMO Microcode radeon/SUMO_pfp.bin: could not load firmware image, error 2 drmn0: fail (0) to get firmware image with name: radeon/SUMO_pfp.bin drmn0: successfully loaded firmware image with mapped name: radeon_SUMO_pfp_bin radeon/SUMO_me.bin: could not load firmware image, error 2 drmn0: fail (0) to get firmware image with name: radeon/SUMO_me.bin drmn0: successfully loaded firmware image with mapped name: radeon_SUMO_me_bin radeon/SUMO_rlc.bin: could not load firmware image, error 2 drmn0: fail (0) to get firmware image with name: radeon/SUMO_rlc.bin drmn0: successfully loaded firmware image with mapped name: radeon_SUMO_rlc_bin [drm] Internal thermal controller without fan control [drm] Found smc ucode version: 0x00011100 [drm] radeon: dpm initialized radeon/SUMO_uvd.bin: could not load firmware image, error 2 drmn0: fail (0) to get firmware image with name: radeon/SUMO_uvd.bin drmn0: successfully loaded firmware image with mapped name: radeon_SUMO_uvd_bin [drm] GART: num cpu pages 262144, num gpu pages 262144 [drm] PCIE GART of 1024M enabled (table at 0x0000000000162000). drmn0: WB enabled drmn0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0x0xfffff8000758bc00 drmn0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0x0xfffff8000758bc0c drmn0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0x0xfffff800c0072118 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [drm] Driver supports precise vblank timestamp query. drmn0: radeon: MSI limited to 32-bit drmn0: radeon: using MSI. [drm] radeon: irq initialized. [drm] ring test on 0 succeeded in 1 usecs [drm] ring test on 3 succeeded in 3 usecs [drm] ring test on 5 succeeded in 1 usecs [drm] UVD initialized successfully. [drm] ib test on ring 0 succeeded in 0 usecs [drm] ib test on ring 3 succeeded in 0 usecs [drm] ib test on ring 5 succeeded [drm] Connector VGA-1: get mode from tunables: [drm] - kern.vt.fb.modes.VGA-1 [drm] - kern.vt.fb.default_mode [drm] Connector HDMI-A-1: get mode from tunables: [drm] - kern.vt.fb.modes.HDMI-A-1 [drm] - kern.vt.fb.default_mode [drm] Radeon Display Connectors [drm] Connector 0: [drm] VGA-1 [drm] HPD2 [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c [drm] Encoders: [drm] CRT1: INTERNAL_UNIPHY2 [drm] CRT1: NUTMEG [drm] Connector 1: [drm] HDMI-A-1 [drm] HPD1 [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c [drm] Encoders: [drm] DFP1: INTERNAL_UNIPHY2 [drm] fb mappable at 0xC0366000 [drm] vram apper at 0xC0000000 [drm] size 8294400 [drm] fb depth is 24 [drm] pitch is 7680 VT: Replacing driver "vga" with new "fb". start FB_INFO: type=11 height=1080 width=1920 depth=32 cmsize=16 size=8294400 pbase=0xc0366000 vbase=0xfffff800c0366000 name=drmn0 flags=0x0 stride=7680 bpp=32 cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000 end FB_INFO drmn0: fb0: radeondrmfb frame buffer device [drm] Initialized radeon 2.50.0 20080528 for drmn0 on minor 0 intsmb0: at device 20.0 on pci0 smbus0: on intsmb0 lo0: link state changed to UP re0: link state changed to DOWN ums0 on uhub1 ums0: on usbus4 ums0: 8 buttons and [XYZ] coordinates ID=0 re0: link state changed to UP Security policy loaded: MAC/ntpd (mac_ntpd)